Free English AUDIO-TECHNICA AT-LP70XBT (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD AUDIO-TECHNICA AT-LP70XBT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I set the platter for the AUDIO-TECHNICA AT-LP70XBT?
Place the platter onto the center spindle of the AUDIO-TECHNICA AT-LP70XBT.
How do I attach the drive belt to the AUDIO-TECHNICA AT-LP70XBT?
After placing the platter, attach the drive belt to the brass-colored motor pulley of the AUDIO-TECHNICA AT-LP70XBT.
What should I do after installing the drive belt on the AUDIO-TECHNICA AT-LP70XBT?
Once the belt is attached, remove the red ribbon from the drive belt of the AUDIO-TECHNICA AT-LP70XBT.
How do I install the felt mat on the AUDIO-TECHNICA AT-LP70XBT?
Simply place the felt mat on top of the platter of the AUDIO-TECHNICA AT-LP70XBT.
What is the requirement for the surface where the AUDIO-TECHNICA AT-LP70XBT is placed?
You must mount the AUDIO-TECHNICA AT-LP70XBT on a level surface to ensure proper operation.
How do I connect the AUDIO-TECHNICA AT-LP70XBT to a device with a PHONO input?
Set the pre-amplifier selector switch on the AUDIO-TECHNICA AT-LP70XBT to PHONO. Connect the RCA audio cable to the PHONO input jacks on your amplifier or speaker.
How do I connect the AUDIO-TECHNICA AT-LP70XBT to a device without a PHONO input?
Set the pre-amplifier selector switch on the AUDIO-TECHNICA AT-LP70XBT to LINE. Connect the RCA audio cable to the LINE/AUX input jacks on your amplifier or speaker.
How do I pair Bluetooth headphones or speakers with the AUDIO-TECHNICA AT-LP70XBT?
Set your Bluetooth device to pairing mode, then press and hold the wireless function button on the AUDIO-TECHNICA AT-LP70XBT. The indicator will light in blue when the pairing is complete.
How do I prepare the tonearm for play on the AUDIO-TECHNICA AT-LP70XBT?
Remove the cartridge’s protector and remove the clamp of the tonearm rest on the AUDIO-TECHNICA AT-LP70XBT.
How do I play a 33-1/3 RPM record on the AUDIO-TECHNICA AT-LP70XBT?
Place the record on the felt mat, set the AUDIO-TECHNICA AT-LP70XBT record size, and press the SPEED button to select 33.
How do I play a 45 RPM record on the AUDIO-TECHNICA AT-LP70XBT?
Place the 45 RPM adapter on the center spindle, place the record on top, and press the SPEED button to select 45 on the AUDIO-TECHNICA AT-LP70XBT.
How do I start automatic playback on the AUDIO-TECHNICA AT-LP70XBT?
After selecting the speed and record size, press the START button on the AUDIO-TECHNICA AT-LP70XBT.
How do I perform manual playback on the AUDIO-TECHNICA AT-LP70XBT?
Lift the tonearm lift control lever to the UP position, position the tonearm over the desired groove, and move the lever to the DOWN position on the AUDIO-TECHNICA AT-LP70XBT.
How do I stop playback on the AUDIO-TECHNICA AT-LP70XBT?
If using a wired connection, lower the volume of your device first, then press the STOP button on the AUDIO-TECHNICA AT-LP70XBT. Ensure the tonearm returns to the rest and secure the clamp.
How do I remove the stylus from the AUDIO-TECHNICA AT-LP70XBT?
With the cartridge protector attached, pull the stylus in the direction of the arrow to remove it from the AUDIO-TECHNICA AT-LP70XBT cartridge.
How do I install a new stylus on the AUDIO-TECHNICA AT-LP70XBT?
Align the protrusion of the new replacement stylus and push it into place in the direction of the arrow on the AUDIO-TECHNICA AT-LP70XBT.
What is the proper maintenance for the AUDIO-TECHNICA AT-LP70XBT stylus?
Keep the stylus clean and avoid touching it with your fingers to ensure the best performance from your AUDIO-TECHNICA AT-LP70XBT.
What precautions should be taken before cleaning the AUDIO-TECHNICA AT-LP70XBT?
Always unplug the AC adapter from the power outlet before cleaning the AUDIO-TECHNICA AT-LP70XBT.
Can I use the AUDIO-TECHNICA AT-LP70XBT without an external phono amplifier?
Yes, the AUDIO-TECHNICA AT-LP70XBT has a built-in phono equalizer. You can connect it directly to active speakers by setting the selector switch to LINE.
CLICK HERE TO DOWNLOAD AUDIO-TECHNICA AT-LP70XBT (01) PDF DOCUMENT