DUAL XDVD179BT (01) PDF MANUAL

DUAL XDVD179BT (01) PDF SUMMARY:

What are some safety notes to consider when using the XDVD179BT?

The DVD video display will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when the vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

---

What is a crucial instruction regarding the operation of the unit while driving?

The driver must not operate the unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction, which could result in serious injury or death.

---

What should be done if a user resides in a jurisdiction which prohibits the installation of monitors/DVD players if the screen is visible from the driver’s seat?

The unit must not be installed so that the screen is visible from the driver’s seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only.

---

When is this unit designed to be operated?

This unit is designed so that it may be operated only when the vehicle is in “Park” and the parking brake is fully engaged.

---

What is a critical step when installing this unit to ensure the parking brake lock-out feature is operable?

The installer must connect the parking brake detect wire to the parking brake mechanism. Do not simply ground the parking brake detect wire to a metal portion of the vehicle.

---

What should the owner/user not attempt to do once the parking brake lock-out feature is installed?

The owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit.

---

What volume level should be used when operating this unit?

Keep the unit’s volume level low enough so that the vehicle’s occupants can hear traffic-related sounds such as police and emergency vehicles.

---

What are some important steps to take before attempting to install or operate the XDVD179BT?

• Please read all instructions carefully before attempting to install or operate.
• It is highly recommended that your DUAL XDVD179BT is installed by a professional installer or an authorized dealer.
• This product is only for use in vehicles with 12VDC negative ground only.

---

What should you do to prevent damage or injury during installation?

• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
• Use only the provided hardware and wire harness.
• You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.
• If you experience problems during installation, consult your nearest DUAL dealer.
• If the unit malfunctions, reset the unit as described on page 10 first. If the problem still persists, consult your nearest DUAL dealer or call tech assistance @ 1-866-382-5476.

---

How should you clean the monitor?

To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.

---

What should you do if the LCD is damaged or broken?

Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

---

What should you do before you start the installation?

• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

---

What are the steps to getting started?

• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness as shown on page 6. Consult a qualified technician if you are unsure.
• Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
• Reconnect negative battery terminal, and test for correct operation.
• Snap trim ring into place (if required).
• Slide unit into mounting sleeve to secure.

---

What is the size of the mounting sleeve opening?

The mounting sleeve opening dimensions are 7-3/16” x 2-1/16” (183 mm x 53 mm).

---

What type of fuse does the unit use?

The unit uses (1) 10 amp ATM mini style fuse located on the power connector.

---

What is the purpose of the rear camera input?

A rear view camera (not included) can be used with the Camera input.

---

What are the control locations on the unit?

• Eject
• Auxiliary Input
• USB Port
• Microphone
• Tune/Track Down
• Mute / End Call
• Volume Up/Down / Talk
• Band
• Voice Control
• Open / Power
• Mode
• Tune/Track Up
• Standby Mode or Dimmer
• Voice Control
• Tilt Screen Up
• Tilt Screen Down
• Navigation Hot Button

---

What are the touch screen controls on the bottom of each screen used for?

The touch screen controls on the bottom of each screen allow direct access to important features during any mode of operation.

---

How do you turn the unit on or off?

Momentarily press the button to turn the unit on or off.

---

How do you adjust the volume?

Rotate the volume knob to increase or decrease the volume level.

---

How do you mute the audio?

Momentarily press MUTE to silence the audio. Momentarily press MUTE again to return to the previously selected volume. Rotating the volume knob while the volume is muted will also cancel the mute function.

---

How do you switch between input modes?

Press MODE to step through all available input modes: Radio, Disc, Settings, Rear Camera, USB, Bluetooth Phone, Bluetooth Audio and Auxiliary Input. Modes of operation are indicated on the display and/ or the monitor. An optional USB device must be inserted to appear in the mode selection string.

---

How do you use the auxiliary input?

Connect external audio devices to the 3.5mm auxiliary input on the front panel.

---

How do you use the USB port?

Insert a USB device to play MP3 files or view JPG photos.

---

How do you open or close the LCD screen?

Press OPEN to open or close the LCD screen.

---

How do you adjust the screen angle?

Press UPp or DOWN q to adjust the screen angle up or down.

---

How do you access the Main Menu screen?

When the monitor is open, press the house icon in the top left corner to access the Main Menu screen.

---

How do you access the Setup menu?

From the Main Menu screen, press SETTINGS to access the Setup menu.

---

What are the General options in the Setup menu?

