FREE ENGLISH BUSH BDBL60ELB (01) PDF USER GUIDE
FREE ENGLISH BUSH BDBL60ELB (01) PDF USER MANUAL
FREE ENGLISH BUSH BDBL60ELB (01) PDF OWNER GUIDE
FREE ENGLISH BUSH BDBL60ELB (01) PDF OWNER MANUAL
FREE ENGLISH BUSH BDBL60ELB (01) PDF REFERENCE GUIDE
FREE ENGLISH BUSH BDBL60ELB (01) PDF INSTRUCTION GUIDE
FREE ENGLISH BUSH BDBL60ELB (01) PDF REFERENCE MANUAL
FREE ENGLISH BUSH BDBL60ELB (01) PDF INSTRUCTION MANUAL
FREE ENGLISH BUSH BDBL60ELB (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BUSH BDBL60ELB (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
BUSH BDBL60ELB (01) PDF SUMMARY:
If you require any technical guidance or find that your product is not operating as intended, where can you find a solution?
A simple solution can often be found in the Troubleshooting section of the instruction manual.
Where can you find help and guidance for your cooker?
Help and guidance can be found online at http://www.argos-support.co.uk or by calling one of their experts on 0345 604 0105.
What should you do before installing or operating the appliance?
Carefully read all instructions before using the appliance and keep them in a convenient place for reference when necessary.
What is important to note about the manual?
This manual has been prepared for more than one model, therefore the appliance may not have some of the features described within. For this reason, it is important to pay particular attention to any figures whilst reading the operating manual.
Who can use this appliance?
This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.
What precautions should be taken regarding the appliance’s heat?
The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Keep children less than 8 years of age away unless they are continually supervised.
What are the warnings regarding unattended cooking with fat or oil?
Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish such a fire with water, but switch off the appliance and cover the flame with a lid or a fire blanket. WARNING: Danger of fire: Do not store items on the cooking surfaces.
What should you do if the surface is cracked?
If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
What precautions should be taken for models with a hob lid?
For models which incorporate a hob lid, clean any spillages off the lid before use and allow the cooker to cool before closing the lid.
Can you operate the appliance with an external timer or separate remote-control system?
Do not operate the appliance with an external timer or separate remote-control system.
What is important to note about the stabilizing brackets?
To prevent the appliance tipping, the stabilising brackets must be installed. (For detailed information refer to the anti-tilting kit set guide.)
What precautions should be taken regarding the heating elements inside the oven?
During use the appliance will get hot. Care should be taken to avoid touching heating elements inside the oven.
What should you be aware of regarding the handles?
Handles may become hot after a short period of time during use.
What type of cleaners should not be used on oven surfaces?
Do not use harsh abrasive cleaners or scourers to clean oven surfaces. They can scratch the surfaces which may result in shattering of the door glass or damage to surfaces.
Can you use steam cleaners to clean the appliance?
Do not use steam cleaners to clean the appliance.
What safety measures should be taken before replacing the lamp?
To avoid the possibility of electric shocks, make sure that the appliance is switched off before replacing the lamp.
What precautions should be taken regarding accessible parts when cooking or grilling?
CAUTION: Accessible parts may be hot when cooking or grilling. Keep young children away from the appliance when it is in use.
How is the appliance produced in terms of safety standards?
The appliance is produced in accordance with all applicable local and international standards and regulations.
Who should carry out maintenance and repair work?
Maintenance and repair work should only be carried out by authorised service technicians. Installation and repair work that is carried out by unauthorised technicians may be dangerous. Do not alter or modify the specifications of the appliance in any way. Inappropriate hob guards can cause accidents.
What should you check before connecting the appliance?
Before connecting the appliance, make sure that the local distribution conditions (nature of the gas and gas pressure or electricity voltage and frequency) and the specifications of the appliance are compatible. The specifications for this appliance are stated on the label.
What is the intended use of this appliance?
CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic household use only. It should not be used for any other purpose or in any other application, such as for non-domestic use, in a commercial environment or for heating a room.
Can you use the oven door handles to lift or move the appliance?
Do not use the oven door handles to lift or move the appliance.
What precautions should be taken while cleaning the glass?
All possible measures have been taken to ensure your safety. Since the glass may break, care should be taken while cleaning to avoid scratching. Avoid hitting or knocking the glass with accessories.
What precautions should be taken regarding the supply cord during installation?
Make sure that the supply cord is not trapped or damaged during installation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent a hazard.
What safety precautions should be taken regarding children and the oven door?
Do not let children climb on the oven door or sit on it while it is open.
When should you operate the appliance?
Do not operate the appliance before it is fully installed.
Who should install the appliance?
The appliance must be installed by an authorised technician. The manufacturer is not responsible for any damage that might be caused by incorrect placement and installation by unauthorised people.
What should you do when unpacking the appliance?
When the appliance is unpacked, make sure that it has not been damaged during transportation. In the case of a defect, do not use the appliance and contact a qualified service agent immediately. The materials used for packaging (nylon, staplers, styrofoam, etc.) may be harmful to children and they should be collected and removed immediately.
How should you protect your appliance from the atmosphere?
Protect your appliance from the atmosphere. Do not expose it to sun, rain, snow, dust or excessive humidity.
What temperature must materials around the appliance be able to withstand?
