Free English APPLE WATCH SERIES SE 2ND GENERATION (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD APPLE WATCH SERIES SE 2ND GENERATION (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the basic gestures to interact with my APPLE WATCH SERIES SE 2ND GENERATION?
In addition to using the Digital Crown and side button, you can use these basic gestures to interact with your APPLE WATCH SERIES SE 2ND GENERATION:
• Tap: Touch one finger lightly on the screen.
• Swipe: Move one finger across the screen—up, down, left, or right.
• Drag: Move one finger across the screen without lifting.
What do I need to set up and pair my APPLE WATCH SERIES SE 2ND GENERATION with an iPhone?
To use your APPLE WATCH SERIES SE 2ND GENERATION (Series 4 or later) with watchOS 10, you need to pair it with an iPhone Xs or later with iOS 17 or later.
Before you begin:
• Update your iPhone to the latest version of iOS. Open the Settings app on your iPhone, tap General, then tap Software Update.
• Make sure that your iPhone has Bluetooth turned on, and it’s connected to Wi-Fi or a cellular network. To check, swipe down from the top-right corner of the iPhone screen to show Control Center. The Bluetooth and Wi-Fi (or Cellular) buttons should be on.
How do I turn on and pair my APPLE WATCH SERIES SE 2ND GENERATION with an iPhone?
Follow these steps to turn on and pair your APPLE WATCH SERIES SE 2ND GENERATION:
Step 1: Put your APPLE WATCH SERIES SE 2ND GENERATION on your wrist. Adjust the band so it fits closely but comfortably.
Step 2: To turn on your APPLE WATCH SERIES SE 2ND GENERATION, press and hold the side button until you see the Apple logo. If it doesn’t turn on, you might need to charge the battery.
Step 3: Hold your iPhone near your APPLE WATCH SERIES SE 2ND GENERATION, wait for the pairing screen to appear on your iPhone, then tap Continue. You can also open the Apple Watch app on your iPhone and tap Pair New Watch.
Step 4: Tap Set Up for Myself.
Step 5: When prompted, position your iPhone so that your APPLE WATCH SERIES SE 2ND GENERATION appears in the viewfinder in the Apple Watch app. This pairs the two devices.
How do I continue setting up my APPLE WATCH SERIES SE 2ND GENERATION after pairing it with my iPhone?
Step 1: If this is your first Apple Watch, tap Set Up Apple Watch, then follow the instructions on your iPhone and Apple Watch to finish setup. If you’ve set up another Apple Watch before, you can use Express Setup or customize your settings.
Step 2: Follow the onscreen instructions to set up the following:
• Enter your Apple ID and password.
• Create a passcode—either a standard four-digit passcode or a long six-digit passcode.
• Customize settings for text size, and optionally enter personal information for fitness and health.
• Choose the health notifications you want to receive.
Step 3: If you have an Apple Watch with cellular, you can activate cellular service during setup or later in the Apple Watch app on your iPhone.
What should I do if I have trouble pairing my APPLE WATCH SERIES SE 2ND GENERATION?
• If you see a watch face when you’re trying to pair: Your APPLE WATCH SERIES SE 2ND GENERATION is already paired with an iPhone. You need to first erase all Apple Watch content and reset settings.
• If the camera doesn’t start the pairing process: Tap Pair Apple Watch Manually at the bottom of the iPhone screen and follow the onscreen instructions.
How do I pair more than one Apple Watch to my iPhone?
You can pair another Apple Watch in the same way you paired your first one. Bring your iPhone near your Apple Watch, wait for the pairing screen to appear on your iPhone, then tap Pair. Or follow these steps:
1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap All Watches at the top of the screen.
3. Tap Add Watch, then follow the onscreen instructions.
How do I switch between different Apple Watches paired with my iPhone?
Your iPhone detects the paired Apple Watch you’re wearing and automatically connects to it. Just put on a different Apple Watch and raise your wrist.
You can also choose an Apple Watch manually:
1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap All Watches at the top of the screen.
3. Turn off Auto Switch, then choose a different watch.
How do I pair my APPLE WATCH SERIES SE 2ND GENERATION with a new iPhone?
1. Use iCloud Backup to back up the iPhone currently paired with your APPLE WATCH SERIES SE 2ND GENERATION.
2. Set up your new iPhone. On the Apps & Data screen, choose to restore from an iCloud backup, then select the latest backup.
