Click here to download ATEN VE-RMK1U (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** ATEN Video Extender Rack Mount Kit VE-RMKIU Installation Guide vwm.aten.com

****** Page 2 ****** VE-RMKIU Installation Guide User Information Online Registration Be sure to register your product at our online support center: International eservice.aten.com Telephone Support For telephone support, call this number: International China Japan Korea North America User Notice 886-2-8692-6959 86-400-810-0-810 81-3-5615-5811 82-2-467-6789 1-888-999-ATEN ext 4988 All information, documentation, and specifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or wananties, either expressed or implied, with respect to the contents hereof and specifically disclaims any wan-anties as to merchantability or fitness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software. The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is the responsibility of the user to correct such interference. The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

****** Page 3 ****** VE-RMKIU Installation Guide Package Contents • • 1 VE-RMKIU Frame 4 IU Mounting Plates 5 Plastic Captive Screws 6 Hexagon Head Screws 12 Countersunk Head Screws Note: Check to make sure that all the package contents are present and that nothing is damaged in shippmg. If you encounter any problems, contact your local sales representative for more information. Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit or any connected devices. ATEN regularly updates its product documentation for new features and fixes. For an up-to-date VE-RNIKIIJ documentation, visit aten.com/global/en/ Product Information For information about all ATEN products and how they can help you connect without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and telephone numbers: International North America aten.com vmw.aten-usa.com C Copyright 2019 ATEN@ International co., Ltd. Manual Date: 2019-04-12 ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other brand names and trademarks are the registered property of their respective owners.

****** Page 4 ****** VE-RMKIU Installation Guide Contents User Infonnation Package Contents Product Information Contents.. Installation Technical Support Limited Warranty . ii Ili ili 1 11 12

****** Page 5 ****** Installation l. Different ATEN devices use different sets of screw holes on the mounting plate to install. Use the table below to find out: • Whether if your ATEN device is built-in with rack ears • The alignment line that your ATEN device uses VE601, VE801, VE811, VE901 Mounting Plate Category CE CE cs vs CE CN cs vc VE vs Models Not Equipæed with CEIOO VE560, VE600A, VE602, VE800A, VE803, VE810 VE150A VE170, VE172R, VB802 CE250A, CE611, CE700A CS72D, CS72E KE6900ST VE812, VE814, VE882, VE892 VS182A VS182B, vs192, vs194 UC2322, UC2324, UC4852, UC4854 CE350, CE370, CE600, CE602, CE604 CE610A, CE620, CE624 CE750, CE750A, CE770, CE800B, CE820, CE920 CN8000, CN8000A CS724KM, CS74D, CS74E KE8900S, KE9900ST VC880 VE300, VE500, VE813A VS184B, VS481A, VS481B, vs481C EauiP%daXith VE1812,VE2812T, VE802, VE814A, VE8900, VE8950 VE1832, VE816R, VE883 Alianment Line Line A Line B Line C Line C Max. No. of Units 4 units 3 units 2 units 1

****** Page 6 ****** VE-RMKIU User Manual 2. 3. 2 To install a device that is equipped with rack ears, go to the next step. To install a device that is not equipped with rack ears, go to step 4 (page 5). Follow the steps below to rack mount a device that has rack ears. a) Align the device to its alignment line in the illustrated orientation, and latch one of the rack ears onto the protruded dot on the mounting plate. Mounting Plate O c O o o o O 0 Example: VE802 installed on a mounting plate Protruded dot c b) Secure the device to the mounting plate using the supplied hexagon head screw. Hexagon Head Screws c

****** Page 7 ****** VE-RMKIU User Manual c) Position the VE-RNIKIIJ frame on the front of your rack, align the holes in the frame with the holes m the rack, and then secure the frame to the rack with self-prepared screws. d) Align your device and mounting plate assembly to one of the slots on the VE-RMKI U Frame. 2 units 3 units 4 units 4 u n its 4 units VE-RMK IU Frame 2 units 3 units 3

****** Page 8 ****** VE-RMKIU User Manual e) Secure the mountmg plate to the frame with a plastic captive screw provided in the package. Plastic Captive Screw Note: The maxnnum number of units that a VE-RMKI U Frame supports may vary across models. Refer to the table in step I for details. If you have any VE8900/8950 devices installed on the mounting plate, make sure to leave at least 2 mm of space above the devices to avoid scratching the buttons on the top panel, or leave IU of space if you wish to access these buttons. 4

****** Page 9 ****** 4. VE-RMKIU User Manual Follow the steps below to rack mount a device that does not have rack ears. Example 1: A device that aligns to line A or B a) Align the device to Ime A or B in the illustrated orientation. Mounting Plate Example: VB802 installed on a mounting plate b) Secure the device to the mounting plate from the backside using the supplied countersunk head screws.