• OSD Language – Select English Only.
• Wallpaper – Select between three available wallpaper options.
• Screen Calibration – Select to calibrate the touch screen.
• Radio Area – Select your current geographic area: Europe, USA, South America, Russia and Asia.
• Time Setting – Adjust the current time (hours and minutes) and choose between a 12-hour and 24-hour clock.
• Beep – Select to turn the audible beep On or Off.
• Camera – Select to turn the rear camera On or Off.
• Version – Select to view information about the unit.
• Restore Default – Select to restore the unit to default settings.

---

What are the Audio options in the Setup menu?

• Sound Effect – Select to access three sound effect sub-menus.
• EQ – Select from any preset equalization curve (Classic, Rock, Pop, Jazz, Beat, Flat) or use custom settings (User).
• Loudness – Turn the Loudness setting On or Off.

---

What are the Video options in the Setup menu?

• Aspect Ratio – Select desired aspect ratio: 4:3PS, 4:3LB or 16:9.
• Adjust – Select to adjust levels of Brghtness, Contrast, Hue, Saturation and Sharpness.
• Panel – Select to choose backlight settings: 10s, 20s, 30s or Off.

---

What are the Bluetooth options in the Setup menu?

• Auto Connect – Turn auto connect feature On or Off.
• Auto Answer – Turn auto answer feature On or Off.

---

How do you access the radio?

Select the Radio icon from the Main Menu screen.

---

What are the radio operation functions?

• Press to return to Main Menu screen.
• Displays current mode of operation.
• Press << to tune radio to a lower frequency. Press < to tune the unit down one step at a time.
• Press to toggle between 2 AM and 3 FM bands.
• Press to toggle between Local and DIstance tuning.
• Press >> to tune radio to a higher frequency. Press > to tune the unit up one step at a time.
• Press to scan presets and listen to the first 10 seconds of each. Press again to stop scanning and listen to the station. Press and hold to automatically find and store the strongest stations as presets.
• Press to toggle between Stereo and Mono tuning.
• Press and hold to set the current station in that preset spot. Press momentarily to recall the desired preset and begin playback.

---

How do you play audio files from a disc or MP3 files from a disc or USB device?

Insert disc or device and playback will begin automatically. To return to disc or USB playback from another mode of operation, select the corresponding icon from the Main Menu.

---

What are the CD/USB operation functions?

• Disc Playback – Insert disc into the slot, and playback will begin automatically.
• USB Playback – Insert a USB device into the USB slot on the side of the unit.
• Press to return to Main Menu screen.
• Displays current mode of operation.
• Press to select a repeat option: Repeat 1, Repeat Folder or Repeat Off.
• Press to enable or disable random playback.
• Press to go back to the previous file or track.
• Press to pause or resume playback.
• Press to advance to the next file or track.
• Press to access all folders on device.

---

What are the compatible file systems for CD/DVD?

• ISO9660 Level 1, Level 2
• ISO9660 Extension JOLIET
• Filename 32 bytes
• File Extension: .mp3/.MP3/.Mp3/.mP3
• MPEG Format: MPEG 1, MPEG 2, MPEG 2.5
• Sampling Frequency: MPEG 1 32/44.1/48kHz, MPEG 2 12/16/22.05/24kHz, MPEG 2.5 8/11.025/12kHz
• Bitrate: MPEG 1 32 ~ 320kbps, MPEG 2 8 ~ 160kbps, MPEG 2.5 8 ~ 160kbps

---

What is the directory depth, file name length, total file number and total folder number supported for CD/DVD?

• Directory Depth: Unlimited
• File Name Length: 32 bytes
• Total File Number: 2000 files
• Total Folder Number: 200 folders
• File Number via Folder: 2000 files

---

What are the compatible MP3 ID3 tags?

• ver.1.x
• ver.2.x
• Title, Artist, Album

---

What is the important note regarding JPG files on the in-dash monitor while the vehicle is moving?

It is not possible to view JPG files on the in-dash monitor while the vehicle is moving. This is a safety feature to prevent driver distraction. The JPG image viewer function will only operate when vehicle is in park and the parking brake is engaged.

---

What are the compatible file systems for USB?

• FAT 16/FAT 32
• File Extension: .mp3/.MP3/.Mp3/.mP3
• MPEG Format: MPEG 1, MPEG 2, MPEG 2.5
• Sampling Frequency: MPEG 1 32/44.1/48kHz, MPEG 2 12/16/22.05/24kHz, MPEG 2.5 8/11.025/12kHz
• Bitrate: MPEG 1 32 ~ 320kbps, MPEG 2 8 ~ 160kbps, MPEG 2.5 8 ~ 160kbps

---

What is the directory depth, file name length, total file number and total folder number supported for USB?

• Directory Depth: Unlimited
• File Name Length: 32 bytes
• Total File Number: 2000 files
• Total Folder Number: 200 folders
• File Number via Folder: 2000 files

---

What are the compatible MP3 ID3 tags for USB?

