Free English BRILLIANT EVOLUTION BRRC153IR (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD BRILLIANT EVOLUTION BRRC153IR (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the light output of the BRILLIANT EVOLUTION BRRC153IR?
The light output of the BRILLIANT EVOLUTION BRRC153IR is 55 lumens.
What is the correlated color temperature of the BRILLIANT EVOLUTION BRRC153IR?
The correlated color temperature (CCT) of the BRILLIANT EVOLUTION BRRC153IR is 3000, which produces a warm white light.
What is the run time of the BRILLIANT EVOLUTION BRRC153IR?
The BRILLIANT EVOLUTION BRRC153IR has an operating run time of 100 hours.
What type and quantity of batteries does the BRILLIANT EVOLUTION BRRC153IR require?
The BRILLIANT EVOLUTION BRRC153IR requires three (3) AA batteries. The batteries are not included with the product.
How many LEDs does the BRILLIANT EVOLUTION BRRC153IR have?
The BRILLIANT EVOLUTION BRRC153IR contains 3 LEDs.
What is the LED beam angle on the BRILLIANT EVOLUTION BRRC153IR?
The LED beam angle of the BRILLIANT EVOLUTION BRRC153IR is 120 degrees.
What are the dimensions of the BRILLIANT EVOLUTION BRRC153IR?
The BRILLIANT EVOLUTION BRRC153IR measures 3-3/8 inches in diameter and 1-1/4 inches in height.
What are the technical specifications of the BRILLIANT EVOLUTION BRRC153IR?
The specifications for the BRILLIANT EVOLUTION BRRC153IR are listed in the following table:
| Specification | Detail |
|---|---|
| Light Output (Lumens) | 55 |
| Correlated Color Temperature (CCT) | 3000 (Warm White) |
| Run Time | 100 hours |
| Batteries (not included) | AA x 3 |
| Number of LEDs | 3 |
| LED Beam Angle | 120 degrees |
| Dimensions | 3-3/8 inches diameter / 1-1/4 inches high |
What controls and components are located on the BRILLIANT EVOLUTION BRRC153IR?
The primary controls and components on the BRILLIANT EVOLUTION BRRC153IR are:
1. ON/OFF Tap Lens
2. Battery Compartment
How do you manually turn the BRILLIANT EVOLUTION BRRC153IR on and off?
Press the lens of the BRILLIANT EVOLUTION BRRC153IR to turn the light ON or OFF.
Is a remote control included with the BRILLIANT EVOLUTION BRRC153IR?
No, the remote control is not included with the BRILLIANT EVOLUTION BRRC153IR.
Can the BRILLIANT EVOLUTION BRRC153IR be operated using a remote control?
Yes, the BRILLIANT EVOLUTION BRRC153IR is compatible with the remote sold with other remote controlled puck light sets from the manufacturer.
How should the wireless icon be positioned when mounting the BRILLIANT EVOLUTION BRRC153IR?
If you are using the BRILLIANT EVOLUTION BRRC153IR with a remote, make sure the wireless icon is facing out, towards the remote, when mounting the puck light.
Why must the wireless icon face outward when mounting the BRILLIANT EVOLUTION BRRC153IR?
Facing the wireless icon outward towards the remote ensures that the BRILLIANT EVOLUTION BRRC153IR properly receives the signal from the remote control.
Where can you find operating instructions for remote control usage with the BRILLIANT EVOLUTION BRRC153IR?
Refer to the manual included with the remote controlled puck light set for complete remote operating instructions.
What installation methods can be used to mount the BRILLIANT EVOLUTION BRRC153IR?
The BRILLIANT EVOLUTION BRRC153IR can be mounted using either adhesive tape or screws.
What are the steps for installing the BRILLIANT EVOLUTION BRRC153IR using adhesive tape?
To install the BRILLIANT EVOLUTION BRRC153IR using adhesive tape, follow these steps:
1. Make sure the area where you want to attach the light is clean and clear of debris and dust.
2. Attach adhesive tape to mounting bracket.
3. Place mounting bracket in desired location. Press firmly to ensure adhesive sticks.
How should the surface be prepared prior to applying adhesive tape for the BRILLIANT EVOLUTION BRRC153IR?
Make sure the area where you want to attach the light is completely clean and clear of debris and dust before mounting.
What caution should be taken when using adhesive tape with the BRILLIANT EVOLUTION BRRC153IR?
Adhesive tape may remove paint or damage the surface when removed.
What are the steps for installing the BRILLIANT EVOLUTION BRRC153IR using screws?
To install the BRILLIANT EVOLUTION BRRC153IR using screws, follow these steps:
1. Remove mounting bracket from light.
2. Use the mounting bracket as a guide to drill two (2) pilot holes. Secure mounting bracket to surface with screws (included). Do not over tighten screws.
3. Attach light to mounting bracket.
Are mounting screws included with the BRILLIANT EVOLUTION BRRC153IR?
Yes, the screws required for mounting the BRILLIANT EVOLUTION BRRC153IR are included with the product.
How many pilot holes need to be drilled when installing the BRILLIANT EVOLUTION BRRC153IR with screws?
You must drill two (2) pilot holes using the mounting bracket as a guide.
What warning is given regarding tightening the mounting screws on the BRILLIANT EVOLUTION BRRC153IR?
Do not over tighten the screws when securing the mounting bracket to the surface.
How do you know when to replace the batteries in the BRILLIANT EVOLUTION BRRC153IR?
The batteries need to be replaced if the LEDs appear to be dim.
