CHAUDHARY GROUP CGIC20C02 (01) PDF Document

You should follow these safety precautions for the CHAUDHARY GROUP CGIC20C02:

1. Only use this appliance for its intended domestic purpose and not in a commercial environment.

2. Verify the input voltage matches the rating label on the product.

3. Always switch off and unplug the appliance when not in use or before cleaning.

4. Never leave the appliance unattended while connected to the mains supply.

5. Switch the product off before connecting it to the power supply.

6. Do not touch or attempt to retrieve an electrical product that has fallen into water. Unplug it first and have it tested by a qualified person before reuse.

7. Supervise children closely when they are near the appliance.

8. Keep the power cable away from heat sources, water, and sharp objects like knives.

9. Ensure the cable does not drape over the edge of a work surface where it could be pulled.

10. Never carry the unit by its power cable.

11. Do not use the unit if the cable or plug is damaged.

12. Keep ventilation slots clear and observe safe working distances from walls.

13. Always operate with dry hands.

14. Use indoors only.

15. If the product stops working unexpectedly, switch it off and unplug it immediately; seek professional advice before reusing.

To safely and effectively operate your CHAUDHARY GROUP CGIC20C02, please follow these guidelines:

1. Do not plug the unit into a socket where several other appliances are plugged in.

2. Do not use if the power plug does not fit the socket securely or if the cord is damaged.

3. Do not modify parts or attempt repairs; the power cord must be replaced by qualified technicians.

4. Do not use near open flames or wet places.

5. Keep out of children’s reach.

6. Always place on a stable, even surface.

7. Do not heat an empty pot or overheat it.

8. Do not place metallic objects such as knives, forks, spoons, lids, cans, or aluminum foils on the top surface.

9. Maintain a minimum distance of 5 to 10 cm from walls or other items to allow sufficient space around the cooking area.

10. Never use on low heat resistant materials like carpet or vinyl.

11. Do not place paper between the pot and the unit as it may get burnt.

12. Do not block the air intake or exhaust vent.

13. Be aware that the surface will remain hot after use.

14. Keep away from items sensitive to magnetic fields like radios, televisions, credit cards, and cassette tapes.

15. Do not use on metallic surfaces.

16. Do not disconnect the power cord immediately after cooking; wait at least 15 seconds for the unit to cool down.

For the Rice function on the CHAUDHARY GROUP CGIC20C02: The default is 1200W. You can adjust the power between 100W and 2000W. If the power is set lower than 800W, it will operate periodically; if set over 1000W, it will operate continuously.

For the Fry function on the CHAUDHARY GROUP CGIC20C02: The default temperature is 240°C. You can adjust the temperature between 60°C and 270°C. If the temperature is set lower than 90°C, it will operate periodically; if set over 120°C, it will operate continuously.

For the Hot pot function on the CHAUDHARY GROUP CGIC20C02: The default is 1200W. You can adjust the power between 100W and 2000W. If the power is set lower than 800W, it will operate periodically; if set over 1000W, it will operate continuously.

You can use steel, cast iron, enameled iron, stainless steel, or flat-bottomed pans and pots with a diameter from 12 to 26 cm on the CHAUDHARY GROUP CGIC20C02.

Do not use heat-resistant glass, ceramic containers, copper, or aluminum pans/pots, nor any cookware with rounded bottoms measuring less than 12 cm.

The following table lists the error codes for the CHAUDHARY GROUP CGIC20C02 and how to resolve them:

1. Clean the CHAUDHARY GROUP CGIC20C02 after each use, ensuring you disconnect the plug and wait for the unit to cool down first.

2. If the surface plate is dirty, clean it with a wet cloth and wash it directly.

3. Keep the unit clean and ensure no insects enter the internal components to maintain performance.

4. Clean the ventilation area using a toothbrush or cotton.

5. If there is anything wrong with the unit, it must be repaired by professionals only.