Materials around the appliance (i.e. cabinets) must be able to withstand a minimum temperature of 100°C.
What might you notice when you first use your oven?
When you first use your oven you may notice a slight smell. This is perfectly normal and is caused by the insulation materials on the heater elements.
What is suggested before using the oven for the first time?
Before using your oven for the first time, it is suggested that you leave it empty and set it at maximum temperature for 45 minutes. Make sure that the environment in which the product is installed is well ventilated.
What precautions should be taken when opening the oven door?
Take care when opening the oven door during or after cooking. The hot steam from the oven may cause burns.
Can you put flammable or combustible materials in or near the appliance when it is operating?
Do not put flammable or combustible materials in or near the appliance when it is operating.
What should you always use to remove and replace food in the oven?
Always use oven gloves to remove and replace food in the oven.
What are the safety measures for cooking with solid or liquid oils?
Do not leave the cooker unattended when cooking with solid or liquid oils. They may catch fire under extreme heating conditions. Never pour water on to flames that are caused by oil, instead switch the cooker off and cover the pan with its lid or a fire blanket.
How should you position pans on the cooking zone?
Always position pans over the centre of the cooking zone, and turn the handles to a safe position so they cannot be knocked.
What should you do if the product will not be used for a long period of time?
If the product will not be used for a long period of time, turn the main control switch off. Turn the gas valve off when gas appliances are not in use.
What should you do with the appliance control knobs when the appliance is not in use?
Make sure the appliance control knobs are always in the “0” (stop) position when the appliance is not in use.
What should you be aware of when pulling out the trays?
The trays incline when pulled out. Take care not to spill or drop hot food when removing it from the oven.
Can you place anything on the oven door when it is open?
Do not place anything on the oven door when it is open. This could unbalance the oven or damage the door.
What items should not be placed in the drawer?
Do not place heavy or flammable items (e.g. nylon, plastic bags, paper, cloth, etc.) into the drawer. This includes cookware with plastic accessories (e.g. handles).
What is important to note about the inside surface of the storage compartment?
CAUTION: The inside surface of the storage compartment may get hot when the appliance is in use. Avoid touching the inside surface.
Can you hang towels, dishcloths or clothes from the appliance or its handles?
Do not hang towels, dishcloths or clothes from the appliance or its handles.
What should you do before carrying out any cleaning or maintenance operations?
Make sure that your appliance is turned off at the mains before carrying out any cleaning or maintenance operations.
Can you remove the control knobs to clean the control panel?
Do not remove the control knobs to clean the control panel.
What is recommended to maintain the efficiency and safety of your appliance?
To maintain the efficiency and safety of the appliance, it is recommended that you always use original spare parts and to call our authorised service agents when needed.
What do the manufacturers declare about their products?
The manufacturers declare that their products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced.
What is the intended use of this appliance?
This appliance has been designed to be used only for home cooking. Any other use (such as heating a room) is improper and dangerous.
What is important to note about the operating instructions?
The operating instructions apply to several models. You may notice differences between these instructions and your model.
How can I get technical guidance or if my product is not operating as intended?
A simple solution can often be found in the Troubleshooting section of the instructions.
Where can I find further assistance if I need it?
For full details, refer to the product support section at the end of the instructions or online at http://www.argos-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105.
What should I do before installation?
Ensure that the local distribution conditions (electricity voltage and frequency and/ or nature of the gas and gas pressure) and the adjustments of the appliance are compatible. The adjustment conditions for this appliance are stated on the label.
What are the laws, ordinances, directives, and standards in force in the country of use that need to be followed?
Safety regulations, proper recycling in accordance with the regulations, etc…
What should I do after removing the packaging material from the appliance and its accessories?
Ensure that the appliance is not damaged. If you suspect any damage, do not use it and contact an authorized service person or qualified technician immediately.
Are there any precautions I need to take regarding flammable or combustible materials?
Make sure that there are no flammable or combustible materials in the close vicinity, such as curtains, oil, cloth, etc., which may catch fire.
What kind of materials should the worktop and furniture surrounding the appliance be made of?
Materials resistant to temperatures above 100°C.
Can the appliance be installed directly above a dishwasher, fridge, freezer, washing machine, or clothes dryer?
No, the appliance should not be installed directly above any of those appliances.
Can the appliance be placed close to other furniture?
Yes, on the condition that, in the area where the appliance is set up, the furniture’s height does not exceed the height of the cooktop.
What is the required distance between the kitchen furniture and the appliance if the kitchen furniture is higher than the cooktop?
The kitchen furniture must be at least 10 cm away from the sides of the appliance for air circulation.
How much blank space should there be around the appliance for air circulation?
There should be a minimum 2 cm blank space around the appliance.
What is the safety distance between the cooktop and any cupboard/cooker hood if a cooker hood or cupboard is to be installed above the appliance?
The safety distance should be as shown below:
- A (mm) 420
- B (mm) Cooker Hood/Cupboard 650/700
- C (mm) 20
- D (mm) Product Width
- E (mm) 50
Who should carry out the electrical connection of this appliance?
An authorized service person or qualified electrician, according to the instructions in this guide and in compliance with the current local regulations.
Does the appliance need to be earthed?
Yes, the appliance must be earthed.
What checks need to be done before connecting the appliance to the power supply?
- The voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage.
- The mains electric wiring should be capable of handling the appliance’s power rating (also indicated on the identification plate).
