FREE ENGLISH BEAUTIFUL 19030 (01) PDF USER GUIDE
FREE ENGLISH BEAUTIFUL 19030 (01) PDF USER MANUAL
FREE ENGLISH BEAUTIFUL 19030 (01) PDF OWNER GUIDE
FREE ENGLISH BEAUTIFUL 19030 (01) PDF OWNER MANUAL
FREE ENGLISH BEAUTIFUL 19030 (01) PDF REFERENCE GUIDE
FREE ENGLISH BEAUTIFUL 19030 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH BEAUTIFUL 19030 (01) PDF REFERENCE MANUAL
FREE ENGLISH BEAUTIFUL 19030 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH BEAUTIFUL 19030 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BEAUTIFUL 19030 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
BEAUTIFUL 19030 (01) PDF SUMMARY:
When using electrical appliances, what basic safety precautions should be followed?
When using electrical appliances, basic safety precautions should always be followed, including reading all instructions and protecting against the risk of electric shock by not putting the cord, plugs, or appliance in water or other liquid. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. The blender is not a toy, and children should be supervised to ensure they do not play with it. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning. A flashing light indicates when the blender is ready to operate; avoid inadvertent contact with the touchscreen, and avoid any contact with blades or moveable parts.
What should I do if the appliance has a damaged cord or plug, malfunctions, or has been damaged in any manner?
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or if it is dropped, or has been damaged in any manner. If the manufacturer has authorized service facilities, instruction to return the appliance to the nearest authorized service facility may be used instead of instructing the user to contact the manufacturer at the customer service phone number: 1-866-832-4843. Do not attempt to repair the unit yourself, as this will void the warranty.
What attachments are not recommended for use with the blender?
The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons.
Where should the blender be used?
Do not use outdoors.
What should I avoid doing with the cord?
Do not let the cord hang over the edge of the table or counter, and do not let the cord contact hot surfaces, including the stove.
How should I handle the blades?
Blades are sharp; handle carefully.
What type of liquids should I avoid blending?
Do not blend hot liquids.
When should I use the blender jar with the lid and measuring cap locked in place?
Never use the blender jar to process ingredients without the lid and measuring cap properly locked in place.
Can I place blender attachments into a microwave oven?
Never place any blender attachments into a microwave oven.
What precautions should I take while blending to avoid injury or damage?
Keep hands and utensils out of the jar while blending to reduce the risk of severe injury to persons or damage to the unit.
When can I use a scraper?
Always operate the Blender with its lid in place. A scraper may be used ONLY when the Blender is not running.
When should I add ingredients to the jar?
Never add ingredients to the jar while the Blender is operating.
What type of electrical outlet should the blender be plugged into?
The cord to this appliance should be plugged into a 3-prong 120V AC electrical outlet only.
What should I do if the appliance malfunctions during use?
If this appliance begins to malfunction during use, immediately press the power button or any illuminated SPEED or PRESET button to turn the Blender OFF, then unplug the cord. Do not use or attempt to repair the malfunctioning appliance. Contact Consumer Service at 1-866-832-4843.
What should I do if the appliance falls or becomes immersed in water?
If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use this appliance after it has fallen into or becomes immersed in water.
Where should I use the appliance?
To reduce the risk of injury to persons or property, never use this appliance in an unstable position.
What should the appliance be used for?
Do not use this appliance for other than its intended use.
When should I avoid using the jar?
Do not use if the jar is cracked or chipped.
How full should I fill the jar?
Do not overfill beyond the jar’s MAX line.
What should I ensure before pressing any button?
To avoid spills, make sure the lid is properly locked in place on the jar with the measuring cap in position before pressing any button.
What type of plug does this appliance have?
This appliance is equipped with a grounded-type 3-wire cord (3-prong plug).
What should I do if the plug does not fit the outlet?
If the plug should fail to fit the outlet, contact an electrician to replace the obsolete outlet. Do not attempt to defeat this safety feature.
Why does the appliance have a short power-supply cord?
A short power-supply cord (or detachable power-supply cord) is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
Can longer detachable power-supply cords or extension cords be used?
Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
What are the requirements if a long detachable power-supply cord or extension cord is used?
If a long detachable power-supply cord or extension cord is used:
- The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance.
- If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord.
- The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
How can I prevent plasticizers from migrating to the finish of the countertop or table top?
To prevent Plasticizers from migrating to the finish of the counter top or table top or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken; permanent blemishes may occur, or stains can appear.
What should I do if the electrical circuit is overloaded?
If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.
What are the parts of the High-Performance Blender?