3. Continue iPhone setup and, when prompted, choose to use your APPLE WATCH SERIES SE 2ND GENERATION with your new iPhone.
4. When iPhone setup completes, your APPLE WATCH SERIES SE 2ND GENERATION prompts you to pair it with the new iPhone. Tap OK on your watch, then enter its passcode.
How do I charge my APPLE WATCH SERIES SE 2ND GENERATION?
Set up the charger:
1. In a well-ventilated area, place your charging cable on a flat surface.
2. Plug the charging cable into the power adapter (sold separately).
3. Plug the adapter into a power outlet.
Begin charging:
Place the Apple Watch Magnetic Charging Cable on the back of your APPLE WATCH SERIES SE 2ND GENERATION. The concave end of the charging cable magnetically snaps to the back and aligns it properly. The watch plays a chime when charging begins (unless in silent mode) and a charging symbol shows on the watch face. The symbol is red when the watch needs power and turns green when it’s charging.
How do I check the remaining battery power on my APPLE WATCH SERIES SE 2ND GENERATION?
To see remaining power, press the side button to open Control Center. To more quickly check the remaining power, add a battery complication to the watch face.
How do I turn on Low Power Mode on my APPLE WATCH SERIES SE 2ND GENERATION to save power?
1. Press the side button to open Control Center.
2. Tap the battery percentage, then turn on Low Power Mode.
3. To confirm your choice, scroll down, then tap Turn On.
You can also tap Turn On For, then choose On for 1 Day, On for 2 Days, or On for 3 Days.
Note: Low Power Mode turns off Always On Display, background heart rate and blood oxygen measurements, and heart rate notifications. It will turn off automatically when the battery is charged to 80%.
How do I turn off Low Power Mode on my APPLE WATCH SERIES SE 2ND GENERATION?
1. Press the side button to open Control Center.
2. Tap the battery percentage, then turn off Low Power Mode.
How can I check the battery health of my APPLE WATCH SERIES SE 2ND GENERATION?
You can find out the capacity of your Apple Watch battery relative to when it was new.
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Tap Battery, then tap Battery Health.
How can I turn on Optimized Battery Charging on my APPLE WATCH SERIES SE 2ND GENERATION?
To reduce battery aging, your APPLE WATCH SERIES SE 2ND GENERATION uses on-device machine learning to learn your daily charging routines so it can wait to finish charging past 80 percent until you need to use it.
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Tap Battery, then tap Battery Health.
3. Turn on Optimized Battery Charging.
How do I prevent apps from refreshing in the background on my APPLE WATCH SERIES SE 2ND GENERATION to maximize battery life?
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Go to General > Background App Refresh.
3. Turn off Background App Refresh to prevent all apps from refreshing. Or scroll down, then turn off refresh for individual apps.
Note: Apps with complications on the current watch face will continue to refresh, even when their background app refresh setting is off.
How do I turn my APPLE WATCH SERIES SE 2ND GENERATION on and off?
• Turn on: If your APPLE WATCH SERIES SE 2ND GENERATION is off, press and hold the side button until the Apple logo appears. The watch face appears when it is on.
• Turn off: Normally, you’ll leave your watch on all the time, but if you need to turn it off, press and hold the side button until the sliders appear, tap the power icon at the top right, then slide the Power Off slider to the right. Note: You can’t turn off your watch while it’s charging.
What are the different ways to wake the display on my APPLE WATCH SERIES SE 2ND GENERATION?
By default, you can wake the display in these ways:
• Raise your wrist. Your Apple Watch sleeps again when you lower your wrist.
• Tap the display or press the Digital Crown.
• Turn the Digital Crown upward.
If you don’t want your Apple Watch to wake when you raise your wrist or turn the Digital Crown, open the Settings app, go to Display & Brightness, then turn off Wake on Wrist Raise and Wake On Crown Rotation.
How can I choose how long my APPLE WATCH SERIES SE 2ND GENERATION waits before returning to the clock face from an open app?
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Go to General > Return to Clock, then choose when you want your Apple Watch to return to the clock face: Always, After 2 minutes, or After 1 hour.