What type of cables should be used during installation?
Isolated cables.
Why is an incorrect connection harmful?
It could damage your appliance.
Who should replace the mains cable if it is damaged and needs to be replaced?
Qualified personnel.
Can I use adaptors, multiple sockets and/or extension leads?
No, do not use adaptors, multiple sockets and/or extension leads.
Where should the supply cord be kept?
Away from hot parts of the appliance.
Can the supply cord be bent or compressed?
No, the supply cord must not be bent or compressed.
Why can’t the supply cord be bent or compressed?
Otherwise, the cord may be damaged, causing a short circuit.
What type of switch must be used if the appliance is not connected to the mains with a plug?
A multi-pole isolator switch (with at least 3 mm contact spacing).
Why must a multi-pole isolator switch be used if the appliance is not connected to the mains with a plug?
In order to meet the safety regulations.
What is the power supply the appliance is designed for?
220-240 V~.
Who should I contact if my power supply is different from 220-240 V~?
The authorized service personnel or qualified electrician.
How long does the power cable (H05VV-F) need to be?
Long enough to be connected to the appliance.
Where should the fused switch be located?
Easily accessible once the appliance has been installed.
How should the connections be tightened?
Ensure all connections are adequately tightened.
What are the steps for securing the supply cable?
Fix the supply cable in the cable clamp and then close the cover.
Where is the terminal box connection located?
On the terminal box.
Which wire should be connected to the terminal marked “PE”?
Green/Yellow (Earth) wire.
Which wire should be connected to the terminal marked “L”?
Brown (Live) wire.
Which wire should be connected to the terminal marked “N”?
Blue (Neutral) wire.
What type of cable should be used for the connection?
A ‘Twin and Earth 6242Y’ type cable.
How to attach the anti-tilting bracket?
Loosely attach the anti-tilting bracket (1) to the wall using the screw (2) and dowel (3), following the measurements shown in the figure and table below. Adjust the height of the anti-tilting bracket so that it lines up with the slot on the cooker and tighten the screw. Push the appliance towards the wall making sure that the anti-tilting bracket is inserted into the slot on the rear of the appliance.
What are the product dimensions and corresponding measurements for the anti-tilting bracket?
| Product Dimensions (Width X Depth X Height) (Cm) | A (mm) | B (mm) |
|---|---|---|
| 60x60x90 (Double Oven) | 297.5 | 52 |
| 50x60x90 (Double Oven) | 247.5 | 52 |
| 90x60x85 | 430 | 107 |
| 60x60x90 | 309.5 | 112 |
| 60x60x85 | 309.5 | 64 |
| 50x60x90 | 247.5 | 112 |
| 50x60x85 | 247.5 | 64 |
| 50x50x90 | 247.5 | 112 |
| 50x50x85 | 247.5 | 64 |
How do I adjust the feet of the appliance?
Your product stands on four adjustable feet. For safe operation, it is important that your appliance is correctly balanced. Make sure the appliance is level prior to cooking. To increase the height of the appliance, turn the feet anti-clockwise. To decrease the height of the appliance, turn the feet clockwise.
How much can the height of the appliance be raised by adjusting the feet?
It is possible to raise the height of the appliance up to 30 mm by adjusting the feet.
How many people are recommended to lift the appliance and why?
The appliance is heavy and we recommend that a minimum of 2 people lift it.
Can I drag the appliance?
No, never drag the appliance.
How do I prepare my double oven?
Before using your oven for the first time, it is recommended to heat your oven empty for approximately 30 minutes. This helps to remove any manufacturing residues. IMPORTANT: Ensure the room is well ventilated [PDF].
What temperature should I heat the oven to when preparing my double oven?
Set the oven to 180 °C (350°F) for approximately 30 minutes [PDF].
What is the purpose of the shelves?
The shelves can be placed at various levels in the oven [PDF].
How do I adjust the shelf positions?
They can be inserted into the side racks at 5 different heights. To remove the shelves, pull them forward until they stop. Slightly lift and continue to pull forward until they are completely out of the oven [PDF].
What are the main oven functions?
- Static: Static heating provides traditional cooking with heat from the bottom element only.
- Fan: The fan assisted cooking function ensures even heat distribution throughout the oven cavity. It is ideal for multi-level cooking and it allows for a lower cooking temperature and reduced cooking time.
- Grill: The top heating element provides a direct source of heat for grilling food. The food to be cooked is placed under the heating element. The grill function is ideal for cooking thin cuts of meat, sausages and toasting.
- Defrost: The fan circulates air at room temperature around the frozen food, accelerating the defrosting process. [PDF].
How do I use the main oven?
- Turn the Main Oven Control knob to select the desired function.
- Turn the Thermostat Control knob to select the desired temperature. [PDF].
What happens when the main oven reaches the set temperature?
The thermostat will regulate the temperature inside the cavity, switching the heating elements on or off as needed. An indicator light on the control panel will illuminate when the heating elements are in use [PDF].
What happens when the main oven cooking is finished?
Turn the Main Oven Control knob to the “Off” position and the Thermostat Control knob to “0” [PDF].
What are the top oven functions?
- Static: Static heating provides traditional cooking with heat from the bottom element only.
- Grill: The top heating element provides a direct source of heat for grilling food. The food to be cooked is placed under the heating element. The grill function is ideal for cooking thin cuts of meat, sausages and toasting.
