Click here to download AUDIO-TECHNICA ATH-S200BT (01) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** ATH -S200BT User Manual Wireless Headphones audio-technica

****** Page 2 ****** Introduction Thank you for purchasing this Audio-Technica product. Before using the product, please read through the Quick Start Guide and Caution Guide, as well as this user manual when necessary, to ensure that you will use the product correctly. Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product. Cautions for the product • Do not use the product near medical equipment. Radio waves may affect cardiac pacemakers and medical electronic equipment. Do not use the product inside medical facilities. • When using the product in aircraft, follow airline instructions. • Do not use the product near automatic control devices such as automatic doors and fire alarms. Radio waves may affect electronic equipment and cause accidents due to malfunction. • Do not disassemble, modify or attempt to repair the product to avoid electric shock. malfunction or tire. • Do not subject the product to strong impact to avoid electric shock, malfunction or fire. • Do not handle the product with wet hands to avoid electric shock or injury. • Disconnect the product from a device if the product begins to malfunction, producing smoke, odor, heat, unwanted noise or showing other signs of damage. In such a case, contact your local Audio-Technica dealer. • Do not allow the product to get wet to avoid electric shock or malfunction. • Do not put foreign matter such as combustible materials, metal, or liquid in the product, Do not cover the product with a cloth to avoid fire or injury by overheating. Follow applicable laws regarding mobile phone and headphone use if using headphones while driving. Do not use the product in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, and construction sites). • When charging, make sure to use the included USB charging cable. Do not charge with devices that have quick-charge functionality (with a voltage of 5 V or more). Doing so may cause the product to malfunction. • To prevent damage to your hearing, do not raise the volume too high. Listening to loud sound for an extended period may cause temporary or permanent hearing loss. Discontinue use if skin irritation results from direct contact • with the product. Do not catch your fingers or other body parts between the housing and the arm or inside the joints. 1

****** Page 3 ****** Safety precautions Cautions for rechargeable battery The product is equipped with a rechargeable battery (lithium polymer battery). • If battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately. • If battery fluid leaks, do not touch fluid with bare hands. If fluid remains inside the product, it may cause malfunction. If battery fluid leaks. contact your local Audio-Technica dealer — If fluid gets in your mouth, gargle thoroughly with clean water such as tap water and consult a doctor immediately. — If your skin or clothing comes in contact with fluid, immediately wash the affected skin or clothing with water If you experience skin irritation, consult a doctor. • To avoid leakage, generation of heat or explosion: Never heat, disassemble or modify the battew, nor dispose of it in a fire. Do not attempt to pierce with a nail, hit with a hammer or step on the battepq. Do not drop the product or subject it to strong impact. Do not get the battery wet. For customers in the USA FCC Notice Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/lV technician for help. 2 • Do not use, leave or store the battery in the following places: — Area exposed to direct sunlight or high temperatures and humidity — Inside of a car under the blazing sun — Near heat sources such as heat registers • Charge only with the included USB cable to avoid malfunction or fire. • The internal rechargeable battery of this product cannot be replaced by the usel The battery may have reached the end of its service life if the usage time becomes significantly shorter even after the battepq has been fully charged. If this is the case, the battery needs to be repaired. Contact your local Audio-Technica dealer for repair details. • When the product is disposed of, the built-in rechargeable battery needs to be discarded properly. Contact your local Audio-Technica dealer to learn how to properly dispose of the battery. RF Exposure Statement This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter used in other systems. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). For customers in Canada IC statement CAN ICES-3 This device complies with INDUSTRY CANADA R.S.S. 247. Operation is subject to the following conditions: (I) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment.