3. You can also return to the clock face by pressing the Digital Crown.
By default, this setting applies to all apps, but you can choose a custom time for each app. To do so, tap an app on this screen, tap Custom, then choose a setting.
How can I set my APPLE WATCH SERIES SE 2ND GENERATION to wake to my last activity in an app?
For some apps, you can set your APPLE WATCH SERIES SE 2ND GENERATION to return you to where you were before it went to sleep. These apps include Audiobooks, Maps, Mindfulness, Music, Now Playing, Podcasts, Stopwatch, Timers, Voice Memos, Walkie-Talkie, and Workout.
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Go to General > Return to Clock, scroll down and tap an app, then turn on Return to App.
To return to the clock face, just stop what you’re doing in the app—for example, stop a podcast, end a route in Maps, or cancel a timer.
How can I keep the display on my APPLE WATCH SERIES SE 2ND GENERATION on for longer?
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Tap Display & Brightness, tap Wake Duration, then tap Wake for 70 Seconds.
How do I unlock my APPLE WATCH SERIES SE 2ND GENERATION?
You can unlock your APPLE WATCH SERIES SE 2ND GENERATION manually or automatically:
• Enter the passcode: Wake the watch, then enter the watch passcode.
• Unlock with your iPhone: Open the Apple Watch app on your iPhone, tap My Watch, tap Passcode, then turn on Unlock with iPhone. Your iPhone must be within normal Bluetooth range (about 33 feet or 10 meters) of your watch to unlock it.
How can I change the passcode on my APPLE WATCH SERIES SE 2ND GENERATION?
You can change the passcode you created when you first set up your watch by following these steps:
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Tap Passcode, then tap Change Passcode and follow the onscreen prompts.
How do I turn off the passcode on my APPLE WATCH SERIES SE 2ND GENERATION?
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Tap Passcode, then tap Turn Passcode Off.
Note: If you disable your passcode, some features won’t be available. For example, you can’t use Apple Pay or unlock your Mac with your Apple Watch.
What should I do if I forget the passcode for my APPLE WATCH SERIES SE 2ND GENERATION?
If you forget your passcode, you must erase your APPLE WATCH SERIES SE 2ND GENERATION. You can do so in these ways:
• Unpair your Apple Watch from your iPhone to erase your watch settings and passcode, then pair again.
• Reset your Apple Watch and pair it again with your iPhone.
How do I set my APPLE WATCH SERIES SE 2ND GENERATION to erase data after 10 failed unlock attempts?
To protect your information if your watch is lost or stolen, you can set it to erase its data after 10 consecutive incorrect passcode attempts.
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Tap Passcode, then turn on Erase Data.
How do I change the language or region on my APPLE WATCH SERIES SE 2ND GENERATION?
If you’ve set up your iPhone to use more than one language, you can choose the language that appears on your watch.
1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, go to General > Language & Region, tap Custom, then choose a language.
To add a language, tap Add Language, then make a choice.
How do I change the wrist or Digital Crown orientation on my APPLE WATCH SERIES SE 2ND GENERATION?
If you want to move your APPLE WATCH SERIES SE 2ND GENERATION to your other wrist or prefer the Digital Crown on the other side, adjust your orientation settings.
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Go to General > Orientation.
You can also open the Apple Watch app on your iPhone, tap My Watch, then go to General > Watch Orientation.
How do I remove and change the bands on my APPLE WATCH SERIES SE 2ND GENERATION?
Follow these general instructions for removing and changing bands.
1. Hold down the band release button on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Slide the band across to remove it, then slide the new band in.
Never force a band into the slot. If you’re having trouble removing or inserting a band, hold down the band release button again.
How can I display apps in a grid or list view on my APPLE WATCH SERIES SE 2ND GENERATION?
The Home Screen can display apps in a grid or list view. To change it, follow these steps:
1. From the watch face, press the Digital Crown to show the Home screen.
2. Turn the Digital Crown to scroll to the bottom of the screen, then choose Grid View or List View.
You can also open the Settings app, tap App View, then choose Grid View or List View.
How do I open an app from the Home Screen on my APPLE WATCH SERIES SE 2ND GENERATION?
How you open an app depends on which view you choose:
• Grid view: Tap the app icon. Turn the Digital Crown to see more apps.
• List view: Turn the Digital Crown, then tap an app.
How do I open or remove an app from the App Switcher on my APPLE WATCH SERIES SE 2ND GENERATION?