- Fan Grill: The fan grill function utilises both the top element and the fan. The food to be cooked is placed under the grill element. This function is suitable for grilling larger quantities of food that require even browning. [PDF].
How do I use the top oven?
- Turn the Top Oven Control knob to select the desired function.
- Turn the Thermostat Control knob to select the desired temperature (the Thermostat control knob is shared between the main oven and top oven) [PDF].
What happens when the top oven reaches the set temperature?
The thermostat will regulate the temperature inside the cavity, switching the heating elements on or off as needed. An indicator light on the control panel will illuminate when the heating elements are in use [PDF].
What happens when the top oven cooking is finished?
Turn the Top Oven Control knob to the “Off” position and the Thermostat Control knob to “0” [PDF].
How do I use the timer?
- Turn the control knob clockwise to set the desired time.
- The timer will count down the set time. When it reaches zero, the timer will sound an audible signal.
- To stop the audible signal, turn the control knob to the “Off” position [PDF].
How do I clean the oven?
- Cleaning the Outer Surfaces: Use a soft damp cloth with a mild detergent to clean the outer surfaces of the oven. Dry thoroughly after cleaning.
- Cleaning the Oven Door: Clean the glass using a soft damp cloth with a mild detergent. Do not use abrasive or corrosive cleaning agents. Do not spray cleaning products directly onto the control panel.
- Cleaning the Oven Interior: It is recommended that you clean the oven regularly to prevent a build-up of baked-on food and grease. Allow the oven to cool before cleaning. Remove the shelves and side racks and clean them with warm, soapy water. Clean the oven cavity with a proprietary oven cleaner following the manufacturer’s instructions. Rinse and dry thoroughly. Ensure the oven is dry before switching it back on [PDF].
What precautions should I take when cleaning the oven?
- Do not use steam cleaners for cleaning.
- Do not use abrasive cleaners.
- Do not line the oven with aluminum foil.
- Do not allow cleaning agents to come into contact with the door seal.
- Do not use a dishwasher to clean the shelves and side racks [PDF].
How do I use the ceramic hob?
- Select the correct cooking zone for your pan. Ideally the pan should cover the whole surface of the zone. If your pan is too small, heat may be wasted and the surrounding area may become difficult to clean.
- Turn the corresponding control knob to the desired heat setting. Refer to the table below for heat setting recommendations.
- When cooking is complete, turn the control knob to the “Off” position [PDF].
What are the recommended heat settings for the ceramic hob?
| Heat Setting | Description |
|---|---|
| 1 | Keep Warm Setting (ideal for keeping food warm) |
| 2 – 3 | Low heat settings for simmering and gentle cooking. |
| 4 – 5 | Medium heat settings for sauteing and frying. |
| 6 – 7 | High heat settings for boiling and searing. |
| 8 – 9 | Highest heat settings for rapid boiling and intense cooking, these settings should be used sparingly |
What are some important safety instructions for using the ceramic hob?
- Burn Hazard: The cooking zones on the ceramic hob become very hot during use. Take care when using the hob.
- Hot Surface Indicator: When the hob is in use or cooling down after use, a hot surface indicator light will illuminate on the control panel. It will remain illuminated until the surface has cooled down sufficiently.
- Residual Heat: The ceramic hob retains heat for a long time after the hob has been switched off.
- Pan Size: Use pans with a flat base and a diameter that is equal to or slightly larger than the cooking zone.
- Overboiling: Take care when boiling liquids, overboiling can cause damage to the hob.
- Placement of Objects: Do not place any objects (e.g. cutlery, pot lids, aluminum foil, cloths) on the cooking surface.
- Children: Keep children away from the hob.
- Cleaning: Clean the hob regularly after use. Do not use abrasive cleaners or sharp objects to clean the hob [PDF].
How do I connect my cooker to the gas supply?
The connection of your cooker to the gas supply should only be carried out by an authorized service person or qualified gas installer in accordance with current regulations [PDF].
What are some important safety instructions for using the gas hob?
- Gas Leaks: If you suspect a gas leak, turn off the gas supply immediately and contact a qualified gas installer to rectify the fault.
- Ventilation: Ensure adequate ventilation when using the gas hob.
- Ignition: Always ignite the gas burners before placing a pan on the hob.
- Flame Failure: If the flame goes out for any reason, turn off the gas supply and wait at least 1 minute before attempting to re-ignite the burner.
- Pan Size: Use pans with a flat base and a diameter that is equal to or slightly larger than the gas burner.
- Overboiling: Take care when boiling liquids, overboiling can cause spillages and damage to the hob.
- Placement of Objects: Do not place any objects (e.g. cutlery, pot lids, aluminum foil, cloths) on the hob.
- Children: Keep children away from the hob.
- Cleaning: Clean the hob regularly after use. Do not use abrasive cleaners or sharp objects to clean the hob [PDF].
What should I do before using the grill pan?
Before using the grill pan, lightly grease the base of the pan with cooking oil. This will help to prevent food from sticking to the pan [PDF].
What are some tips for using the grill pan?
- For best results, preheat the grill for a few minutes before cooking.
- Turn the food regularly to ensure even cooking.
- Do not overload the grill pan.
- Allow the grill pan to cool before cleaning [PDF].
What should I do if my appliance does not work?
