CAMBRO MDS1520T8R (01) PDF DOCUMENT

1. Clean with mild soap (dish detergent). Power washing is permitted.

2. Hand wash using a soft nylon scrub to clean all interior and exterior surfaces.

3. Rinse with hot water.

4. For tougher stains, mild abrasives such as baking powder and white vinegar may be used.

5. After cleaning, rinse thoroughly with hot water and dry thoroughly.

WARNING: Do not use detergents or cleaners containing ammonia, bleach or harsh chemicals.

WARNING: Do not use steel wool or abrasive scrub pads or brushes.

WARNING: Do not tip the cart forward and lean on its open doors to drain or air dry.

Effective solutions for removing scents and stains from your CAMBRO MDS1520T8R include:

• Use a standard destainer or

• An odor removing soap or

• Sanitizer or

• A diluted solution of 2-3 tablespoons of baking soda per 4 liters of hot water or

• 1 part lemon juice to 4 parts hot water or

• 1 part white vinegar to 4 parts hot water.

After using one of these solutions, rinse thoroughly with hot water and dry thoroughly.

Caster maintenance on your CAMBRO MDS1520T8R should be performed after every cleaning.

1. Grease the swivel raceway of the caster using a lubricant such as Lubriplate #930-AA, Keystone #84EPXLT multi-purpose grease or equivalent. Apply grease using a grease gun with a needle nose adapter or a tube-type applicator such as Sta-lube Moly-graph Assembly Lube.

2. Use a light oil such as WD-40 on the hub.

3. Check the caster for damage and test its spin and swivel rotation before returning to service.