Free English CREATIVE SA0220 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD CREATIVE SA0220 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the main components of the CREATIVE SA0220?
The main components of the CREATIVE SA0220 are:
1. Microphone
2. Volume +
3. Volume –
4. Multifunction Button
5. LED Indicator
6. USB-C Port (for charging)
How do I pair the CREATIVE SA0220 with a Bluetooth device?
To pair your CREATIVE SA0220 with a device, follow these steps:
1. Press and hold the Multifunction button for 5 seconds to initiate Bluetooth pairing.
2. The LED indicator will start blinking red and blue.
3. On your device, go to the Bluetooth settings and select “Creative Chat” from the list of discovered devices to connect.
4. Once connected, the LED indicator will turn solid blue.
Note: The headset will automatically attempt to connect to the last paired device upon powering on.
How do I charge the CREATIVE SA0220 and what do the battery status LEDs mean?
To charge the CREATIVE SA0220, connect it to a suitable power source using the provided USB-C cable.
The LED indicator shows the battery status as follows:
Battery Level:
Red: Charging
LED Off: Fully charged
Blinking Red: Low battery
How do I control power and Bluetooth pairing on the CREATIVE SA0220?
| Power On | Press and hold Multifunction button for 2s |
| Power Off | Press and hold Multifunction button for 2s |
| Bluetooth Pairing | When powered off, press and hold Multifunction button for 5s |
How do I control audio playback on the CREATIVE SA0220?
| Play / Pause | Press Multifunction button x 1 |
| Next Track | Press and hold Volume + button for 2s |
| Previous Track | Press and hold Volume – button for 2s |
| Volume Up | Press Volume + button |
| Volume Down | Press Volume – button |
How do I manage calls with the CREATIVE SA0220?
| Answer / Hang Up Call | Press Multifunction button x 1 |
| Reject Call | Press and hold Multifunction button for 2s |
| Mute / Unmute Mic | Press Multifunction button x 2 |
What do the various LED indicators on the CREATIVE SA0220 mean?
| Solid Blue | Connected |
| Blinking Red and Blue | Pairing |
| Blinking Blue | Ready to Connect |
| Blinking Red | Low Battery |
How do I perform a master reset on the CREATIVE SA0220?
To perform a master reset on the CREATIVE SA0220, press and hold the Multifunction and Volume + buttons simultaneously for 5 seconds. The headset will revert to its factory settings. This action is reserved for cases where users encounter problems while the headset is in use or during situations such as Bluetooth Pairing failure.
What can I do with the Creative App for the CREATIVE SA0220?
With the Creative App, you can access an ecosystem of smart features and audio customization options for your CREATIVE SA0220.
What are the technical specifications for the CREATIVE SA0220?
Headset Drivers:
30 mm Neodymium driver x 2
Frequency Response: 20–20,000 Hz
Microphone:
Type: Noise-canceling condenser x 1
Bluetooth Version:
Bluetooth 5.0
Bluetooth Profiles:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio / Video Remote Control Profile)
HFP (Hands-free Profile)
Audio Codecs:
SBC
Operating Range:
Up to 10m / 33 ft
Operating Frequency:
2402–2480 MHz
Battery:
Rechargeable Lithium-ion Polymer Battery 180 mAh
Audio Playback:
Up to 22 hours per charge
Charging Interface:
USB-C (Charging)
Operating Temperature:
0–45°C
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD CREATIVE SA0220 (01) PDF DOCUMENT