Check that the appliance is correctly connected to the mains supply and that the fuse in the plug is intact. Check that the main oven and the top oven controls are in the “Off” position [PDF].
What should I do if the oven does not heat up?
Check that the thermostat control knob is set to the desired temperature. Check that the timer is not set [PDF].
What should I do if the oven light does not work?
Check that the bulb has not blown. Replace the bulb if necessary [PDF].
What should I do if the oven is smoking or smells bad?
This is usually caused by a build-up of food debris in the oven. Clean the oven thoroughly, paying particular attention to the oven cavity and the door seal [PDF].
What should I do if the oven door is difficult to open or close?
Check that the door hinges are not loose or damaged. Adjust the hinges if necessary. Check that the door seal is not damaged or obstructed. Clean the door seal with warm, soapy water [PDF].
What should I do if the ceramic hob is not working?
Check that the appliance is correctly connected to the mains supply and that the fuse in the plug is intact. Check that the cooking zone control knob is turned to the desired heat setting [PDF].
What should I do if the ceramic hob is not heating up evenly?
This could be caused by an uneven pan base or by using a pan that is too small for the cooking zone. Use a pan with a flat base and a diameter that is equal to or slightly larger than the cooking zone [PDF].
What should I do if the ceramic hob is making a cracking or popping sound?
This is normal and is caused by the expansion and contraction of the ceramic glass. It is not a cause for concern [PDF].
What should I do if the gas hob is not working?
Check that the gas supply to the appliance is turned on. Check that the gas burner control knob is turned to the desired heat setting [PDF].
What should I do if the gas hob is not igniting?
Check that the ignition electrode is clean and free from grease or debris. Clean the electrode with a soft brush or a cotton bud dipped in alcohol [PDF].
What should I do if the gas flame is yellow or sooty?
This indicates that the gas burner is not burning correctly. Adjust the air shutter on the gas burner to increase the air supply. If the problem persists, contact a qualified gas installer to service the appliance [PDF].
Who do I contact for further assistance?
Argos LTD. 489-499 Avebury Way Milton Keynes MK9 2NW [PDF].
How do I operate the ceramic heater?
The ceramic heater is operated by turning the control knob to the required setting. Near each control knob is a symbol that indicates the heater that is controlled by that knob. The on/off light on the control panel will show if any of the ceramic heaters are in use.
What do the knob positions on the ceramic heater correspond to?
| Knob Position | Function |
|---|---|
| 0 | Off position |
| 1 | Keep warm position |
| 2-3 | Heating position at low heat |
| 4-5-6 | Cooking, roasting, boiling |
Important: The knob rotation direction may differ according to the product specification.
How do I activate/deactivate the outer zone of a dual/oval heater?
To activate the outer zone of a dual/oval heater, turn the knob to position . Both outer zones will switch on. To deactivate the outer zone of a dual/oval heater, turn the knob to the ‘Off’ position. Both outer zones will switch off.
What is the residual heat indicator?
After using the hob, there will be heat stored in the vitroceramic glass called residual heat. If the residual heat level is greater than +60°C, the residual heat indicator will be active for the cooking zone which is above this temperature.
What happens if the power supply to the hob is disconnected while the residual heat indicator is on?
If the power supply to the hob is disconnected while the residual heat indicator is on, the warning light will flash when the power is reconnected. The display will flash until the residual heat has decreased or until one of the cooking zones is activated.
Why do the heated areas seem to be switching on and off when ceramic heaters are operated in higher heat settings?
When ceramic heaters are operated in higher heat settings, the heated areas may be seen switching on and off. This is due to a safety device that prevents the glass from overheating. This is normal at high temperatures, causing no damage to the hob and little delay in cooking times.
What are some important warnings to remember when operating the ceramic heaters?
- Never operate the hob without pans on the cooking zone.
- Use only flat saucepans with a sufficiently thick base.
- Make sure the bottom of the pan is dry before placing it on the hob.
- While the cooking zone is in operation, it is important to ensure that the pan is centered correctly above the zone.
What are some hints and tips for using the ceramic heaters?
- In order to conserve energy, never use a pan with a different diameter to the hotplate being used.
- Do not use pans with rough bottoms since these can scratch the glass ceramic surface.
- If possible, always place lids on the pans.
- The temperature of accessible parts may become high while the appliance is operating. Keep children and animals well away from the hob during operation and until it has fully cooled after operation.
- If you notice a crack on the cooktop, it must be switched off immediately and replaced by authorized service personnel.
What is the defrost function?
The defrost function will not cook or bake your food, it will only help to defrost it. To use the defrost function, place your frozen food on a shelf in the middle of the oven. It is recommended that you put an oven tray under the defrosting food to catch accumulated water due to melting ice.
How do I switch on the defrost function?
Switch on the DEFROST function using the main oven function control knob. The oven’s warning lights will switch on, and the fan will start operating.
What is the turbo function?
The turbo function evenly disperses the heat in the oven so all food on all racks will cook evenly. It is recommended that you preheat the oven for 10 minutes.
How do I switch on the turbo function?
Switch on the TURBO function using the main oven function control knob. The oven’s thermostat and warning lights will switch on, and the ring heating element and fan will start operating. The temperature can be adjusted using the main oven function control knob.
What is the static cooking function?