****** Page 4 ****** Notes on use • Be sure to read the connected device’s user manual before use. • Audio-Technica will not be liable in any way Tor any loss of data in the unlikely event that such losses should occur while using the product. • On public transportation or in other public places, keep the volume low so as not to disturb other people. • Minimize the volume on your device before connecting the product. • When using the product in a dry environment, you may feel a tingling sensation in your ears. This is caused by static electricity accumulated on your body, not by product malfunction. • Do not subject the product to strong impact. • Do not store the product in direct sunlight, near heating devices, or in hot, humid* or dusty places, Additionally, do not allow the product to get wet. • When the product is used for a long time, the product may become discolored due to ultraviolet light (especially direct sunlight) and wear. • Make sure to hold the plug when connecting and disconnecting the included cable or USB charging cable. The included cable or USB charging cable may become severed or an accident may occur if you pull on the cable itself. • When you are not using the included cable or USB charging cable. disconnect it from the product. It the product is placed in a bag while the included cable or USB charging cable is still connected, the included cable or USB charging cable may become caught, severed* or broken. • This product can be used to talk on the phone only when using a mobile telephone network. Support for telephony apps that use a mobile data network is not guaranteed. If you use the product near an electronic device or transmitter • (such as a mobile phone) which is not connected with the product, unwanted noise may be heard. In this caser move the product away from the electronic device or transmitter. If you use the product near a IV or radio antenna, noise may be seen or heard in the television or radio signal. In this case. move the product away from the IV or radio antenna. • To protect the built-in rechargeable battery charge it at least once every 6 months, If too much time passes between charges, the life of the rechargeable battery may be reduced* or the rechargeable battery may no longer be able to be charged. For a more comfortable Bluetooth@ communication experience The effective communication range of this product varies depending on obstructions and radio wave conditions. For a more enjoyable experience, please use the product as close as possible to the Bluetooth device. To minimize noise and sound disruptions, avoid placing your body or other obstacles between the product’s antenna (L side) and the Bluetooth device. 3 — Antenna

****** Page 5 ****** Part names and functions The left bushing has a protrusion for distinguishing between the left and right. Left/right (UR) indicator Earpad 1 Housing A microphone is built into the left (L) Headband housing. Power switch Turns the power on and off. o Battery jack Used to connect the included USB charging cable and charge the product. Indicator lamp Displays the operating status and battery level of the product. Control button Used to play/pause music and answer/ end phone calls. Volume buttons Adjust the volume using and 4 Slider Joint Arm Accessories • USB charging cable (30 cm (12″))

****** Page 6 ****** Charging the battery • Fully charge the battery when using for the first time. • When the rechargeable battery is running low, the product will sound 2 sets of 2 beeps through the headphones, and an indicator lamp will flash in red. When these beeps sound, charge the battery. • It takes about 4 hours to charge the battery fully. (This time may vary depending on usage conditions.) • While the battery is charging, the product’s Bluetooth connection remains disabled and therefore the product cannot be used. 1. 2. 3. 4. Connect the included USB charging cable (micro USB Type B side) to the battery jack. e The included USB charging cable is designed for exclusive use with the product. Do not use other cables to charge the product. • When inserting the USB charging cable into the USB port or battery jack, check that the jack is facing in the correct direction before inserting it directly (horizontally). Battery jack Computer USB port USB Type A USB charging cable (included) Micro USB Type B Connect the included USB charging cable (USB Type A side) to the computer to start charging. • During charging, the indicator lamp lights as follows: * Lit in red: When charging Lit in blue: Charging complete * It may take several seconds for the indicator lamp to light. When charging is complete, disconnect the USB charging cable (USB Type A side) from the computer. Disconnect the USB charging cable (Micro USB Type B) from the battery jack. 5

