ANKO JB-2011T (01) PDF MANUAL

ANKO JB-2011T (01) PDF SUMMARY:

What are some important safety precautions to follow when using the Hot Plate?

Always read all instructions before using the Hot Plate. Always ensure the appliance is only used by a responsible adult. Always use the appliance on a stable level surface, close to a power socket and out of reach of children. Always turn the temperature control knob to “0” setting and disconnect from the power outlet when not in use and before cleaning. If the supply cord is damaged, it must be replaced by a qualified electrician in order to avoid a hazard, or the product must be disposed of. Always remove the plug from the power socket to disconnect. Do not pull the plug out by the cord. Always ensure that food is cooked in a pan or saucepan, do not attempt to cook food directly on the hot plate. Always ensure that the cookware used on the hot plate does not project beyond the area of the hot plate or overhang the controls. Keep the appliance and its cord out of reach of children less than 8 years. Do not use the appliance outdoors or for commercial purpose. Any other use will void the warranty. To protect against risk of electrical hazards, do not immerse the appliance power cord or plug in water or any other liquids. Never let the power cord hang over the edge of a counter of table. Never leave this appliance unattended during use. Never allow children to use this appliance, close supervision is necessary when this appliance is in use near children. Never touch the housing and hot plates when in use, as they get hot and may cause injury. Never leave oil or fat that is being heated unattended because this is a fire risk. Never operate the appliance by means of an external timer or separate remote-control system. Do not place on or near a hot gas or electric burner. Do not use an extension cord with this appliance. Do not dismantle and repair the appliance by yourself because of the danger of an electric shock. Do not allow this appliance to touch curtains, wall coverings, clothing, dish towels or other flammable material during use. Do not operate the appliance inside appliance cabinet or under a wall cabinet. When storing in an appliance cabinet, always unplug the unit from an electrical power outlet and ensure the appliance has completely cooled down. Caution, hot surface. Care must be taken. The surfaces are liable to get hot during use. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Only plug the appliance into 220-240V 50Hz electrical power outlet. WARNING: If the surface is cracked, switch OFF the appliance to avoid the possibility of electric shock. Connect to properly earthed power outlet socket only. Do not attempt to modify the plug in any way.

What are the intended uses for the appliance?

This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; and bed and breakfast type environments.

What are the benefits of this product?

The product offers independent cooking controls for optimum cooking flexibility, and small and large hotplates to accommodate both small and large pans.

What are the features of the hot plate?

The hot plate has small (900W) and large (1400W) hot plates, a temperature control knob for the 900W small hotplate, neon power indicators, and a temperature control knob for the large 1400W hotplate.

What steps should be taken before using the hot plate for the first time?

Remove all packing materials. Before using for the first time, turn the hot plates ON by turning the temperature control knob to the highest heat setting and heat up for several minutes. This will burn off any residue left from manufacture. Some odor and smoke could develop during this process, this is normal. Ensure good ventilation and it should disappear after few minutes of use. This should be the only time the hotplate is turned ON without a cooking utensil on it. Never switch ON the hot plates without placing a cooking utensil with food/liquid.

What are some recommendations for cookware to use on the hot plate?

For the most efficient operation, the cookware used should have a solid and even flat base, a diameter of approximately 15cm to 17cm and a maximum capacity of 1L (for use on the 900W hot plate). Cookware with a base smaller than the diameter of the boiling ring should not be used. Utensils with convex, concave or uneven bottoms should not be used. Cooking utensils should not protrude beyond the boiling ring or intrude into the area of close proximity of the controls.

How do you operate the hot plate?

Turn the controls to the required temperature setting to achieve the desired temperature. Both hot plates can be used at the same time. Care must be exercised to prevent the cookware handles from protruding over the adjacent hot plate. When not in use, always turn the temperature control knob to”0” position and then disconnect from mains power outlet. The neon power indicator will switch OFF when the appliance reaches the selected temperature and will cycle ON and OFF as it maintains the selected temperature setting.

What are the approximate temperatures for each setting on the dial?

Note: The operating temperatures are for reference only.

How do you clean the hot plate?

Disconnect from the power outlet and allow the hot plates to completely cool down. Do not immerse the appliance in any liquid. Do not allow the cord to touch any hot surfaces. Clean the painted surface with a damp soft cloth. Baked-on marks can be removed with a mild kitchen cleaner or a cloth moistened with mild detergent. Wipe with a dry cloth or paper towel and allow to completely dry. Commercially available double boiling ring cleaners are recommended to preserve the natural finish of the appliance.

What maintenance is required for the hot plate?

This appliance requires little maintenance and contains no user serviceable parts. Do not use the unit if it appears damaged in any way. Do not attempt to repair the unit by yourself. Any servicing that requires dis-assembly other than cleaning must be performed by a qualified appliance repair technician.

How should the hot plate be stored?

Unplug the hot plate. Store the appliance in a cool, dry location and out of reach of children.