BFN BFN-TW1018-IV (01) PDF MANUAL

BFN BFN-TW1018-IV (01) PDF SUMMARY:

What is the product overview of the BFN-TW1018-III/IV?

This easy-to-use BFN-TW1018-III/IV allows you to test both wrist straps and footwear to ensure EPA safety. It meets international standards, ensuring operator grounding safety. It uses an 8-bit MCU chip to independently test the foot and wrist bands, and an LCD screen displays test results and measured resistances. The test time is less than 1 second. It also combines turnstile and attendance functions to reduce factory costs and achieve intelligent automation.

---

What are the work environment requirements for the BFN-TW1018-III/IV?

The work environment should have a temperature between 0 and 50 degrees Celsius and relative humidity between 20% and 85%.

---

What are the features of the TW1018-III and TW1018-IV?

The TW1018-III (without voice) and TW1018-IV (with voice alarm) are testers for ESD, turnstile, and attendance. There are three equip points (left shoe, right shoe, and wrist strap) for completing the ESD test. The LCD displays resistance, with a range of 0.75 MO to 99.99 MO for both shoes and wrist straps. If the resistance is lower than 0.75 MO, “LO” will be displayed. If shoe resistance is higher than 100 MO, “HI” will be displayed. If wrist strap resistance is higher than 9.999 MO, “HI” will be displayed.

---

What are some of the functions of the device?

The device has an alarm function and can convert automation. After all tests pass, a signal is output to a turnstile, air shower, or other electrical key. There are two models: Employee and Client. The Employee model, with an ID/IC swipe, displays the name, card number, date, and time, and has different test models: A: swipe test wrist strap and shoes resistance ok, then the door opens; B: swipe test shoes pass, then the door opens; C: swipe test wrist strap pass, then the door opens; D: swipe test, push the button, then the door opens. The Client model only tests the wrist strap and shoe resistance, and if passed the door opens. The software can store 10,000 ESD test data records.

---

What kind of data can be stored and managed by the software?

The software can store ESD test data for 10,000 records. You can lead personal files and download name, card number, and ESD model information to the tester (allowing 10,000 records to be registered). The system collects swipe time, card number, and ESD test records and deletes ESD equipment records. The SQL Server background data management system allows sorting, inquiry with support software, and storage as Excel files for composing and printing reports.

---

What are the capabilities of the support software?

The support software can control 200 sets of TW1018-III/IV working simultaneously, and it features automatic software updates. Customers can customize IC or ID cards, and use options such as laser bar code reading or fingerprint check-in. The software can calibrate the ESD tester’s time and date and monitor the status of other devices. It also allows users to change the equipment number, software title, and window color. With 485 computer communication, the communication distance can reach 1200 meters, and multiple computers can manage a shared database.

---

What is the voice function of the TW1018-IV?

The TW1018-IV’s voice function is customizable, and the voice can be adjusted or powered off.

---

What are the specifications of the BFN-TW1018-III/IV?

The device operates with a working voltage of DC 9V-12V and a working current of less than 500mA. The test time is less than 1 second with a test accumulation of ±10-20%. The test range for footwear is 750KO-100MO for both the left and right shoe. The test range for the wrist strap is 750KO-10MO. The device is gray, made of ABS plastic, and has dimensions of W165mm x L97mm x H40mm. The foot plate is made of stainless steel with dimensions of W460mm x L460mm x H450mm. The stand height is 1.15M. The gross weight is 323g (body), 2.5kgs (stand), and 4.5kgs (plate).

---

What are the specifications for the turnstile?

The turnstile has a NO. 304 stainless steel construction. It weighs about 70kg, and the max carriage weight of the brake lever is 80kg. The brake lever turns unidirectionally or bidirectionally. It is powered by a 12V/20W DC motor, with a gate time of 0.2 seconds. The appearance standard size is W280 x L1200 x H980 mm, and the brake length is 510mm. The brake length diving force is 3kg. The indication speed is about 30 people/minute. In emergencies, the rod automatically drops when the power is off. It has a high-brightness mold indication (only the arrow shines).

---

What are the components of the device, and where are they located?