What is the procedure to replace the batteries in the BRILLIANT EVOLUTION BRRC153IR?
To replace the batteries in the BRILLIANT EVOLUTION BRRC153IR, perform the following steps:
1. Remove battery compartment cover.
2. Remove old batteries (if replacing batteries).
3. Insert three (3) new AA batteries (not included).
4. Make sure to follow the battery polarity guide when installing new batteries.
5. Replace battery compartment cover.
What can happen if batteries are installed with reversed polarity in the BRILLIANT EVOLUTION BRRC153IR?
Reversed batteries may cause damage to the BRILLIANT EVOLUTION BRRC153IR device.
Can different battery types be mixed when powering the BRILLIANT EVOLUTION BRRC153IR?
No, do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
Can old and new batteries be used together in the BRILLIANT EVOLUTION BRRC153IR?
No, do not mix old and new batteries. Replace all batteries of a set at the same time.
What should be done to the contacts before installing batteries in the BRILLIANT EVOLUTION BRRC153IR?
Clean the battery contacts and also those of the device prior to battery installation.
Is it safe to dispose of exhausted batteries from the BRILLIANT EVOLUTION BRRC153IR in fire?
No, do not dispose of batteries in fire.
When should batteries be removed from the BRILLIANT EVOLUTION BRRC153IR?
Remove batteries if they are consumed or if the product is to be left unused for an extended period of time.
What size and grade of battery should be used for the BRILLIANT EVOLUTION BRRC153IR?
Use only the size and type of batteries specified (AA), and always purchase the correct size and grade of battery most suitable for the intended use.
Is the BRILLIANT EVOLUTION BRRC153IR rated for outdoor use?
No, the BRILLIANT EVOLUTION BRRC153IR is designed for indoor use only.
How should the BRILLIANT EVOLUTION BRRC153IR be cleaned?
To clean the BRILLIANT EVOLUTION BRRC153IR, use a soft dry cloth.
Can the BRILLIANT EVOLUTION BRRC153IR be cleaned with or submerged in liquids?
No, to reduce the risk of electrical shock, do not put the unit in water or other liquid.
Where should you avoid storing or placing the BRILLIANT EVOLUTION BRRC153IR to prevent liquid exposure?
Do not place or store the unit where it can fall or be pulled into a sink or tub.
Where is the adhesive tape attached on the BRILLIANT EVOLUTION BRRC153IR mounting bracket?
The adhesive tape is attached directly to the mounting bracket at the center area designated for adhesive tape placement.
What directional indicators are on the mounting bracket of the BRILLIANT EVOLUTION BRRC153IR?
The mounting bracket displays directional arrows labeled “OPEN” and “CLOSE” to indicate which way to turn the bracket when removing or attaching it to the light.
How do you ensure proper adhesion when sticking the BRILLIANT EVOLUTION BRRC153IR bracket to a surface?
Place the mounting bracket in the desired location and press firmly to ensure the adhesive sticks.
What ensures that the BRILLIANT EVOLUTION BRRC153IR does not suffer polarity-related damage?
Always follow the polarity markings (+ and -) shown in the battery polarity guide inside the battery compartment when inserting batteries.
Can rechargeable Nickel Cadmium batteries be used with alkaline batteries in the BRILLIANT EVOLUTION BRRC153IR?
No, you must never mix rechargeable (Nickel Cadmium) batteries with alkaline batteries in the BRILLIANT EVOLUTION BRRC153IR.
Can standard Carbon-Zinc batteries be combined with alkaline batteries in the BRILLIANT EVOLUTION BRRC153IR?
No, standard (Carbon-Zinc) batteries must not be mixed with alkaline batteries in the device.
What should you use as a drill guide when screw-mounting the BRILLIANT EVOLUTION BRRC153IR?
Use the mounting bracket itself as a guide to drill the two pilot holes into the mounting surface.
How do you reattach the BRILLIANT EVOLUTION BRRC153IR to the bracket after screw mounting?
After the mounting bracket is secured to the surface with the screws, attach the light back onto the mounting bracket and turn it toward the close direction.
What is the function of the tap lens on the BRILLIANT EVOLUTION BRRC153IR?
The tap lens acts as the primary power control on the unit, allowing you to turn the light ON and OFF by pressing the lens.
How is the battery compartment cover removed on the BRILLIANT EVOLUTION BRRC153IR?
Follow the directional “OPEN” indicators on the rear mounting/cover bracket to twist and remove the cover from the battery compartment.
What is the diameter of the BRILLIANT EVOLUTION BRRC153IR?
The diameter of the BRILLIANT EVOLUTION BRRC153IR is 3-3/8 inches.
What is the height of the BRILLIANT EVOLUTION BRRC153IR?
The height of the BRILLIANT EVOLUTION BRRC153IR is 1-1/4 inches.
Why must all batteries be replaced at the same time in the BRILLIANT EVOLUTION BRRC153IR?
All batteries of a set must be replaced at the same time to avoid mixing old and new batteries, which ensures proper device operation and safety.
Can the BRILLIANT EVOLUTION BRRC153IR be submerged in water during cleaning?
No, do not put the unit in water or any other liquid to reduce the risk of electrical shock. Clean only with a soft dry cloth.
What indicates whether the BRILLIANT EVOLUTION BRRC153IR is locked onto its bracket?
The “CLOSE” and “OPEN” directional indicators on the bracket guide when the light is securely attached or loosened.
CLICK HERE TO DOWNLOAD BRILLIANT EVOLUTION BRRC153IR (01) PDF DOCUMENT