FREE ENGLISH BOSCH PGP6B (01) PDF USER GUIDE
FREE ENGLISH BOSCH PGP6B (01) PDF USER MANUAL
FREE ENGLISH BOSCH PGP6B (01) PDF OWNER GUIDE
FREE ENGLISH BOSCH PGP6B (01) PDF OWNER MANUAL
FREE ENGLISH BOSCH PGP6B (01) PDF REFERENCE GUIDE
FREE ENGLISH BOSCH PGP6B (01) PDF INSTRUCTION GUIDE
FREE ENGLISH BOSCH PGP6B (01) PDF REFERENCE MANUAL
FREE ENGLISH BOSCH PGP6B (01) PDF INSTRUCTION MANUAL
FREE ENGLISH BOSCH PGP6B (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BOSCH PGP6B (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
BOSCH PGP6B (01) PDF SUMMARY:
How do I manually switch on the gas burner?
Press the control knob for the selected burner and turn it anticlockwise to the highest power setting. Then, hold an igniter or a naked flame (such as a lighter or a match) against the burner.
How do I automatically ignite the gas burner?
If your appliance has automatic ignition, press the control knob for the selected burner and turn it anticlockwise to the highest power setting. Sparks will be produced on all burners while you are pressing and holding the control knob, which will ignite the burner. Then, release the control knob and turn it to the required position.
What should I do if the burner does not ignite?
If the burner does not ignite, switch it off and repeat the steps for automatic ignition, but this time, hold the control knob down for longer (up to 10 seconds).
What should I do if the burner does not switch on after 15 seconds?
If the burner does not switch on after 15 seconds, switch off the control knob and open the door or window in the room. Wait at least a minute before igniting the burner again.
How does the safety system (thermocouple) work?
The hob is equipped with a safety system (thermocouple) that cuts off the gas when the burners are accidentally switched off. To ensure this device is active, switch on the burner as usual, and without releasing the control knob, press and hold it down firmly for 4 seconds after lighting the flame.
How do I switch off a burner?
Turn the corresponding control knob clockwise to the 0 setting. A few seconds after the burner is switched off, a sound (thud) will be produced, which is normal.
How should I clean the ignition plugs?
Clean the ignition plugs regularly with a small non-metallic brush. Take care to prevent the ignition plugs from suffering any heavy knocks.
What is normal to hear while the burner is operating?
It is normal to hear a soft whistling noise while the burner is operating.
What should I do if I smell odors when the burner is first used?
When first used, it is normal for the burner to give off odors. This does not pose any risk and does not indicate a malfunction and they will disappear in time.
When should I use additional support for woks?
Use additional support for woks only when using cookware with a domed base on wok burners.
When should I use additional support for espresso makers?
Use additional support for espresso makers only when using cookware with a base less than 12 cm in diameter on the smallest burner.
How do I use the simmer plate?
Place the simmer plate accessory directly on the pan support with the cones facing upwards, never directly over the burner. Centre the pan over the accessory.
How do I use the Simmer Cap burner?
In order to use it, remove the auxiliary burner and replace it with the Simmer Cap burner.
What should I do if burner parts have residue on them?
If any residue is left (baked-on food, drops of grease etc.), it will become stuck to the surface and more difficult to remove later.
How should I clean the burners and pan supports?
Clean the burners and pan supports using soapy water and scrub with a non-wire brush. If the pan supports are fitted with rubber rests, ensure that these are also cleaned.
Why should I dry the burners and pan supports completely?
Always dry the burners and pan supports completely to prevent water droplets or damp patches on the hob at the start of cooking from damaging the enamel.
How should I position the burner caps after cleaning?
After cleaning and drying the burners, make sure the burner caps are correctly positioned on the diffuser.
What size pans should I use for each burner?
Use pans which are the right size for each burner, and do not use small pans on large burners. The flame must not touch the sides of the pan.
What does an orange-colored flame mean?
An orange-colored flame is normal, and is caused by the presence of dust in the atmosphere, spilt liquids, etc.
What should I do if the burner flames are accidentally blown out?
