FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF DOCUMENT.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF USER GUIDE.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF USER MANUAL.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF OWNER GUIDE.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF OWNER MANUAL.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF REFERENCE GUIDE.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF REFERENCE MANUAL.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH DANFOSS AME 113 NL SU (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD DANFOSS AME 113 NL SU (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the main operational guideline for the DANFOSS AME 113 NL SU?
For the DANFOSS AME 113 NL SU, you should only operate the device on one valve.
What should I be aware of regarding the battery of the DANFOSS AME 113 NL SU during long storage periods?
The DANFOSS AME 113 NL SU may experience battery discharge during longer storage times.
How do I perform a manual stroke adjustment on the DANFOSS AME 113 NL SU?
To perform a manual stroke adjustment on the DANFOSS AME 113 NL SU, turn the screwdriver. When the stop is reached, turn the screwdriver back a quarter of a turn.
How do I assemble the DANFOSS AME 113 NL SU?
1. Mount the actuator on the valve. It can be rotated 360 degrees.
2. Connect the wiring.
3. A “click” sound will confirm it is secured.
4. The IP 54 rating is maintained.
5. Power on the device.
6. The device will begin its initialisation process, which is indicated on the function display.
What are the power supply requirements for the DANFOSS AME 113 NL SU?
The supply voltage for the DANFOSS AME 113 NL SU should be from a Safety transformer (for AC supply) according to EN 61558-2-6 (Europe) or class II (North America), or a switching power supply (for DC supply) according to EN 61558-2-16.
How do I wire the DANFOSS AME 113 NL SU?
24V AC L1/DC+: black wire
24V AC L2/DC- common ground: blue wire
Control Voltage IN 0-10V: red wire
Feedback 0-10V OUT < 1 mA: yellow wire
How long is the initialisation process for the DANFOSS AME 113 NL SU?
The initialisation process for the DANFOSS AME 113 NL SU takes approximately 15 minutes.
What do the symbols on the display of the DANFOSS AME 113 NL SU indicate?
| Symbol | Description |
|---|---|
| In | Initialisation |
| ↑ | Driving direction on |
| ↓ | Driving direction off |
| 0 – 100% | Stroke |
| 0 – 10 V A..B | Control voltage |
During initialisation and operation, the display will be an alternating display.
What do the colors of LED 1 on the DANFOSS AME 113 NL SU mean?
| Colour | Description |
|---|---|
| Green (flashes) | Initialisation |
| Red | Error |
What do the colors of LED 2 on the DANFOSS AME 113 NL SU mean?
| Colour | Description |
|---|---|
| Green (flashes) | Failsafe operation, parking position is approached |
| Green (lit) | Device ready |
| Orange (lit) | Ready for operation, battery is charging |
| Red | Error |
What should I do if the DANFOSS AME 113 NL SU indicates an error?
In case of an error on the DANFOSS AME 113 NL SU, disconnect from voltage and reconnect. Keep the voltage off for 20 minutes before reconnecting. If this occurs more than once, replace the device.
What do the back channel feedback voltages from the DANFOSS AME 113 NL SU signify?
| Voltage | Description |
|---|---|
| <0.5 V | no function/no contact |
| 1 V – 9 V | Proportional to stroke |
| 1 V | Valve closed |
| 9 V | Valve open |
| > 9.5 V | Internal error |
| 10 V | Constant value during initialisation |
How do I disassemble the DANFOSS AME 113 NL SU?
To disassemble the DANFOSS AME 113 NL SU, press the designated release button and remove the actuator from the valve.
Does the DANFOSS AME 113 NL SU have an antitheft feature?
Yes, the DANFOSS AME 113 NL SU is equipped with an antitheft device for protection against unauthorized removal.
What are the technical specifications of the DANFOSS AME 113 NL SU?
| Operating voltage | 24 V AC, -10%… +20%, 50-60 Hz 24 V DC, -20%… +20% |
| Control voltage | 0 – 10V |
| Operating capacity | 3.1 VA / 1.7 W |
| Power consumption | < 160 mA |
| Stroke | 2 mm … 8.5 mm |
| Actuating force | 100/125/150/200 N -20% … +40% |
| Actuation time | 15/30 s/mm |
| Back channel | |
| Voltage range | 0 – 10V |
| Output current | 1 mA |
| Load impedance | 10 kΩ … 1000 kΩ |
| Protection type/class | IP 54 / III |
| Ambient temperature | 0 °C … +50 °C |
| Storage temperature | -20 °C … +60 °C |
| Dimensions (W x H x D) | 45 x 65 x 90 mm |
CLICK HERE TO DOWNLOAD DANFOSS AME 113 NL SU (01) PDF DOCUMENT