Free English BRILLIANT EVOLUTION BRRC152IR (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD BRILLIANT EVOLUTION BRRC152IR (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.


How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.


What is the BRILLIANT EVOLUTION BRRC152IR?

The BRILLIANT EVOLUTION BRRC152IR is a wireless LED puck light designed for indoor use.


What are the primary locations of controls on the BRILLIANT EVOLUTION BRRC152IR?

The controls and main parts of the BRILLIANT EVOLUTION BRRC152IR include:

1. ON/OFF Tap Lens

2. Battery Compartment


How do you manually turn the BRILLIANT EVOLUTION BRRC152IR on and off?

Press the lens to turn the light ON or OFF.


Is a remote control included with the BRILLIANT EVOLUTION BRRC152IR?

No, the remote control is NOT included with this product.


Can the BRILLIANT EVOLUTION BRRC152IR be operated using a remote control?

Yes. The puck lights are compatible with the remote sold with other remote controlled puck light sets from the same manufacturer. Refer to the manual included with the remote controlled puck light set for operating instructions.


How should the BRILLIANT EVOLUTION BRRC152IR be positioned when mounting if using a remote?

If you are using the puck lights with a remote, make sure the signal icon is facing out, towards the remote, when mounting the puck lights. This will ensure that the puck lights receive the signal from the remote.


What methods can be used to install the BRILLIANT EVOLUTION BRRC152IR?

The BRILLIANT EVOLUTION BRRC152IR can be installed using adhesive tape or using screws.


What are the step-by-step instructions for installing the BRILLIANT EVOLUTION BRRC152IR using adhesive tape?

Step 1. Make sure the area where you want to attach the light is clean and clear of debris and dust.

Step 2. Attach adhesive tape to mounting bracket.

Step 3. Place mounting bracket in desired location. Press firmly to ensure adhesive sticks.


What caution should be taken when using adhesive tape with the BRILLIANT EVOLUTION BRRC152IR?

Adhesive tape may remove paint or damage the surface when removed.


What are the step-by-step instructions for mounting the BRILLIANT EVOLUTION BRRC152IR with screws?

Step 1. Remove mounting bracket from light.

Step 2. Use the mounting bracket as a guide to drill two (2) pilot holes. Secure mounting bracket to surface with screws (included). Do not over tighten screws.

Step 3. Attach light to mounting bracket.


Are the mounting screws included with the BRILLIANT EVOLUTION BRRC152IR?

Yes, mounting screws are included with the product.


How many pilot holes need to be drilled when installing the BRILLIANT EVOLUTION BRRC152IR with screws?

Two (2) pilot holes should be drilled using the mounting bracket as a guide.


How do you know when the batteries need to be replaced in the BRILLIANT EVOLUTION BRRC152IR?

If the LEDs appear to be dim, the batteries need to be replaced.


What are the steps to replace the batteries in the BRILLIANT EVOLUTION BRRC152IR?

Step 1. Remove battery compartment cover.

Step 2. Remove old batteries (if replacing batteries).

Step 3. Insert three (3) new AA batteries (not included).

Step 4. Make sure to follow the battery polarity guide when installing new batteries.

Step 5. Replace battery compartment cover.


What type and quantity of batteries does the BRILLIANT EVOLUTION BRRC152IR require?

The unit requires three (3) AA batteries.


Are batteries included with the purchase of the BRILLIANT EVOLUTION BRRC152IR?

No, the AA batteries are not included.


What is the light output specification for the BRILLIANT EVOLUTION BRRC152IR?

The light output is 55 Lumens.


What is the Correlated Color Temperature (CCT) of the BRILLIANT EVOLUTION BRRC152IR?

The Correlated Color Temperature (CCT) is 3000 (Warm White).


What is the expected run time of the BRILLIANT EVOLUTION BRRC152IR?

The run time is 100 hours.


How many LEDs are featured in the BRILLIANT EVOLUTION BRRC152IR?

There are 3 LEDs.


What is the LED beam angle on the BRILLIANT EVOLUTION BRRC152IR?

The LED beam angle is 120 degrees.


What are the dimensions of the BRILLIANT EVOLUTION BRRC152IR?

The dimensions are 3-3/8 inches in diameter and 1-1/4 inches in height.


What does the Product Information Chart specify for the BRILLIANT EVOLUTION BRRC152IR?

Specification Detail
Light Output (Lumens) 55
Correlated Color Temperature (CCT) 3000 (Warm White)
Run Time 100 hours
Batteries (not included) AA x 3
Number of LEDs 3
LED Beam Angle 120 degrees

Can the BRILLIANT EVOLUTION BRRC152IR be used outside?

No, the unit is rated for INDOOR USE ONLY.


What warnings should be observed to reduce the risk of electrical shock with the BRILLIANT EVOLUTION BRRC152IR?

To reduce the risk of electrical shock, do not put the unit in water or other liquid. Do not place or store the unit where it can fall or be pulled into a sink or tub.


How should the BRILLIANT EVOLUTION BRRC152IR be cleaned?

To clean the unit, use a soft dry cloth.


What battery precautions must be followed for the BRILLIANT EVOLUTION BRRC152IR?

1. Use only the size and type of batteries specified.

2. Always purchase the correct size and grade of battery most suitable for the intended use.

3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

4. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.

5. Replace all batteries of a set at the same time. Do not mix old and new batteries.

6. Clean the battery contacts and also those of the device prior to battery installation.

7. Do not dispose of batteries in fire.

8. Remove batteries if consumed or if product is to be left unused for an extended period of time.


What could happen if batteries are inserted in reverse polarity inside the BRILLIANT EVOLUTION BRRC152IR?

Reversed batteries may cause damage to the device.


Can you mix old and new batteries in the BRILLIANT EVOLUTION BRRC152IR?

No. You should replace all batteries of a set at the same time and not mix old and new batteries.


Can you mix alkaline, standard, or rechargeable batteries in the BRILLIANT EVOLUTION BRRC152IR?

No. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.


What should you do to the contacts before installing batteries in the BRILLIANT EVOLUTION BRRC152IR?

Clean the battery contacts and also those of the device prior to battery installation.


Is it safe to dispose of batteries from the BRILLIANT EVOLUTION BRRC152IR in fire?

No, do not dispose of batteries in fire.


What should be done if the BRILLIANT EVOLUTION BRRC152IR is left unused for an extended period?

Remove the batteries if the product is to be left unused for an extended period of time.


What should be done when the batteries in the BRILLIANT EVOLUTION BRRC152IR are fully consumed?

Remove the batteries if they are consumed.


What precaution must be taken when securing the mounting bracket with screws on the BRILLIANT EVOLUTION BRRC152IR?

Do not over tighten the screws when securing the mounting bracket to the surface.


How do you ensure the adhesive tape sticks properly when mounting the BRILLIANT EVOLUTION BRRC152IR?

Ensure the mounting area is clean and clear of dust and debris, place the mounting bracket in the desired location, and press firmly to ensure the adhesive sticks.


CLICK HERE TO DOWNLOAD BRILLIANT EVOLUTION BRRC152IR (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.