****** Page 10 ****** VE-RMKIU User Manual c) Position the VE-RMKIU frame on the front ofyour rack, align the holes in the frame with the holes in the rack, and then secure the frame to the rack with self-prepared screws. d) Align your device and mounting plate assembly to one of the slots on the VE-RMKIU Frame. 2 units 3 units 2 units 3 units VE-RMK IU Frame 6

****** Page 11 ****** VE-RMKIU User Manual e) Secure the mounting plate to the frame with a plastic captive screw provided in the package. For a device that aligns to line A, you can install up to 4 units: Plastic Captive Screw For a device that aligns to line B, you can install up to 3 units: 7

****** Page 12 ****** VE-RMKIU User Manual Example 2: A device that uses line C a) Align the device to its alignment line in the illustrated orientation. Mounting Plate o c o O O Example: CE610A Front View Top View 0 0 CE610A Mounting Plate Mounting Plate CE610A -c b) Secure the device to the mounting plate from the backside using the supplied countersunk head screws. Countersunk Head Screws 8

****** Page 13 ****** VE-RMKIU User Manual c) Position the VE-RNIKIIJ frame on the front of your rack, align the holes in the frame with the holes m the rack, and then secure the frame to the rack with self-prepared screws. d) Align your device and mounting plate assembly to one of the slots on the VE-RMKIU Frame. 2 units 3 units 2 units 3 units 4 units 4 4 units VE-RMK IU Frame 9

****** Page 14 ****** VE-RMKIU User Manual e) Secure the mountmg plate to the frame with a plastic captive screw provided in the package. Plastic Captive Screw Note: The maximum number of units that a VE-RMKIU Frame supports may vary across models. Refer to the table in step 1 for details. 10

****** Page 15 ****** VE-RMKIU User Manual Technical Support International For online technical support — including troubleshooting, documentation, and software updates: support.aten.com For telephone support, call this number: International China Japan Korea North America North America 886-2-8692-6959 86-400-810-0-810 81-3-5615-5811 82-2-467-6789 1-888-999-ATEN ext 4988 support@aten-usa.com Email Support Online Technical Support Telephone Support Troubleshooting Documentation Software Updates aten-usa.com/support 1-888-999-ATEN ext 4988 When you contact us, please have the following information ready beforehand: Product model number, serial number, and date of purchase Your computer configuration, including operating system, revision level, expansion cards, and software Any error messages displayed at the time the error occurred The sequence of operations that led up to the error Any other information you feel may be of help 11

****** Page 16 ****** VE-RMKIU User Manual Limited Warranty ATEN warrants its hardware in the country of purchase against flaws in materials and workmanship for a Warranty Period of two [2] years (warranty period may vary in certain regions/countries) commencing on the date of original purchase. This warranty period includes the LCD panel of ATEN LCD KVM switches. Select products are warranted for an additional year (see A+ Warranty for further details). Cables and accessories are not covered by the Standard Warranty. What is covered by the Limited Hardware Warranty ATEN will provide a repair service, without charge, during the Warranty Period. If a product is detective, ATEN will, at its discretion, have the option to (1 ) repair said product with new or repaired components, or (2) replace the entire product with an identical product or with a similar product which fulfills the same function as the defective product. Replaced products assume the warranty of the original product for the remaining period or a period of 90 days, whichever is longer. When the products or components are replaced, the replacing articles shall become customer property and the replaced articles shall become the property of ATEN. To learn more about our warranty policies, please visit our website: aten.com/global/en/legal/policies/warranty-policy 12

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL



ATEN VE-RMK1U (01) PDF MANUAL

Leave a comment, question, review or page error below.

This site uses Akismet to reduce spam. Learn how your comment data is processed.