The parts are:
- 2 oz. Measuring Cap
- Jar Lid
- 50 oz. Tritan™ Jar
- 4 Tip Stainless Steel Blade
- Motor Base with Soft Matte Premium Finish
- Touch-Activated Display Control Panel
- 3-Prong Plug (not shown)
- Cord Storage (not shown)
- Non-Skid Feet
What is the Touch-Activated Display Control Panel?
It’s a screen that only shows up when you need it. It has 3 SPEED buttons: LOW, HIGH, PULSE, as well as 4 PRESET blending functions: PUREE, LIQUIFY, ICE CRUSH, SMOOTHIE/CLEAN. These illuminate when active and disappear when not in use.
How do I know if the blender is plugged in?
When the Blender is plugged in, all buttons will illuminate, and a tone will sound; the power button will illuminate and then pulse slowly on and off.
What happens when the power button is pressed?
When the power button is pressed, a tone will sound, and the control panel will illuminate, and the power button will begin to flash.
How do I stop any operation?
Press the power button to STOP any operation.
When should I select the LOW speed?
Select LOW when a slower speed is required, to begin mixing, to prevent over-mixing, and when working with heavier batters.
How long will low speed blending run for?
LOW speed blending will automatically turn OFF after 60 seconds.
When should I select the HIGH speed?
Select HIGH to blend ingredients to the desired consistency when a faster speed is required.
How long will high speed blending run for?
HIGH speed blending will automatically turn OFF after 60 seconds.
When should I select PULSE?
Select PULSE to blend ingredients through controlled bursts of power. Use PULSE to dislodge ingredients clumped around the blade and at the bottom of the jar.
How does the PULSE function work?
PULSE is activated as the button is pressed. Release the PULSE button to turn the Blender OFF. For best results, time the pulses to ensure that blades come to a complete stop before pulsing again.
When should I use PUREE?
Use PUREE to prepare smooth soups and spreads, and to puree fruits and vegetables. All ingredients should be blended cold or at room temperature. Make sure sufficient liquid is added to create a smooth and even consistency. Add small amounts of stock, yogurt, milk, or water through the measuring cap until the desired consistency is achieved.
How long will the PUREE function run for?
PUREE has a preset cycle time and will automatically turn OFF after 60 seconds.
What is the LIQUIFY function ideal for?
Ideal for preparing soups and to blend thick or dense foods.
How does the LIQUIFY function operate?
When LIQUIFY is pressed, a tone will sound, the button will illuminate and the Blender will begin blending at lower speeds, then progressively increase to high speed.
How long will the LIQUIFY function run for?
LIQUIFY has a preset cycle time and will automatically turn OFF after 60 seconds.
What is the ICE CRUSH function used for?
ICE CRUSH quickly crushes up to 10 ice cubes and is perfect for preparing frozen drink recipes such as margaritas and daiquiris.
How long will the ICE CRUSH function run for?
ICE CRUSH has a preset cycle time and will automatically turn OFF after 26 seconds.
What is the SMOOTHIE/CLEAN function used for?
Blends fresh or frozen fruits and vegetables into the perfect smoothie.
How long will the SMOOTHIE/CLEAN function run for?
SMOOTHIE/CLEAN has a preset cycle time and will automatically turn OFF after 60 seconds.
How do I use the SMOOTHIE/CLEAN function to clean the blender jar?
To best automatically clean the Blender jar, first fill the jar with water to the 24 oz line and add a small amount of liquid dish soap. Press SMOOTHIE/CLEAN. The initial cleaning will continue for 60 seconds. Rinse the jar thoroughly with warm water. Repeat the procedure without soap. Add room temperature water to the blender jar MAX line. Press SMOOTHIE/CLEAN and run once again. Rinse well, then place the clean jar upside down on a rack to dry. Always clean the jar and blade immediately after use to prevent food from hardening.
Is the Tritan™ Jar dishwasher safe?
The Tritan™ Jar is top rack dishwasher safe.
What should I do before using the blender for the first time?
Carefully unpack the Blender and remove all packaging materials. Check the contents to ensure that all attachments (50 oz. jar, lid, and measuring cap) are present and have been received in good condition. Wash the jar, lid, and measuring cap in warm, soapy water before first use. Rinse thoroughly. Wipe the motor base with a damp cloth.
What warnings should I heed when handling the blender blades?
Do not touch the blade. Blending blades are very sharp. Use extreme care when handling, as failure to do so can result in personal injury.
Can I immerse the motor base in water?
DO NOT IMMERSE THE MOTOR BASE IN WATER.