The App Switcher gives you quick access to the apps you’ve most recently used.
To open an app from the App Switcher:
1. Double-click the Digital Crown, then turn the Digital Crown to scroll through your most recently used apps.
2. Tap an app to open it.
To remove an app from the App Switcher:
Double-click the Digital Crown, then turn the Digital Crown to the app you want to remove. Swipe left on the app, then tap X.
How can I rearrange the apps in grid view on my APPLE WATCH SERIES SE 2ND GENERATION?
On your APPLE WATCH SERIES SE 2ND GENERATION:
1. Press the Digital Crown to go to the Home Screen in grid view.
2. Touch and hold an app, then drag the app to a new location.
3. Press the Digital Crown when you’re done.
On your iPhone:
Open the Apple Watch app on your iPhone, tap My Watch, tap App View, then tap Arrangement. Touch and hold an app icon, then drag it to a new location.
Note: In list view, apps are always arranged in alphabetical order.
How do I remove an app from my APPLE WATCH SERIES SE 2ND GENERATION?
• In grid view, touch and hold the Home Screen, then tap the X to remove the app from your APPLE WATCH SERIES SE 2ND GENERATION. It remains on your paired iPhone, unless you delete it there, too.
• In list view, swipe left on the app, then tap the trash icon to remove it from your APPLE WATCH SERIES SE 2ND GENERATION.
How do I check the storage used by apps on my APPLE WATCH SERIES SE 2ND GENERATION?
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Go to General > Storage.
How do I get new apps from the App Store on my APPLE WATCH SERIES SE 2ND GENERATION?
1. Open the App Store app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Turn the Digital Crown to browse featured apps and collections.
3. Tap a collection to see more apps.
4. To get a free app, tap Get. To buy an app, tap the price.
How do I manually install specific apps from my iPhone onto my APPLE WATCH SERIES SE 2ND GENERATION?
By default, apps on your iPhone that have a watchOS app available are automatically installed. To instead choose to install specific apps, follow these steps:
1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, tap General, then turn off Automatic App Install.
3. Tap My Watch, then scroll down to Available Apps.
4. Tap Install next to the apps you want to install.
How do I restart my APPLE WATCH SERIES SE 2ND GENERATION?
• Turn off your APPLE WATCH SERIES SE 2ND GENERATION: Press and hold the side button until the sliders appear, tap the power icon, then drag the Power Off slider to the right.
• Turn on your APPLE WATCH SERIES SE 2ND GENERATION: Hold down the side button until the Apple logo appears.
Note: You can’t restart your watch while it’s charging.
How do I force my APPLE WATCH SERIES SE 2ND GENERATION to restart?
If you can’t turn off your APPLE WATCH SERIES SE 2ND GENERATION or if the problem continues, you may need to force it to restart. Do this only if you’re unable to restart your watch.
To force restart, hold down the side button and the Digital Crown at the same time for at least ten seconds, until the Apple logo appears.
How do I unpair and erase my APPLE WATCH SERIES SE 2ND GENERATION?
1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap All Watches.
3. Tap the information icon next to your watch, then tap Unpair Apple Watch.
Your APPLE WATCH SERIES SE 2ND GENERATION is erased and removed from your iCloud account, and Activation Lock is removed.
How do I erase my APPLE WATCH SERIES SE 2ND GENERATION without unpairing it from my iPhone?
To erase your APPLE WATCH SERIES SE 2ND GENERATION without unpairing it, follow these steps.
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Go to General > Reset, tap Erase All Content and Settings, then enter your passcode.
3. If you have a cellular model, choose to keep or remove your cellular plan.
4. When the process finishes, set up your watch again. When asked, restore from a backup.
How can I update the software on my APPLE WATCH SERIES SE 2ND GENERATION?
You can update your watch software by checking for updates in the Apple Watch app on your iPhone.
1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, go to General > Software Update, then, if an update is available, tap Download and Install.
You can also open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION, then go to General > Software Update.
How do I locate my lost APPLE WATCH SERIES SE 2ND GENERATION?
1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap All Watches.
3. Tap the information icon next to your watch, then tap Find My Apple Watch.
4. In the Find My app on your iPhone, tap your watch to see its location on a map.
If the map tells you your APPLE WATCH SERIES SE 2ND GENERATION is at your location, tap Play Sound.
