Free English DJI ZENMUSE L3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD DJI ZENMUSE L3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do to avoid burns when using the DJI ZENMUSE L3?
To avoid burns, DO NOT touch the camera case and the optical window when powering on the DJI ZENMUSE L3.
What should I do before installing the DJI ZENMUSE L3?
Before installation of the DJI ZENMUSE L3, ensure the gimbal connector is dry and free of dirt.
What should I do to prevent impact damage to the DJI ZENMUSE L3 when landing the aircraft?
Land the aircraft on flat ground to prevent impact damage to the DJI ZENMUSE L3 from uneven surfaces.
What should I do if I want to disassemble or modify the DJI ZENMUSE L3?
DO NOT disassemble or modify the DJI ZENMUSE L3 or add any other component (such as a filter or lens hood). Otherwise, it may be damaged.
What is the procedure for removing the payload when using the DJI ZENMUSE L3?
Only remove the payload after powering off the aircraft when using the DJI ZENMUSE L3.
What substances should not be used to clean or maintain the camera of the DJI ZENMUSE L3?
DO NOT use substances containing alcohol, benzene, thinners, or other flammable substances to clean or maintain the camera of the DJI ZENMUSE L3.
What precautions should be taken regarding high-energy sources when using the DJI ZENMUSE L3 LiDAR?
DO NOT expose the LiDAR of the DJI ZENMUSE L3 to strong sources of energy such as a laser beam or any other LiDAR in use. Otherwise, the LiDAR may be permanently damaged.
What should be avoided regarding vertical laser beam incidence on mirror surfaces when using the DJI ZENMUSE L3 LiDAR?
Avoid vertical laser beam incidence on mirror surfaces with high reflectivity at 1.5 µm wavelength (such as coated glass) within the LiDAR’S FOV when using the DJI ZENMUSE L3. Otherwise, the LiDAR may be permanently damaged.
How might the performance of the DJI ZENMUSE L3 be affected?
The performance of the DJI ZENMUSE L3 may decrease under high/low temperature environments, strong vibration, heavy fog, or other adverse conditions. Use with caution. Operating at a high temperature for an extended period may affect the performance or even cause permanent damage.
What should I avoid doing to the DJI ZENMUSE L3 regarding water?
DO NOT splash the DJI ZENMUSE L3 with water.
What are the specifications for the DJI ZENMUSE L3 in terms of dimensions, weight, and power?
The specifications for the DJI ZENMUSE L3 are:
Dimensions: 192×162×202 mm
Weight: 1.60 kg
Power: 64 W (typical), 100 W (max.)
What are the IP Rating, Operating Temperature, Laser Wavelength, and Laser Safety for the DJI ZENMUSE L3?
The specifications for the DJI ZENMUSE L3 are:
IP Rating: IP54
Operating Temperature: -20° to 50° C (-4° to 122° F)
Laser Wavelength: 1535 nm
Laser Safety: Class 1
What are the technical specifications for the DJI ZENMUSE L3 listed in the table?
The technical specifications for the DJI ZENMUSE L3 are listed in the table below:
| Characteristic | Value |
| Dimensions | 192×162×202 mm |
| Weight | 1.60 kg |
| Power | 64 W (typical), 100 W (max.) |
| IP Rating | IP54 |
| Operating Temperature | -20° to 50° C (-4° to 122° F) |
| Laser Wavelength | 1535 nm |
| Laser Safety | Class 1 |
CLICK HERE TO DOWNLOAD DJI ZENMUSE L3 (01) PDF DOCUMENT