The heat generated by the upper and lower heating elements ensures that food is cooked evenly. You will find this setting ideal for cooking cakes, baked pasta, lasagne, and pizza. We recommend that the oven is preheated for 10 minutes before use and that you cook on one rack at a time.
How do I switch on the static cooking function?
Switch on the STATIC function using the top oven function control knob. The oven thermostat and warning lights will illuminate, and the upper and lower heating elements will switch on. The temperature can be adjusted using the top oven function control knob.
What is the upper heating function?
The UPPER heating function is ideal for heating food or for frying the top of food that has already been cooked, as the heat radiates from the upper heating element closest to the top of the food.
How do I switch on the upper heating function?
Switch on the UPPER function using the top oven function control knob. The oven thermostat and warning lights will illuminate, and the upper heating element will switch on. The temperature setting will set to the highest level for this function.
What is the grilling function?
Use this function for grilling. When you have finished grilling, switch the top oven off. Keep children away from the oven during grilling and until it has fully cooled after use. Warning: The top oven door must be kept open during use of this function.
How do I switch on the grilling function?
Switch on the GRILL function using the top oven function control knob. The oven thermostat and warning lights will illuminate, and the grill heating element will switch on. The temperature setting will set to the highest level for this function.
What is the faster grilling function?
Use this function for wide area grilling. When you have finished grilling, switch the top oven off. Keep children away from the oven during grilling and until the oven has fully cooled after use. Warning: The top oven door must be kept open during use of this function.
How do I switch on the faster grilling function?
Switch on the FASTER GRILL function using the function selector knob. The oven thermostat and warning lights will illuminate, and the grill and upper heating elements will switch on. The temperature setting will set to the highest level when this function is selected.
How do I adjust the time?
The time must be set before you start using the oven. Following the power connection, the symbol “A” and “000” will flash on the display.
- Press the “+” and “-” keys simultaneously. Symbol will appear, and the dot in the middle of the screen will start to flash.
- Adjust the time while the dot is flashing using the “+” and “-” keys.
- After a few seconds, the dot will stop flashing and will remain illuminated.
How do I adjust the audible warning time?
The audible warning time can be set to any time between 0:00 and 23:59 hours. The audible warning time is for warning purposes only. The oven will not be activated with this function.
- Press “MODE”. The symbol will begin to flash and “000” will be displayed.
- Select the desired time period using the “+” and “-” keys while is flashing.
- The symbol will remain illuminated, the time will be saved and the warning will be set.
What happens when the timer reaches zero?
When the timer reaches zero, an audible warning will sound and the symbol will flash on the display. Press any key to stop the audible warning and the symbol will disappear.
How do I use the semi-automatic time adjustment (cooking period)?
This function helps you to cook for a fixed period of time. A time range between 0 and 10 hours can be set. Prepare the food for cooking and put it in the oven.
- Select the desired cooking function and the temperature using the control knobs.
- Press “MODE” until you see “dur” and symbol on the display screen. The symbol “A” will flash.
- Select the desired cooking time period using the “+” and “-” keys.
- The current time will reappear on the screen, and the symbols “A”, and will remain illuminated.
What happens when the timer reaches zero while using the semi-automatic time adjustment (cooking period)?
When the timer reaches zero, the oven will switch off and an audible warning will sound. The symbols “A” and will flash. Turn both control knobs to the “0” position and press any key on the timer to stop the warning sound. The symbols will disappear and the timer will switch back to manual function.
How do I use the semi-automatic time adjustment (finishing time)?
This function automatically starts the oven so that cooking will finish at a set time. You can set an end time of up to 10 hours after the current time of day. Prepare the food for cooking and put it in the oven.
- Select the desired cooking function and the temperature using the control knobs.
- Press “MODE” until you see “end” and symbol on the display screen. “A” and the current time of day will flash.
- Use the “+” and “-” buttons to set the desired finishing time.
- The current time will reappear on the screen, the symbols “A”, and will remain illuminated.
What happens when the timer reaches zero while using the semi-automatic time adjustment (finishing time)?
When the timer reaches zero, the oven will switch off and an audible warning will sound. The symbol “A” and will flash. Turn both control knobs to the “0” position and press any key on the timer to stop the sound. The symbol will disappear and the timer will switch back to manual function.
How do I use full-automatic programming?
This function is used to start cooking after a certain period of time and for a certain duration. A time of up to 10 hours after the current time of day can be set. Prepare the food for cooking and put it in the oven.
- Select the desired cooking function and the temperature using the control knobs.
- Press “MODE” until you see “dur” and symbol on the screen. The symbol “A” will flash.
- Select the desired cooking time period using the “+” and “-” keys.
- The current time will reappear on the screen, the symbols “A”, and will remain illuminated.
- Press “MODE” until you see “end” and symbol on the screen. The time and the symbols “A” and will flash.
- Select the desired finishing time using the “+” and “-” keys.
- Add the cooking period to the current time of day. You can set a time of up to 23 hours and 59 minutes after this.
- The current time will reappear on the screen, and the symbols “A”, and will remain illuminated.
What happens when the timer reaches zero while using full-automatic programming?
The operating time will be calculated and the oven will automatically start so that cooking will finish at the set finishing time. When the timer reaches zero, the oven will switch off, an audible warning will sound and the symbols “A” and will flash. Turn both control knobs to the “0” position and press any key to stop the sound. The symbol will disappear and the timer will switch back to manual function.