How do I mark my APPLE WATCH SERIES SE 2ND GENERATION as lost?
When you mark your watch as lost, it is locked with a passcode and the ability to pay with Apple Pay is suspended.
1. In the Find My app on your iPhone, tap Activate under Mark As Lost, then tap Continue.
2. Enter a phone number if you want the person who finds your watch to be able to contact you.
3. Tap Next, then enter a message that will be shown on your watch when someone finds it.
4. Tap Next, then tap Activate to mark your APPLE WATCH SERIES SE 2ND GENERATION as lost.
How should I clean my APPLE WATCH SERIES SE 2ND GENERATION?
• Turn off Apple Watch. Press and hold the side button, then drag the Power Off slider to the right.
• Depress the band release buttons and remove the band.
• Wipe Apple Watch clean with a nonabrasive, lint-free cloth. If necessary, you can also lightly dampen the cloth with fresh water.
• Dry Apple Watch with a nonabrasive, lint-free cloth.
To help avoid damaging your watch, observe the following:
• Don’t clean it while it’s charging.
• Don’t dry it or the bands using any external heat source (for example, a hair dryer).
• Don’t use cleaning products, ultrasonic cleaners, or compressed air.
How do I clean the Apple-branded bands for my APPLE WATCH SERIES SE 2ND GENERATION?
Remove the band from your APPLE WATCH SERIES SE 2ND GENERATION before cleaning. This information applies to Apple-branded bands only.
• For leather portions: Wipe them clean with a nonabrasive, lint-free cloth, lightly dampened with fresh water (if necessary). After cleaning, let the band air dry thoroughly before re-attaching. Do not soak leather bands in water as they are not water resistant.
• For all other bands and clasps: Wipe them clean with a nonabrasive, lint-free cloth, lightly dampened with fresh water (if necessary). Dry the band thoroughly with a nonabrasive, lint-free cloth before re-attaching. Stainless steel bands are not water resistant.
What are the trademarks of Apple Inc. associated with the APPLE WATCH SERIES SE 2ND GENERATION?
Apple, the Apple logo, AirPlay, AirPods, AirPods Pro, AirTag, Apple Books, Apple Music, Apple Pay, Apple TV, Apple Watch, AssistiveTouch, CarPlay, Digital Crown, Face ID, FaceTime, Handoff, HomeKit, HomePod, iMessage, iPad, iPadOS, iPhone, iTunes, Live Photos, Mac, macOS, MagSafe, Memoji, OS X, QuickPath, Safari, Shazam, Siri, tvOS, and watchOS are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
AirPods Max is a trademark of Apple Inc.
App Store, Burn Bar, iCloud, and iTunes Store are service marks of Apple Inc., registered in the U.S. and other countries and regions.
Apple Fitness+ is a service mark of Apple Inc.
What do the status icons on my APPLE WATCH SERIES SE 2ND GENERATION mean?
| Status icon | What it means |
|---|---|
| Red dot | You have an unread notification. Swipe down on the watch face to read it. |
| Green lightning bolt | Your APPLE WATCH SERIES SE 2ND GENERATION is charging. |
| Red lightning bolt | Your APPLE WATCH SERIES SE 2ND GENERATION battery is low. |
| Yellow circle | Low Power Mode is on. |
| Blue lock | Your APPLE WATCH SERIES SE 2ND GENERATION is locked. Tap to enter the passcode and unlock. |
| Water drop | Water Lock is on, and the screen doesn’t respond to taps. Press and hold the Digital Crown to unlock. |
| Crescent moon | Do Not Disturb is turned on. Calls and alerts won’t sound or light up the screen, but alarms are still in effect. |
| Person icon | Personal Focus is turned on. |
| Briefcase icon | Work Focus is turned on. |
| Bed icon | Sleep Focus is turned on. |
| Airplane | Airplane Mode is turned on. Wireless is turned off but non-wireless features are still available. |
| Theater masks | Theater mode is turned on. Your APPLE WATCH SERIES SE 2ND GENERATION is silenced and its display won’t light up when you raise your wrist. |
| Running person | You have a workout in progress. |
| Red X | Your APPLE WATCH SERIES SE 2ND GENERATION with cellular has lost the connection to a cellular network. |
| Red phone with slash | Your APPLE WATCH SERIES SE 2ND GENERATION has lost the connection with its paired iPhone. |
What are some other status icons on my APPLE WATCH SERIES SE 2ND GENERATION and what do they mean?