What should I check before using the blender?
Always check to be sure the blade collar is properly fitted into the jar before use.
How do I assemble the jar?
- Always check to be sure the blade collar is properly fitted into the jar before use.
- To avoid spills, ensure that the lid is firmly secured to the jar.
- Press the lid down on the top portion of the jar until it rests firmly in place.
- Place the measuring cap into the center of the lid and twist clockwise to secure it safely in place.
- Use the measuring cap to measure and add ingredients before and while blending.
What should I note when adding ingredients to the jar?
When blending, foods or liquids tend to expand as they rise up the side of the jar. Do not fill the jar past its MAX line.
What warning should I heed while processing?
Pay close attention while processing. Never operate the Blender when the jar is empty.
How do I operate the blender?
- Place the motor base on a flat, clean, dry counter top or table.
- Plug the power cord into a 3-prong 120V AC electrical outlet. A tone will sound. The power button will illuminate and then pulse slowly on and off.
- Add ingredients to the jar. Never overfill the jar. To avoid personal injury, leakage, or damage to the Blender, make sure that ingredients do not surpass the MAX line. Place the jar securely onto the motor base.
- Make sure the measuring cap is in position in the lid.
- Add the lid onto the jar. Press to seal. Check before blending.
When adding smoothie ingredients to the jar, what is the correct order?
When adding Smoothie ingredients to the jar, add liquids and/or yogurt to the blender jar first. Then layer smaller chopped ingredients, both fresh and frozen. Larger chunks and ice should be added last. To avoid spinning blades and ensure a successful, creamy Smoothie, do not try to process too many frozen chunks.
What should I do before pressing any SPEED or PRESET buttons?
To avoid spills, make sure the lid is locked securely before pressing any SPEED or PRESET buttons.
What happens when the pulsing is pressed?
When the pulsing is pressed, a tone will sound as the control panel illuminates, the power button will flash and remains active for 20 seconds.
How do I begin blending?
Press the desired SPEED or PRESET button to begin blending. A tone will sound. The power button will illuminate, and the selected SPEED or PRESET will begin to flash. All other buttons will disappear when not in use. Press the desired SPEED or PRESET once more to activate the setting and begin blending.
What happens if no buttons are pressed in 20 seconds?
If no buttons are pressed in 20 seconds, the control panel will darken, and the power button will illuminate and begin to pulse.
What happens when using the PULSE function?
When using the PULSE function, the PULSE button will illuminate when pressed. When the button is released, the control panel will remain active for 20 seconds.
How do I stop blending when using HIGH or LOW SPEED?
When blending HIGH or LOW SPEED, press the power button to STOP blending when the desired consistency is reached.
How long does HIGH or LOW speed blending run?
HIGH or LOW speed blending will automatically turn OFF after 60 seconds.
How do I know when PUREE, LIQUIFY, ICE CRUSH, and SMOOTHIE/CLEAN cycles are complete?
PUREE, LIQUIFY, ICE CRUSH, SMOOTHIE/CLEAN times and speeds are PRESET and will STOP automatically when cycles are complete.
What should I do after processing food in the jar?
After processing food in the jar, pull the lid up and off the jar to remove. The spouted jar makes pouring easy. A small spatula is helpful for removing thicker processed foods.
What should I do when the blender is not in use?
Unplug the Blender when not in use and before cleaning.
What is the function selection guide for different ingredients/recipes?
| INGREDIENT/RECIPE | FUNCTION | DESCRIPTION |
|---|---|---|
| Pudding, Pie Filling, Custard | PULSE or LOW | Thick and creamy |
| Bread, Stale Bread, Crackers, Cookies (1/2 inch pcs, 1 cup batches) | PULSE or LOW | Coarse to fine crumbs |
| Nuts (shelled, 1/2 cup or less at a time) | PULSE or LOW | Coarse to fine chopped nuts, chopped nuts for baking |
| Nuts (shelled, 1/2 cup or less at a time Homemade Nut Flours, Meals, Nut Butter) | ICE CRUSH | Fine ground nut flours, nut meals Fresh preservative free nut butters |
| Mayonnaise, Salad Dressings, Salsas | LOW | Thick and creamy, blended, and emulsified |
| Pancake/Waffle Batter, Omelets | LOW | Light and fluffy |
| Cream, Egg Whites | HIGH | Thick and frothy |
| Milk Shakes | HIGH | Smooth and creamy |
| Smoothies, Drinks | SMOOTHIE | Smooth, thick & creamy and health drinks |
| Vegetable Puree | PUREE | Smooth and creamy |
| Crush Ice (up to 10 cubes) | ICE CRUSH | Coarse crush to snowy |
| Frozen Cocktails | ICE CRUSH | Thick and slushy |
| Dips, Appetizers | ICE CRUSH | Perfect for leafy recipes |
| Almond Milk, Coconut Milk, Soy Milk Oat Milk | LIQUIFY | Unfiltered for cooking. Filter for drinking. |
| Fresh Fruit Drinks | LIQUIFY | Thick and pulpy |
How do I interrupt blending?