How do I adjust the sound?
To adjust the volume of the audible warning sound, while the current time of day is displayed, press and hold the “-” button for 1-2 seconds until an audible signal sounds. After this, each time the “-” button is pressed, a different signal will sound. There are three different types of signal sounds. Select the desired sound and do not press any other buttons. After a short time, the selected sound will be saved.
When is the grill pan set best used?
The grill pan set is best used for grilling steaks and similar foods. Warning: The grill pan has a detachable handle. Make sure when using the grill pan handle that it is centralized and secure. Use two hands to hold the grill pan handle. Do not leave the handle in position while grilling is in operation.
When is the wire grid best used?
The wire grid is best used for grilling or for processing food in oven-friendly containers. Warning: The wire grid is used for grilling or for processing food in other containers.
What are some energy saving tips for the oven?
- Cook the meals together, if possible.
- Keep the pre-heating time short.
- Do not elongate cooking time.
- Do not forget to turn-off the oven at the end of cooking.
- Do not open oven door during cooking period.
What are some energy saving tips for the hob?
- Use cookwares having flat base.
- Use cookwares with proper size.
- Use cookwares with lid.
- Minimize the amount of liquid or fat.
- When liquid starts boiling, reduce the setting.
What should I do before cleaning is carried out on my appliance?
Switch off the appliance and allow it to cool before cleaning is to be carried out.
What are the general instructions for cleaning my appliance?
- Check whether the cleaning materials are appropriate and recommended by the manufacturer before use on your appliance.
- Use cream cleaners or liquid cleaners which do not contain particles. Do not use caustic (corrosive) creams, abrasive cleaning powders, rough wire wool or hard tools as they may damage the cooker surfaces.
- Do not use cleaners that contain particles, as they may scratch the glass, enamelled and/or painted parts of your appliance.
- Should any liquids overflow, clean them immediately to avoid parts becoming damaged.
- Do not use steam cleaners for cleaning any part of the appliance.
How do I clean the inside of the oven?
- The inside of enamelled ovens are best cleaned while the oven is warm.
- Wipe the oven with a soft cloth soaked in soapy water after each use. Then, wipe the oven over again with a wet cloth and dry it.
- You may need to use a liquid cleaning material occasionally to completely clean the oven.
What safety precaution should I take regarding the ceramic cooktop?
Ceramic glass can hold heavy utensils but may be broken if it is hit with a sharp object.
What should I do if the surface of my ceramic cooktop is cracked?
If the surface is cracked, to avoid the possibility of an electric shock, switch off the appliance and call for service.
How do I clean the ceramic glass?
- Use a cream or liquid cleaner to clean the vitroceramic glass. Then, rinse and dry the glass thoroughly with a dry cloth.
- Do not use cleaning materials meant for steel as they may damage the glass.
- Spilt sugary or sweet foods must be cleaned immediately after the glass has cooled.
- Dust on the surface must be cleaned with a wet cloth.
- Any changes in colour to the ceramic glass will not affect the structure or durability of the ceramic and is not due to a change in the material.
What are some reasons for colour changes to the ceramic glass?
- Spilt food has not been cleaned off the surface.
- Using incorrect dishes on the hob will erode the surface.
- Using the wrong cleaning materials.
How do I clean the glass parts?
- Clean the glass parts of your appliance on a regular basis.
- Use a glass cleaner to clean the inside and outside of the glass parts. Then, rinse and dry them thoroughly with a dry cloth.
How do I clean the enamelled parts?
- Clean the enamelled parts of your appliance on a regular basis.
- Wipe the enamelled parts with a soft cloth soaked in soapy water. Then, wipe them over again with a wet cloth and dry them.
- Do not clean the enamelled parts while they are still hot from cooking.
- Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the enamel for a long time.
How do I clean the stainless steel parts (if available)?
- Clean the stainless steel parts of your appliance on a regular basis.
- Wipe the stainless steel parts with a soft cloth soaked in only water. Then, dry them thoroughly with a dry cloth.
- Do not clean the stainless steel parts while they are still hot from cooking.
- Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the stainless steel for a long time.
How do I remove the oven door?
Before cleaning the oven door glass, you must remove the oven door, as shown below.
- Open the oven door.
- Open the saddle bracket (a) (with the aid of a screwdriver) up to the end position.
- Close the door until it almost reaches the fully closed position and remove the door by pulling it towards you.
Who should carry out maintenance on my appliance?
The maintenance of this appliance should be carried out by an authorised service person or qualified technician only.
What should I do before cleaning my appliance?
Switch off the appliance and allow it to cool before cleaning your appliance.
How do I change the oven lamp?
- Remove the glass lens, then remove the bulb.
- Insert the new bulb (resistant to 300 °C) to replace the bulb that you removed (230 V, 15-25 Watt, Type E14).
- Replace the glass lens, and your oven is ready for use.
- The lamp is designed specifically for use in household cooking appliances. It is not suitable for household room illumination.
What should I do if I still have a problem with my appliance after checking the basic troubleshooting steps?
Please contact an authorised service person or qualified technician.
