BAUHN ATAKMC2-0525-W-B (01) PDF MANUAL

Unpack the box and make sure all of these items are there:

A. Travel Adaptor with Wireless Charging

B. Australia Adaptor

C. America/Asia Adaptor

D. UK/Hong Kong Adaptor

E. Asia/Europe Adaptor

F. Drawstring Bag

G. User Guide

H. Warranty Certificate

I. General Safety Warnings

This powerboard allows you to interchange adaptor plugs for different countries, so you can use your Australian appliances wherever you travel.

1. Select the correct adaptor for the country or continent you are visiting. Connect adaptor to the built-in adaptor plug of the powerboard (as shown by the black arrow in the picture). Then, plug it into the wall outlet.

2. Plug in your Australian appliance or device to the plug socket or USB port on the powerboard. You can power multiple items simultaneously if you need.

3. You can now use your Australian appliances or devices.

The green light of the surge protection LED indicates that the power socket is surge protected.

Place your phone on the built-in wireless charging pad.

This product must only be used with low wattage devices not exceeding 2400W. For using the device at 110V country not exceeding 1100W.

Some countries use more than one type of plug. Check each area before you travel.

This adaptor kit does not convert voltage or mains frequency (50Hz, 60Hz). Check the supply voltage/frequency and the voltage/frequency required by your appliance. If they differ, an appropriate transformer must be used.

• Make sure the plug is firmly connected to the wall socket.

• Check if the wall socket has power output.

• Try other adaptor plugs to see if they work.

• The total power output of USB/USB-C ports is limited to 3.1A and some devices require a high amount of charging power. If you connect multiple devices to the USB/USB-C ports, it may slow down the charging speed. Try disconnecting some devices and only charge one or two devices at the same time.

• Make sure the USB/USB-C cable is firmly plugged into the USB/USB-C port.

• Some USB/USB-C cables have limited charging power; try a different USB/USB-C cable to see if it improves.

• Check if the powerboard is correctly connected to the mains input.

• Make sure the USB/USB-C cable is firmly plugged into the USB/USB-C port.

• Try other USB/USB-C ports.

• Try using a different USB/USB-C cable.

• Check that your smart phone supports wireless charging.

• If you have a smart phone case, you must remove when charging.

• Ensure your smart phone is facing up and aligned to the centre of the wireless charging pad, and remove any metal or other objects between the smart phone and the wireless charging pad.

The packaging of your product has been selected from environmentally friendly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach and are safely disposed of. Please ensure they are offered for recycling rather than throwing these materials away.

At the end of its working life, do not throw this product out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled. Contact your local authority for your nearest recycling centre. Electrical and electronic items contain materials and substances which, if handled or disposed of incorrectly, could be hazardous to the environment and human health.