CHAUDHARY GROUP CGIF20A05 (01) PDF Document

When the power connection is ON, the electric current will produce a magnetic field in the induction coil, which is embedded in the machine. As soon as the magnetic force lines in the magnetic field touch the alloy steel pot / boiler, it will produce the heating effect, which would lead to the heating of the food in the pot.

Step 1. Put the pot with food on the center of the plate.

Step 2. Connect the Plug into the 220 V, 16 Amp power socket. The machine is now ready for use.

Step 3. Press the on/off button, and then choose the function button.

Use iron pot for better optimization of wattage consumption.

Do not turn off the power supply before device cools down completely. Turning off the power supply may cause damage.

The induction cooker automatic function include: soup, porridge, milk, tea, keep warm, save fire etc. functions, all controlled by CPU of the induction cooker, depend on the vegetables, adjust the fire, the cook process finished automatically.

Step 1. Automatic function must work with pan, if the bottom is thin, automatic Functions cannot be used.

Step 2. When the automatic function are using, fire and timer cannot adjust.

Step 3. The automatic function is better used for cooking more than less.

Induction cooker adjustable functions include fry vegetable, hot pot, barbecue, stewing, stir-fry, timer, preset etc. functions. Users can depend on the requirements of cook then adjust the fire and timer, satisfied personalizes cooking requirements.

Step 1. It is better to use induction cooker special pot.

Step 2. Pay attention to cooking process, lead appear accident.

Step 3. After choose cooking project, timer and preset can be selected.

Step 4. If need inquires of the power and voltage. Press the key can show the currentvoltage or current of electricity.

Step 1. Low power and high power protection when power low than 88V or high over 280V, the machine never heating.

Step 2. Auto-inspection function for small object when some small iron products (diameter is less than 8cm), the machine will not output power and heating.

Step 3. No pot or the material is not suitable protect If the pot material is not suitable or the pot’s bottom size is small (less than 8cm), the machine will not output power and heating with a BI voice or please put pot warning When the temperature of the plate surface is too high, the machine will stop outputting power automatically with a long Bi Bi voice or fault alarm, until the temperature get cool.

Step 1. Please do not use the electrical Outlet of 16A alone, do not use General sockets, and do not use otherappliances at the same time.

Step 2. When using, please make induction cooker in smooth place and keep the distance from the wall over 10cm.

Step 3. Do not use induction cooker near gas cooker and kerosene cooker.

Step 1. Do not clean induction Cooker with water directly prevent any risks.

Step 2. Do not insert wire etc.do not jam inlet and outlet, prevent any risks.

Step 3. Do not pull iron on the plate protect high temperature because any risks.

Step 4. Seal food, please heating after open lid.

Step 5. Do not use induction cooker on iron place, include any places where with over 10cm metal mat.

Step 6. Do not put the empty pot on induction cooker, prevent affect the product’s performance, even any risks.

Step 7. Often clean induction Cooker, avoid the ingress Fan, affect the normal work.

Step 8. When using, please do not touch the plate with your Hand, avoid scald.

Step 9. If the power line is damage, must use professional line to replace.

Step 10. Do not let children use Induction cooker alone, Avoid scald.

Step 11. User of cardiac pacemaker please confirm with professional doctors, if without influence Then can use induction cooker.

Friendly cookware material is Iron or stainless steel. The shape requirement is Bottom diameter about 12-20cm saucepan or bottom size is 12-20cm square pot.

Non-friendly cookware material is Non-iron metal, ceramic, glass and the bottom is made of cooper or aluminum pot. The shape requirement is Bottom uneven, diameter less than 12cm.

The ceramic cooker uses the principle of infrared heating technology. The nickel Chromium wire on the furnace plate generates heat, which will emit infrared when generating heat. This technology accelerates the heating speed of the ceramic furnace and there are no factors harmful to health, safety and health in the process of heat generation.

Friendly cookware material is non-iron metal, ceramic, glass, iron or stainless steel. The shape requirement is bottom diameter about 18-26cm saucepan or bottom size is 12-20cm square pot.

Non-friendly cookware shape requirement is bottom uneven, diameter less than.

Step 1. Before cleaning the cooker, make sure that the plug is unplugged and the power is off.

Step 2. To remove dirt, select litmus less detergent.

Step 3. If the dirt is little, just clean it with a clean wet cloth.

Step 4. Do not clean with water directly or put it in water. If water gets inside this may cause amalfunction.

When do not use the machine, please unplug power plug.

Please keep the machine clean, lest cockroaches and small insect enter, cause ashort circuit.

When the plate and bottom are dirty, continue to use will burn and clean very difficultly.

When the power cord damage, please consult specialized after-sale replacement ofthe same model’s power cord.

The user should check the machine depending on the following matters, as summarized in the table below:

When using the full indicator mode, a power light flicking and do not heating, check as above.

