CAMBRO MDS1418S20 (01) PDF DOCUMENT

1. Clean with mild soap (dish detergent). Power washing is permitted.

2. Hand wash using a soft nylon scrub to clean all interior and exterior surfaces.

3. Rinse with hot water.

4. For tougher stains, mild abrasives such as baking powder and white vinegar may be used.

5. After cleaning rinse thoroughly with hot water and dry thoroughly.

WARNING: Do not use detergents or cleaners containing ammonia, bleach or harsh chemicals.

WARNING: Do not use steel wool or abrasive scrub pads or brushes.

WARNING: Do not tip cart forward and lean on its open doors to drain or air dry.

Use one of the following effective solutions for removing scents and stains:

• Use a standard destainer or

• An odor removing soap or

• Sanitizer or

• A diluted solution of 2-3 tablespoons of baking soda per 4 liters of hot water or

• 1 part lemon juice to 4 parts hot water or

• 1 part white vinegar to 4 parts hot water.

After cleaning, rinse thoroughly with hot water and dry thoroughly.

Caster maintenance should be performed after every cleaning.

1. Grease swivel raceway of caster using a lubricant such as Lubriplate #930-AA, Keystone #84EPXLT multi-purpose grease or equivalent. Apply grease using a grease gun with a needle nose adapter or a tube-type applicator such as Sta-lube Moly-graph Assembly Lube. These can be obtained at most auto parts stores.

2. Use a light oil such as WD-40 on the hub.

3. Check caster for damage and test caster spin and swivel rotation before returning to service.

The cart model number can be found on the end of the cart above the bumper. The model number of the Cambro cart is required to determine the correct replacement part.