What should I do if the hob or cooking zones cannot be switched on?
| Problem | Possible Cause | Solution |
|---|---|---|
| The hob or cooking zones cannot be switched on. | There is no power supply. | Check the household fuse for the appliance. Check whether there is a power cut by trying other electronic appliances. |
What should I do if the oven does not switch on?
| Problem | Possible Cause | Solution |
|---|---|---|
| Oven does not switch on. | Power is switched off. | Check whether there is power supplied. Also check that other kitchen appliances are working. |
What should I do if there is no heat or the oven does not warm up?
| Problem | Possible Cause | Solution |
|---|---|---|
| No heat or oven does not warm up. | Oven temperature control is incorrectly set. Oven door has been left open. | Check the oven temperature control knob is set correctly. |
What should I do if cooking is uneven within the oven?
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooking is uneven within the oven. | Oven shelves are incorrectly positioned. | Check that the recommended temperatures and shelf positions are being used. Do not frequently open the door unless you are cooking things that need to be turned. If you open the door often, the interior temperature will be lower and this may affect the results of your cooking. |
What should I do if the oven light (if available) does not operate?
| Problem | Possible Cause | Solution |
|---|---|---|
| Oven light (if available) does not operate. | Lamp has failed. Electrical supply is disconnected or switched off. | Replace lamp according to the instructions. Make sure the electrical supply is switched on at the wall socket outlet. |
What should I do if the timer buttons cannot be pressed properly?
| Problem | Possible Cause | Solution |
|---|---|---|
| The timer buttons cannot be pressed properly. | There is foreign matter caught between the timer buttons. Touch model: there is moisture on the control panel. The key lock function is set. | Remove the foreign matter and try again. Remove the moisture and try again. Check whether the key lock function is set. |
What should I do if the oven fan (if available) is noisy?
| Problem | Possible Cause | Solution |
|---|---|---|
| The oven fan (if available) is noisy. | Oven shelves are vibrating. | Check that the oven is level. Check that the shelves and any bake ware are not vibrating or in contact with the oven back panel. |
What should I do if I need to transport the product?
If you need to transport the product, use the original product packaging and carry it using its original case. Follow the transport signs on the packaging. Tape all independent parts to the product to prevent damaging the product during transport.
What should I do for transportation if I do not have the original packaging?
Prepare a carriage box so that the appliance, especially the external surfaces of the product, is protected against external threats.
How should the product be transported?
The product must be transported upright position.
What does the symbol on the product or on its packaging indicate?
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
What are the benefits of ensuring this product is disposed of correctly?
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Who should I contact for more detailed information about recycling of this product?
For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
How long is this product guaranteed for?
This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the purchase price refunded) where possible during this period by the dealer from who your purchased the unit.
What are the provisions of the guarantee?
- The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items.
- The product must be correctly installed and operated in accordance with the instructions contained in the manual.
- It must be used solely for domestic purposes. The guarantee will be rendered invalid if the product is re-sold or has been damaged by inexpert repair.
- Specifications are subject to change without notice.
- Bush disclaim any liability for loss or damage arising from the breakdown of the product.
- This guarantee is in addition to and does not diminish your statutory or legal rights.
What should I do if I provide information about another person?
If you provide us with information about another person, you confirm that they have appointed you to act for them, to consent to the processing of their personal data including sensitive personal data and that you have informed them of our identity and the purposes (as set out in the Important Data Privacy notice displayed overleaf) for which their personal data will be processed.
What am I entitled to ask for?
You are entitled to ask for a copy of the information we hold about you (for which we may charge a small fee) and to have any inaccuracies in your information corrected.
Why may we monitor or record your communications with us?
For quality control and training purposes, we may monitor or record your communications with us.
Who should I contact if my personal details change, if I change my mind about any of my marketing preferences or if I have any queries about how we use my information?
Please let us know by contacting our Data Protection Officer, Domestic & General, Leicester House 17 Leicester Street, Bedworth, Warwickshire CV12 8JP.
How can I activate my 12 month guarantee?
Call us now and activate your 12 month guarantee.
How do I contact Bush?
- http://www.bushregistration.co.uk
- FREEPHONE* 0800 597 8548
- Lines are open 8am – 8pm, 365 days a year.
- *Calls may be recorded and monitored.
What is Bush’s contact information?
- http://www.argos-support.co.uk
- Helpline: 0345 604 0105
If I require any technical guidance or find that my Cooker is not operating as intended where can I find a simple solution?
A simple solution can often be found in the Troubleshooting section of these instructions or online at http://www.argos-support.co.uk.
Who can I call If I still require further assistance?
Call one of our experts on 0345 604 0105*.
What information should I have ready to help give a fast and efficient service?
- Model Ref.
- Serial number
- Date of purchase
Where can I find the model reference and serial number?
You can find these on the rating plate – a small information panel (usually a sticker or metal plate) on the rear of your appliance.
Where can I find the date of purchase?
This will be shown on your receipt.
What is the disclaimer about call charges?
Local call rates applies* Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday. *Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff. Mobile and other providers costs may vary, see http://www.bt.com/pricing for details. For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from Republic of Ireland will attract international call charges.
What should I do with the original packaging materials?
Keep the original packaging materials in a safe place. Transport the product by using its original packaging. Follow the instructions that are printed on the packaging.
What precautions should I take if I do not have the original packaging materials?
If you do not have the original packaging materials, take the necessary precautions in order to prevent the exterior panels, and the glass surfaces of the product from being damaged.
CLICK HERE TO DOWNLOAD BUSH BDBL60ELB (01) PDF MANUAL
Fan parts number