CELLY BHNECK (01) PDF Document

The technical specifications for the CELLY BHNECK earphones are as follows:

Noise cancellation: AEC/NR

Charging time: 4 hours

Microphone Sensitivity: -42 dB

Bluetooth® version: 4.2

Speaker Frequency Response: 500Hz – 4,000Hz

Bluetooth® range: 10m

Battery Type: Li-ion polymer 135 mAh, 0.49 Wh

Working time: 12 hours

Standby time: 10 days

Impedance: 32 Ω

Operating temperature: 0° – 40° C

Software: BHNECK, Version MC381

Frequency response: 2.402 ~ 2.480 GHz

Transmission power: 5 mW (MAX) – 3dB

For first-time use, it is recommended to charge the battery to full capacity. To charge the CELLY BHNECK, plug the charging cable into the USB charger port. A red light indicates that the earphones are charging. The light will turn blue when the charge is full.

1. Place the CELLY BHNECK headset and the pairing device within 1 meter of each other.

2. Long press the multifunction button for 3 seconds until the red and blue light flashes alternately. This indicates the headset is in pairing mode.

3. Activate your pairing device’s Bluetooth feature.

4. Search for “BHNECK” in the list of available devices and select it to connect.

5. If a password is requested, key in “0000”.

Yes. Once the CELLY BHNECK headset and a pairing device have been paired before, they will be automatically reconnected when the pairing device’s Bluetooth is on and they are within range of each other.

Answer a call: Press the Multifunction button to take a call.

Reject a call: Press and hold the Multifunction button to reject a call.

Redialing: Double click the Multifunction button to redial the last phone number in your recent calls.

The Multifunction button also serves as the Power switch, Pairing button, Play/Pause button, and Hang up phone call button.

The “+” and “-” buttons control music playback and volume:

Next song: Long press the “+” button.

Volume increase: Quick and short press the “+” button.

Previous song: Long press the “-” button.

Volume decrease: Quick and short press the “-” button.

The CELLY BHNECK earphones will auto power off in the following situations:

1. If you are connected to a phone and you disconnect the earphone, it will auto power off in 5 minutes.

2. If you do not connect to a phone while the blue and red lights are flashing (pairing mode), the earphone will auto power off in 5 minutes.

1. Do not use abrasive cleaning solvents to clean the BHNECK.

2. Do not touch the BHNECK with any sharp object as this will cause scratching and damage.

3. Please keep the BHNECK away from high-temperature, dust, and humidity.

Please observe the following warnings when using your CELLY BHNECK:

• When using your neckband while driving, follow local regulations in the region you are in.

• Never disassemble or modify your neckband for any reason. Doing this may cause the neckband to malfunction or become combustible.

• Keep your device and all accessories out of the reach of kids or animals. Small parts may cause choking or serious injury if swallowed.

• Avoid exposing your device to very cold or very hot temperatures (below 0 °C or above 40 °C). Extreme temperatures can cause the deformation of the device and reduce the charging capacity and life of your device.

• Do not get your device wet – liquids can cause serious damage. Do not handle your device with wet hands. Water damage to your device can void your manufacturer’s warranty.

• Avoid using your device’s light close to the eyes of children or animals.

• Do not use the device during a thunderstorm. Thunderstorms can cause the device to malfunction and increase the risk of electric shock.

• Do not store or expose the product to any source of heat, direct sunlight, radiators, stoves or other heat sources such as the dashboard of your car in the summer.