• ver.1.x
• ver.2.x
• Title, Artist, Album

---

What is an important note regarding JPG files when in USB mode?

For USB mode, it is not possible to view JPG files on the in-dash monitor while the vehicle is moving. This is a safety feature to prevent driver distraction. The JPG image viewer function will only operate when vehicle is in park and the parking brake is engaged.

---

What types of discs/files are compatible with this unit?

• CD-DA, CD-ROM (ISO), CD-R, CD-RW
• DVD Video, DVD+R/RW, DVD-R/RW

---

What types of discs/files are not compatible with this unit?

• WMA files that are protected by DRM (Digital Rights Management)
• WMA lossless format
• Discs recorded with Track At Once or packet writing
• MP3 PRO format, MP3 playlists
• RMP format
• WAV format
• WMV format
• AAC, protected AAC, M4A format
• Some recordable DVDs and CDs may be incompatible with this unit, depending on media type and recording method.

---

What is the playback order for MP3 files?

MP3 playback sequence begins in the root folder of the disc or USB flash drive. Any empty folders or folders that do not include MP3/JPG files are skipped.

---

What are the ISO9660 standards for folder/file names?

• Maximum nested folder depth is 8 (including the root folder).
• Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and “_” (underscore). Some characters may not be displayed correctly, depending on the character type.
• This device can play back discs in Joliet and other standards that conform to ISO9660. MP3 written in the formats other than the above may not play and/or their file names or folder names may not be displayed properly.

---

What settings should you use when ripping MP3 files for the best results?

Use the following settings when ripping MP3 files: 128kbps or higher constant bit rate 44.1kHz or higher sampling frequency.

---

How do you insert a disc?

Insert the disc into the slot, and playback will begin automatically. Sub-menus may have to be pressed to access the DVD content. Read the directions of your specific DVD disc for other features.

---

How do you eject a disc?

Press to eject the disc.

---

How do you display the touch screen controls when playing a DVD?

Press anywhere on the LCD to display touch screen controls.

---

What are the DVD operation functions?

• Press to return to Main Menu screen.
• Displays elapsed time and time remaining on the DVD.
• Press to select from the following repeat options: Repeat Chapter, Repeat Title, Repeat All or Repeat Off.
• Press to return to the previous chapter on the DVD.
• Press to play or pause DVD playback.
• Press to advance to the next chapter.
• Press Random to play chapters in random order or Random Off to play disc in order.
• Press to adjust audio language settings.
• Press to adjust screen color settings.
• Press to zoom in or out on an image.
• Press to access subtitle options.
• Press to adjust audio options.
• Press to put the monitor in standby mode.
• Press to directly access the setup menu.

---

How do you pair a Bluetooth device?

Before you can use a Bluetooth device, it must be paired and connected. Make sure that Bluetooth is activated on your device before you begin the pairing process. The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is “XDVD179BT”. The Bluetooth passcode is “0000”. The unit can be in any mode of operation when pairing is performed. On certain phones, pairing may need to be done more than once.

---

What should you do if a paired Bluetooth device does not connect automatically?

Most Bluetooth devices support the auto-connect feature and will connect automatically if the device is in range when the unit is powered-on. If your device was previously paired but does not connect, enter the Bluetooth setup menu and ensure that Auto Connect is On.

---

How do you access the Bluetooth phone?

To access the phone, select Bluetooth Phone from the Main Menu or press the phone icon from any operational mode.

---

What are the Bluetooth phone operation functions?

• Press to return to the Main Menu screen.
• Displays current mode of operation.
• Use the phone keypad to dial the desired phone number. Alternately, numbers can be dialed directly from the phone.
• Press to access Bluetooth phone.
• Press to access Bluetooth music.
• Press to view a list of available devices.
• Press to connect a call.
• Press to end a call.

---

What are the Bluetooth music operation functions?

• Press to go back to the previous file or track.
• Press to pause or resume playback.
• Press to advance to the next file or track.

---

How do you use the front 3.5mm Aux Input?

Connect an optional audio source into the 3.5mm (front panel) input. Select auxiliary input from the Main Menu to listen to audio. Adjust volume on the external audio source as needed (if connected to the headphone output of the device).

---

How do you use the voice activation feature?

Press the voice activation button, and the receiver will switch into Bluetooth mode. This will activate Siri® or Google Assistant™ on your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated.

---

How do you use the navigation hot button?

Press the Navi hot button to connect your receiver to your phone through the on-screen UI. Instantly stream audio from your favorite navigation apps on a connected smartphone through your car’s receiver via Bluetooth.