To interrupt blending, press the power button or any illuminated SPEED or PRESET button to turn the Blender OFF.
What are some Beautiful Food Prep Tips?
- Use organic fruits and vegetables whenever possible.
- Wash all produce (even organic) thoroughly before removing peels and skins.
- Reduce the risk of bacteria contamination by using a wooden cutting board (not plastic).
- It is best practice to identify and use separate cutting boards for meats/fish/poultry and fruits/vegetables.
- Choose USDA Certified Organic:
- No additives, no sweeteners, no hydrogenated fats.
- No harmful pesticides.
- Organic farming produces fewer waste products and less pollution.
- Organic foods are arsenic-free.
- Higher quality ingredients for you and the entire family.
What maintenance does this appliance require?
This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician.
What should I do before cleaning the blender?
Always unplug the Blender before cleaning.
How should I clean the jar, lid, and measuring cap after processing?
Rinse the jar, lid, and measuring cap immediately after processing to prevent food from hardening and to make cleanup easier. It is not recommended to remove the blade from the jar. To clean the jar, fill with clean, warm water to the MAX line and add a small amount of liquid dish soap. Press SMOOTHIE/CLEAN. A tone will sound. Both the power button and SMOOTHIE/CLEAN will illuminate. All other buttons will disappear. Rinse out the jar’s contents with warm water. Repeat the procedure without soap. Add room temperature water to the blender jar and fill to the 24oz / 3 cup line. Press SMOOTHIE/CLEAN and run once again. Place the clean jar upside down on a rack to dry.
How should I clean the motor base?
Wipe the motor base with a damp cloth or sponge. Dry thoroughly.
How should I store the blender?
- Unplug and clean unit.
- Store in original box or in a clean, dry place.
- Never store the Blender while it is hot or plugged in.
- Never wrap the cord tightly around the appliance. Never place any stress on the cord, especially where the cord enters the motor base, as this could cause the cord to fray and break.
What should I do if the blender motor rotates very slowly?
The jar may be overloaded. Remove some food from the jar and continue blending. Ensure that ingredients do not surpass the max line. Add liquid to the jar and continue blending.
What should I do if the ingredients are not mixing together well?
Heavier ingredients may have fallen to the bottom. If necessary, remove the jar and shake ingredients to re-distribute. Continue blending. If the puree is still not blended smoothly, it may be necessary to add liquid to the jar and continue blending.
What should I do if the blender has stopped operating?
The motor may be overloaded and stopped functioning to prevent damage. The blender has resettable thermal protection. Unplug the unit and let it cool for 25 minutes. Reduce the load of the jar and clear any jams. Commence operation again as indicated in the operation section.
What should I do if the jar is leaking from the blade area?
The blade base may be loose. Turn the blade base located below the jar clockwise to tighten.
What does the Limited Two-Year Warranty cover?
Sensio Inc. dba Made by Gather™ warrants that for TWO YEARS from the date of purchase, this product will be free from mechanical defects in material and workmanship, and for 90 days in respect to non-mechanical parts. At its sole discretion, Sensio Inc. dba Made by Gather™ will either repair or replace the product found to be defective, or issue a refund on the product during the warranty period.
Who is the warranty valid for?
The warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.
What does the warranty not cover?
The warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified Sensio Inc. dba Made by Gather™ personnel. Also, the warranty does not cover Acts of God such as fire, floods, hurricanes, or tornadoes.
What is Sensio Inc. dba Made by Gather™ not liable for?
Sensio Inc. dba Made by Gather™ shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply. The warranty covers specific legal rights which may vary by state, province, and/or jurisdiction.
How do I obtain warranty service?
Contact Customer Service at 1-877-775-3564. A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to Sensio Inc. dba Made by Gather™. Attach a tag to the product that includes your name, address, daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. Sensio Inc. dba Made by Gather™ shall bear no responsibility or liability for the returned product while in transit to Sensio Inc. DBA Made by Gather™ Customer Service Center.
CLICK HERE TO DOWNLOAD BEAUTIFUL 19030 (01) PDF MANUAL