****** Page 7 ****** Connecting via Bluetooth wireless technology About pairing To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are paired, you do not need to pair them again. However, you will need to pair again in the following cases: • If tho product is deleted from the Bluetooth device’s connection history. • If the product is sent out for repair. • If nine or more devices are paired. (This product can save the pairing information of up to eight devices. If you attempt to pair a new device when eight devices have already been paired, the pairing information of the new device will overwrite the information of the device within the eight paired devices that has the oldest date and time for connection to the product.) Pairing a Bluetooth device • Read the user manual for the Bluetooth device. • Place the device within 1 m (3.3) of the product to perform pairing correctly. • To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the confirmation tone. 1. 2. 3. Starting with the product turned off, slide the power switch to the “ON” position. • The indicator lamp will light in purple, and then flash in red and blue, Use your Bluetooth device to begin the pairing process and search for the product. When your Bluetooth device finds the product, “ATH-S200BT” will be displayed on the device. • For information about using your Bluetooth device, refer to the device’s user manual. Select “ATH-S200BT’i to pair tho product and your Bluetooth device. • Some devices may ask for a passkey. In this caser enter “0000”. The passkey may also be called a passcode, PIN code, PIN number, or password. • The product sounds a confirmation tone when pairing is complete. 6 Bluetooth ATHS200UT

****** Page 8 ****** Using the product The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of those purposes suits your needs. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices. Power supply ON/OFF Power Power switch operation supply ON OFF I CD o It may take several seconds for the indicator lamp to light. ‘2 For details, please refer to “Indicator lamp display” (p. 11). Wearing the product Place the side of the product marked “L” (LEFT) on the left ear and the side marked i’Ri’ (RIGHT) on tho right ear, and then adjust the headband by sliding the slider up and down until the earpads cover your ears. Swivel mechanism You can fold the housing so that it lies flat. Indicator lamp Lights in purple, then flashes in red and Lights in purple, then turns off*2 • The swivel mechanism cannot rotate more than 90 degrees. Do not apply excessive force to this mechanism. Joint “R” (RIGHT) side “L” (LEFT) side In this image, the headphones are folded down so they are flat. 7

****** Page 9 ****** Using the product Listening to audio • To connect for the first time, pair the product and your device via Bluetooth wireless technology. If you have already paired the product and your Bluetooth device, turn on tho Bluetooth device’s Bluetooth connection and turn on the product. • Use your Bluetooth device to start playback, referring to the device’s user manual as necessary. Control button Press Press and hold Play/pause Plays or pauses music and video playback.*l The speech recognition function (such as Siri, which is installed on iOS devices) may start depending on the connected device. Volume buttons Press + button Press and hold (for about 2 seconds) Press button Press and hold (for about 2 seconds) Volume up Skip forward Volume down Skip back Increases the volume by 1 level.*2 Plays the next track.*l Decreases the volume by I level” Plays the previous track.*t *I Some controls may not be available for music and video playback on some smartphones. *2 A confirmation tone is heard each time you press the button. A low beep is heard when the volume is at the maximum or minimum level. The volume control of some devices may not work well with the product. 8

****** Page 10 ****** Using the product Talking on the phone • If your Bluetooth device supports telephone features, you can use this product’s built-in microphone to talk on the phone. • When your Bluetooth device receives a phone call, the product sounds a ring tone. • If a call is received while you are listening to music, music playback is paused. When you finish the call, music playback resumes.*l When Receiving a call Talking on a call Operation Press the control button. Press and hold the control button (for about 2 seconds). Press the control button. Press and hold the control button (for about 2 seconds).’2 Press a volume button (+ or Function Answers the call. Rejects tho call. Ends the call. Each time you press and hold tho button (about 2 seconds), you switch the call to your mobile phone or to the product. Y Adjusts the volume (+ or of the call. *I Depending on your Bluetooth device, music playback may not resume. ‘2 When you hear a confirmation tone. release the control button. • The phone call controls explained above may not be available on some smartphones. Auto power off function The product automatically turns off after 5 minutes of not being connected to a device that has its power turned on. Reset function If the product does not work or other malfunctions occur, refer to “Charging the battery” (p. 5) and connect the USB charging cable. Make sure tho cable is carrying power. Disconnecting and then reconnecting the USB charging cable will reset the product and should resolve any problem you are experiencing. If the problem persists, please contact your local Audio-Technica dealer. Resetting the product does not change any of your settings (pairing information, volume setting, etc.). 9 Battery jack Micro USB Type-B

