DELL ULTRASHARP UP3218KA (01) PDF MANUAL

The package includes:

The Dell UltraSharp monitor

Power cable

Various data cables

Monitor stand components (base and column)

Documentation (such as the Quick Start Guide)

Cleaning cloth

1. Remove the packing foam from the top of the box.

2. Carefully lift the monitor out of the box.

3. Attach the stand column to the stand base.

4. Tighten the screw on the stand base to secure the column.

1. Align the stand with the designated slot on the back of the monitor.

2. Gently push the stand into the slot until it clicks securely into place.

3. Verify that the stand is firmly attached to the monitor.

To adjust the height, gently push or pull the monitor up or down on its stand.

To adjust the tilt, grasp the top and bottom edges of the monitor and gently tilt it forward or backward. The monitor can tilt 5 degrees forward and 21 degrees backward.

1. Locate the release button on the back of the monitor where the stand attaches.

2. Press the release button.

3. Carefully lift the monitor away from the stand.

To achieve 8K4K resolution at 60Hz, connect the monitor to your desktop PC using two DisplayPort 1.4 (DP 1.4) cables. Use both DP1 and DP2 input ports on the monitor. DisplayPort 1.2 or older versions are not compatible for this resolution and refresh rate.

To achieve 8K4K resolution at 30Hz, connect the monitor to your desktop PC using one DisplayPort 1.4 (DP 1.4) cable. DisplayPort 1.2 or older versions are not compatible for this resolution and refresh rate with a single cable.

To achieve 8K4K resolution at 30Hz, connect the monitor to your laptop using one DisplayPort 1.4 (DP 1.4) cable. DisplayPort 1.2 or older versions are not compatible for this resolution and refresh rate.

1. Plug one end of the power cable into the power input port on the back of the monitor.

2. Plug the other end of the power cable into a power outlet.