| Status icon | What it means |
|---|---|
| Green phone outline | Your APPLE WATCH SERIES SE 2ND GENERATION is connected to its paired iPhone. |
| Location arrow | An app on your APPLE WATCH SERIES SE 2ND GENERATION is using location services. |
| Wi-Fi symbol | Your APPLE WATCH SERIES SE 2ND GENERATION is connected to a known Wi-Fi network. |
| Wireless activity symbol | There’s wireless activity or an active process happening. |
| Microphone | The microphone is on. |
| Cellular bars | Your APPLE WATCH SERIES SE 2ND GENERATION is connected to a cellular network. The number of green bars indicates signal strength. |
| Walkie-Talkie icon | You’ve made yourself available to be reached on Walkie-Talkie. Tap the icon to open the Walkie-Talkie app. |
How do I open or close the Control Center on my APPLE WATCH SERIES SE 2ND GENERATION?
• Open Control Center: Press the side button once.
• Close Control Center: With Control Center open, turn your wrist away from you or press the side button again.
How can I rearrange the buttons in the Control Center on my APPLE WATCH SERIES SE 2ND GENERATION?
1. Press the side button to open Control Center.
2. Scroll to the bottom of Control Center, then tap Edit.
3. Touch and hold a button, then drag it to a new location.
4. Tap Done when you’re finished.
How do I remove or restore buttons in the Control Center on my APPLE WATCH SERIES SE 2ND GENERATION?
1. Press the side button to open Control Center.
2. Scroll to the bottom of Control Center, then tap Edit.
3. Tap the minus icon in the corner of the button you want to remove.
4. Tap Done when you’re finished.
To restore a button you’ve removed, open Control Center, tap Edit, then tap the plus icon in the corner of the button you want to restore. Tap Done when you’re finished.
How do I turn on the Handwashing feature on my APPLE WATCH SERIES SE 2ND GENERATION?
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Tap Handwashing, then turn on Handwashing Timer.
When your watch detects that you’ve started washing your hands, it starts a 20-second timer. If you stop washing in fewer than 20 seconds, you’re encouraged to finish the job.
What safety features are available on my APPLE WATCH SERIES SE 2ND GENERATION?
Your APPLE WATCH SERIES SE 2ND GENERATION can be helpful in a variety of emergency situations.
• Show important medical information: You can create a Medical ID that appears on the lock screen of your watch.
• Contact emergency services: Press and hold the side button to call emergency services or use Siri or Messages to make contact.
• Alert emergency services when a hard fall has been detected: With Fall Detection turned on, your watch can help connect you to emergency services.
• Alert emergency services when a severe car crash has been detected: Your watch can detect a severe car crash and help alert emergency services.
How do I view my Medical ID on my APPLE WATCH SERIES SE 2ND GENERATION?
Your watch can display your Medical ID so that it’s available to someone attending to you in an emergency.
1. Press and hold the side button until the sliders appear.
2. Slide the Medical ID slider to the right.
3. Tap Done when you’re finished.
You can also open the Settings app on your watch, then go to SOS > Medical ID.
How can I contact emergency services using my APPLE WATCH SERIES SE 2ND GENERATION?
Do one of the following:
• Press and hold the side button until the sliders appear, then drag the Emergency Call slider to the right.
• Press and keep holding the side button until your watch issues a warning sound and starts a countdown. When the countdown ends, your watch calls emergency services.
• Say “Hey Siri, call 911.”
• Open the Messages app, tap New Message, tap Add Contact, tap the number pad button, then type 911. Tap Create Message, enter your message, then tap send.
How do I turn Crash Detection on or off on my APPLE WATCH SERIES SE 2ND GENERATION?
Crash Detection is on by default. You can turn off alerts and automatic emergency calls from Apple after a severe car crash by following these steps:
1. Open the Settings app on your APPLE WATCH SERIES SE 2ND GENERATION.
2. Go to SOS > Crash Detection, then turn off Call After Severe Crash.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD APPLE WATCH SERIES SE 2ND GENERATION (01) PDF DOCUMENT