---

What is required to stream navigation?

A smartphone with data is required to stream navigation.

---

How do you use the Dual iPlug P1 Smart App Remote Control?

Use the Dual iPlug P1 Smart App Remote Control on an Apple or Android smartphone to control the receiver via Bluetooth. Change the mode, station, song, volume, and settings directly from your smartphone without being in the receiver’s line-of-sight. Download the Dual iPlug P1 Smart App Remote Control from Apple App Store or Google Play Store and install it on your smartphone or tablet (QR code download link on the right).

---

How do you use the rear camera operation?

Connect an optional rear camera to the Camera Input (Black RCA connector with violet cap). Refer to the wiring diagram for details. Manual selection – Touch CAMERA icon from the Main Menu or from any operational mode (when enabled) to select camera mode. Touch the top left area on the screen to exit camera mode.

---

When does the unit automatically select camera mode?

The unit will automatically select camera mode when connected to the reverse lamp circuitry.

---

What is the SWC Input Operation?

The built-in SWC Interface is compatible with PAC steering wheel control modules. The PAC SWI-RC is recommended. A third-party adapter must be used in order for the XDVD179BT to be compatible with any steering wheel controls. The following controls are available for most vehicles:

• Volume Up (+)
• Volume Down (-)
• Mute
• Preset (+)
• Preset (-)
• Mode
• Seek/Track Up (+)
• Seek/Track Down (-)
• Band
• BT Talk
• BT End

---

What are the PAC SWI-RC installation hints?

• Set “Radio Select Switch”. Set the SWI-RC to position 7 – “Pioneer/Other/Sony”.
• To program, use the Pioneer/Sony/Other radio function mapping order for Dual units.
• When programming the SWI-RC, if a function is not supported (or not desired), then the function MUST be skipped as per the PAC SWI-RC instructions.
• The SWC function MUST be programmed in the correct order per the PAC SWI-RC radio function mapping order instructions.

---

What are the function mapping for the SWI-RC?

Function	Center Pin (Ring) Voltage	Tip Pin Voltage
Volume +	5.0v	2.07
Volume –	5.0v	2.32
Mute	5.0v	1.01
Preset +	0.0V	1.54
Preset –	0.0V	1.81
Source	5.0v	0.60
Seek + / Track +	5.0v	1.54
Seek – / Track –	5.0v	1.81
Band	5.0v	2.73
BT Talk	0.0V	0.60
BT End	0.0V	1.01

---

What are the possible causes and actions if the unit will not turn on?

Problem	Cause	Action
Unit will not turn on (no power)	Yellow wire not connected or incorrect voltage	Check connections for proper voltage (11~16VDC)
	Red wire not connected or incorrect voltage	Check connections for proper voltage (11~16VDC)
	Black wire not connected	Check connection to ground
	Fuse blown	Replace fuse(s)

---

What are the possible causes and actions if the unit has power but no sound?

Problem	Cause	Action
Unit has power (but no sound)	Speaker wires not connected	Check connections at speakers
	One or more speaker wires touching each other or touching chassis ground	Insulate all bare speaker wires from each other and chassis ground

---

What are the possible causes and actions if the unit blows fuse(s)?

Problem	Cause	Action
Unit blows fuse(s)	Yellow or red wire touching chassis ground	Check for pinched wire
	Speaker wires touching chassis ground	Check for pinched wire
	Incorrect fuse rating	Use fuses with correct rating

---

What are the possible causes and actions if the unit has audio but no video?

Problem	Cause	Action
Unit has audio (but no video)	Parking brake safety circuit not connected	Check connections at parking brake
	Parking brake not applied	Apply parking brake as described on page 26

---

What are the possible causes and actions if there is no video display when in reverse?

Problem	Cause	Action
No video display (when in reverse)	Reverse circuit not connected	Check connections at reverse lamp
	Vehicle is not in reverse	Select reverse gear

---

What are the possible causes and actions if the DVD does not start playback?

Problem	Cause	Action
DVD does not start playback	Physical defect in media	Check media for scratches
	Wrong region	Use discs labeled “Region 1” or “All” only

---

What are the possible causes and actions if the IR remote does not work?

Problem	Cause	Action
IR remote does not work	Dead battery	Replace battery

---

What are the possible causes and actions if there is excessive skipping?

Problem	Cause	Action
Excessive skipping	Unit is not mounted correctly	Check mounting sleeve
	Physical defect in media	Check media for scratches

---

What are the possible causes and actions if the “Disc Region Incorrect” appears on the display?

Problem	Cause	Action
Disc Region Incorrect appears on display	Region code error	Use discs labeled “Region 1” or “All” only