****** Page 11 ****** Troubleshooting Problem Power is not supplied. Unable to pair. No sound is heard / Sound is faint. Sound is distorted / Noise is heard / Sound cuts out. Cannot hear the voice of the caller / Voice of the caller is too quiet. The product cannot be charged. Solution • Charge the product. • VISit our website for information on compatible models. • Confirm that the Bluetooth device communicates using Ver. 2.1 +EDR or higher. • Place the product and the Bluetooth device within 1 m (3.3) of each other. • Set the profiles for the Bluetooth device, For procedures on how to set profiles, refer to the Bluetooth device’s user manual. • Remove the pairing information for the Bluetooth device then pair the product with this device again. • Turn on the power of the product and the Bluetooth device. • Turn up the volume of the product and the Bluetooth device. • If the Bluetooth device is sot to tho HFP/HSP connection, switch to the A2DP connection. • Move away from obstacles between the product and the Bluetooth device, such as people, metal or walls, and place them closer together. • Switch the output of the Bluetooth device to the Bluetooth connection. • Turn down the volume of the product and the Bluetooth device. • Keep this product away from devices that emit radio waves such as microwaves and wireless routers. • Keep TVs, radios, and devices with built-in tuners away from the product. These devices can also be affected by the product. • Turn off the equalizer settings of the Bluetooth device. • Remove obstacles between the product and the Bluetooth device and place them closer together. • Turn on the power of the product and the Bluetooth device. • Turn up the volume of tho product and tho Bluetooth device. • If the Bluetooth device is set to the A2DP connection, switch to the HFP/HSP connection. • Switch the output of the Bluetooth device to the Bluetooth connection. • Securely connect the included USB charging cable and charge the product. • For details about how to operate your Bluetooth device. refer to the device’s user manual, • If the problem still remains, reset the product. To reset the product, refer to “Reset function” (p. 9). 10

****** Page 12 ****** Indicator lamp display The indicator lamp of the product indicates the product’s status as explained below. Status Pairing Connection Battery level Charge Indicator lamp display pattem Red e Blue ooeeeooeeeeoooe Searching for device Waiting to be connected Connecting Battery level low Charging Fully-charged Flashing Blue in the pairing or connection status turns red. Lit Lit II

****** Page 13 ****** Specifications Headphones Type Driver Sensitivity Frequency response Impedance Microphone Type Polar pattern Sensitivity Frequency response Communication specifications Communication system RF output Maximum communication range Frequency band Modulation method Compatible Bluetooth profiles Support codec Supported content protection method Transmission band Other Power supply Charging time Operating time Weight Operating temperature Accessories Sold separately Closed-back dynamic 40 mm 102 dB/mW 5 to 32,000 Hz 32 ohms Electret condenser Omnidirectional 40 dB (1 V/Pa, at 1 kHz) 50 to 15,000 Hz Bluetooth version 4. I mw EIRP Line of sight – approx. 10 m (33′) 2.402 GHz to 2.480 GHz FHSS A2DP, AVRCP, HFB HSP SBC SCMS-T 20 to 20,000 Hz DC 3.7 V lithium polymer battery Approx. 4 hours* Continuous transmission time (music playback): Max. approx. 40 hours* Continuous standby time: Max. approx. 1000 hours* 190 g (6.7 oz) 50C to aooc (410 F to 1040F) • USB charging cable (30 cm (12′) USB Type A / Micro USB Type B} • Earpad * The above figures depend on operating conditions. For product improvement, the product is subject to modification without notice. • The Bluetoothö word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. All other trademarks are property of their respective owners. 12

****** Page 14 ****** Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan @2017 Audio-Technica Corporation Global Support Contact: 1324162204)2-01 ver-1 2017,10.15








Leave a comment, question, review or page error below.

This site uses Akismet to reduce spam. Learn how your comment data is processed.