The user should check the fault phenomena and corresponding checks as summarized in the table below for the CHAUDHARY GROUP CGIF20A05 infrared cooker:

Step 1. These safety precautions must always be followed when using household electrical appliances to reduce the risk of electric shock, personal injury, or fire. It is important to keep these instructions in mind before reading and attempting to use the appliance.

Step 2. This is a household electronics appliance, which should only be used for its intended purpose; this appliance should not be used in a commercial environment according to these instructions.

Step 3. Always switch off the electrical appliance when not in use and remove the plug (cord) from the socket before cleaning the appliance or changing accessories or utensils.

Step 4. Always be present when most household electrical appliances are in use. Pay attention to this appliance when the wire is connected to the main power supply (socket). Do not leave this appliance unattended while in use.

Step 5. Always ensure that the appliance is switched off (off) before connecting the wire or plug to the main supply (socket).

Step 6. Never use a household electrical appliance that has fallen into water. If you do so, you may get an electric shock. Turn off the power at the socket and pull out the plug before attempting to remove it from the water. After removing it from the water, do not attempt to reconnect the product until it is completely dry and tested and authorized by a qualified person.

Step 7. Household electrical appliances are not designed for use by children. If any child is using the household electrical appliance, a responsible adult must closely supervise to ensure that all instructions and safety precautions are followed.

Step 8. All main cables/wires should not come into contact with hot sources, water, or any other liquid. Ensure that sharp objects such as knives are not used near the main cable/wire when the electrical appliances are in use.

Step 9. Never place the electrical appliances’ cable/wire where a child can pull it. Always check the condition of the main cable/wire when the electrical appliances are in use.

Step 10. Do not carry the electrical appliance on the cable/wire support as this may damage the power transmission to another use.

Step 11. Never operate an appliance with a damaged cable/wire or plug.

Step 12. Do not switch off the main cable switch immediately after using this electrical appliance. Only switch off the switch on the electrical appliance. Switch off the main cable switch after some time when the cooling fan in the appliance has stopped, and only then switch off the main cable switch after the appliance has cooled down.

Note: Use an iron vessel for good optimization of wattage consumption.

Step 1. Remove from the box.

Step 2. Clean with a dry cloth.

Step 3. Place the cooking vessel correctly on top of the appliance.

Step 4. Connect the appliance’s wire to the power socket and press the power button.

In this option, the user must select the required temperature, time, and power wattage themselves.

Maintain a safe working distance from the wall or other objects around the cooking area, keep a distance of a minimum of 6 to 10 centimeters from the wall or objects.

If the electrical appliance unexpectedly stops working, immediately switch off the appliance and remove the plug from the socket. Seek advice from a professional repair person before attempting to use the appliance again.

Step 1. Do not plug the socket where many other appliances are already plugged in.

Step 2. Do not use if the plug cord/wire is damaged or the power plug does not fit.

Step 3. Do not modify the appliance parts and do not repair this appliance yourself.

Step 4. Do not use this appliance near open flames or wet areas.

Step 5. Keep out of reach of children.

Step 6. Place on a stable, flat surface.

Step 7. Do not heat an empty vessel or overheat.

Step 8. Do not place metal objects such as knives, forks, spoons, lids, cans, and aluminum foil on the top surface or under the appliance.

Step 9. Do not use the appliance on low heat-resistant material (carpet, vinyl).

Step 10. Do not place paper between the vessel or pan and the appliance. The paper may burn.

Caution: The surface will remain hot for some time after use, do not touch it with your hand for some time.

Step 11. The unit may affect objects that have magnetic fields or are attracted, such as radios, televisions, automatic banking cards.

Step 12. Do not use the appliance on a metal surface.

Step 13. Immediately after cooking, do not unplug the power cord for at least 15 seconds, and do not switch off the main switch. The fan inside the appliance needs to run to cool the appliance, and switch off after the appliance has cooled down.

The appliance stops working and displays a relevant code on the display screen if it experiences inappropriate operation from you or other means. This is only for the safety of the electrical appliance and to guide you, as summarized in the table below:

When the electrical appliance experiences inappropriate operation from you or other means, it stops working and displays a relevant code on the display screen. This is only for the safety of the electrical appliance and to guide you, as summarized in the table below:

Clean after every use. Unplug from the socket and wait for the appliance to cool down. If the surface plate is dirty, clean it with a slightly damp cloth. Keep the appliance clean, prevent insects from entering the appliance, and clean the small holes with a brush or cotton swab. If the appliance is damaged or not working, it should only be repaired by professional technicians.

Step 1. Our induction cooker has a unique feature that shows the voltage and how much electricity is used for each cooking during the working time.

Step 2. It works with high and controlled heating from start to finish with 95% efficiency without any electricity waste.

Step 3. The entire appliance is free of 100% electric shock due to microcomputer inspection and high-size structure.

Step 4. The induction cooker does not produce any flame, heat, or smoke, keeping the kitchen clean. Due to these qualities of the cooker, cooking can be done outside the kitchen.

Step 5. The induction cookers have a beautiful design that will decorate the kitchen.

Step 6. The induction cooker is very light in weight, so it can be carried anywhere.