If the burner flames are accidentally blown out, switch off the burner operating control knob and do not try to relight it for at least 1 minute.
How should I clean the appliance?
Once the appliance is cool, use a sponge to clean it with soap and water.
What are the recommended uses for a Wok burner?
The Wok burner is recommended for boiling, steaming, griddling, toasting, paellas, and Asian food (wok).
What are the recommended uses for a Rapid burner?
The Rapid burner is recommended for reheating and keeping things hot: cooked and pre-cooked dishes, escalopes, steaks, omelettes, frying, rice, white sauce, and ragout, and steaming fish and vegetables.
What are the recommended uses for a Semi-rapid burner?
The Semi-rapid burner is recommended for steaming potatoes, fresh vegetables, vegetable stews, and pasta. It’s also good for reheating, keeping things hot, and making tasty casseroles.
What are the recommended uses for an Auxiliary burner?
The Auxiliary burner is recommended for cooking casseroles, rice pudding, and caramel, defrosting and slow cooking vegetables, fruit and frozen products, and melting butter, chocolate, and jelly.
What is the minimum and maximum pan diameter for a Wok burner?
The minimum pan diameter for a Wok burner is 22 cm. The maximum pan diameter for a Wok burner is – cm. (Note: There is no maximum diameter listed in the PDF for this burner)
What is the minimum and maximum pan diameter for a Rapid burner?
The minimum pan diameter for a Rapid burner is 22 cm, and the maximum is 26 cm.
What is the minimum and maximum pan diameter for a Semi-rapid burner?
The minimum pan diameter for a Semi-rapid burner is 14 cm, and the maximum is 20 cm.
What is the minimum and maximum pan diameter for an Auxiliary burner?
The minimum pan diameter for an Auxiliary burner is 12 cm, and the maximum is 16 cm.
What type of pans should I use?
Do not use damaged pans, which do not sit evenly on the hob. Use pans with a thick, flat base.
Why should I cook with a lid?
Do not cook without using a lid, and make sure the lid is properly fitted, as this wastes energy.
Where should I place the pan on the burner?
Always center the pan over the burner, not to one side. Do not place large pans on the burners near the control knobs, as these may be damaged by the very high temperatures. Place the pans on the supports, never directly on the burner.
What should I make sure before using the appliance?
Make sure that the pan supports and burner cap are correctly positioned before using the appliance.
How should I place the pans on the hob?
Pans should be placed on the hob carefully. Do not strike the hob and do not place excessive weight on it.
Should I use steam cleaners to clean the hob?
Do not use steam cleaners as this could damage the hob.
How should I clean the stainless steel zones?
After each use, clean these areas with a product that is suitable for stainless steel. The cleaning product available from our Technical Assistance Service (code 464524) is recommended.
Where should I NOT use stainless steel cleaner?
The stainless steel cleaner must not be used in the area around the controls, as the symbols may be wiped off.
What should I do if there is a general electrical system malfunction?
Check the fuse in the main fuse box and change it if it is damaged. Also check the main control panel to see if the automatic safety switch or circuit breaker has tripped.
What should I do if the automatic switching on function does not work?
The space between the ignition sparker and the burner must be clean. Dry the burner caps carefully. Check that the burner caps are correctly positioned. If the problem persists contact the installation technician.
What should I do if the burner flame is not uniform?
Correctly place the parts on the appropriate burner and clean the grooves on the burner.
What should I do if the gas flow is not normal or there is no gas?
Open all gas taps. If the gas is supplied from a gas cylinder, check that it is not empty and change the gas cylinder if necessary.
What should I do if the kitchen smells of gas?
Turn off the taps and check that the coupling of the gas cylinder is sound. Shut off the gas supply, ventilate the premises and immediately notify an authorized installation technician to check and certify the installation. Do not use the appliance until ensuring that there is no gas leak in the installation or appliance itself.
What should I do if the burner immediately switches off after releasing the control knob?
Once the burner is on, hold the control knob down a few seconds longer and clean the grooves on the burner.
CLICK HERE TO DOWNLOAD BOSCH PGP6B (01) PDF MANUAL