The device includes an LCD screen, a card light, a pass light, and a communication light. It has a test bottom and a swipe area. The PDF also shows the appearance of the turnstile and the stand type.

---

What are the initial steps for setting up the device?

First, confirm the type and quantity of the components are the same as the packing list. Install the database software SQL Server 2000 on a computer system running Windows XP. Return to the login condition: 1. Make sure the equipment connections are correct. 2. Confirm if the 9D outlet is correct, choose online equipment that is powered on. 3. Ensure database information is correct. 4. Log into the ESD system software using the username “admin” and the password “11111”.

---

What are the steps for installing the standing instrument?

1. Locate the pedestal and the connection wire with banana clips on one end and eye bolts on the other.
2. Locate the platform and unscrew and remove the four screws on the underside of the platform.
3. Insert the wiring into the corresponding socket and ensure a good connection.
4. Use the two sets of screws to secure the host and the top of the scaffold plank.
5. Insert the power adapter and turn the switch on to use.

---

What are the steps for installing the wall-mounted type?

1. Insert the yellow board with screws on the right height of the wall or customer-specified location.
2. Fasten the host’s metal buckles and the metal buckles on the yellow plate.
3. Put the host line and the pedal line on the correct connections.
4. Insert the power adapter and turn the switch on.

---

What are the steps for installing the turnstile?

1. The host and the free roller gate are inserted before leaving the factory.
2. Use the distribution of the RJ11 linking line.
3. Insert the power adapter and turn the switch on.

---

How do you import personnel data into the system?

Click the button labeled “introduction to Excel documents” and load the personnel table Excel documents into the software root. The personnel table needs to be designed by the customers in the required form. Import the personnel files into the database, and then you can click the department information and check the staff’s information. You can also edit, increase, amend, and delete information, but the name and card number cannot be empty.

---

What information is displayed on the staff management interface? The staff management interface shows department information, card number, left shoe, right shoe, wrist strap, date and time, and work number.

---

What must be noted when adding staff information to the system?

The same card number cannot be modified or added again

---

What are the interface components for time and date editing?

The interface shows the date and time settings, and a “confirm” button.

---

What is shown on the mass download registered information interface?

The interface contains options for searching, a “read record” button, a “clear” button, and a “stop/run” button. The interface also shows a table with headers for card number, left shoe, right shoe, wrist strap, date and time, and operation.

---

What does the solid hour read display? The solid hour reads displays the wrist, left foot, right foot results, and also includes an output field, and fields for number, work number, “delete data,” “add,” “change,” “delete,” and “standby.”

---

What information is available when reading or deleting ESD records?

The interface shows a table containing: Department, card number, left shoe, right shoe, wrist strap, date and time, number, status, and work number.

---

What is shown on the output excel interface?

The output excel interface shows options for printing preview of daily and monthly reports. It also clarifies that “pass” means free-testing, “HI” means over testing range, and “LO” means less than testing range.

---

What happens when card holders with registered ID/IC cards go through ESD testing?

Card holders with registered ID/IC cards will be ESD tested after power on. Non-registered cards will display “non-registered cards” and will trigger an alarm. The system will be in standby mode. When testing with registered cards, the name, card number, and record number will be displayed.

---

How should a user prepare for ESD testing?

Stand on the foot plate and connect the wrist strap. When you touch the metal plate, you will know whether the ESD tester is available. The ESD reading will be displayed. Once you remove your finger, it will display standby mode, and you should wait for the card sensor to display. The testing result is displayed. Gloves and fingernails should not touch the metal button. Hands should be kept away from the wrist strap cord and metal knob. The footplate should be kept clean. The shelf should be kept dry. Repairing or removing parts is forbidden.

---

What are the accessories that come with the BFN-TW1018-III/IV?

The accessories include a power supply, shelf installation screws (M845MM) for stand type, machine fix screws (M425MM) for stand type, a hang plate (for hang type), a foot plate, an operation manual, a warranty card, a disk for software, an RS232-RS485 converter, and a communication test wire.

---

What is included in the operation manual?

The operation manual is specifically for TW1018-III/IV users and includes information about the tester’s components, operation, and other related information. There may be slight differences between the operation and manual as the product may be upgraded with continuing stability.