ANKO EWL-24502-A (01) PDF Document

(1) Wireless Car Charging Pad

(2) User Manual

USB-A input: 5V⎓2A 9V⎓2A 12V⎓2A

Mobile phone wireless charging output: 5W/7.5W(iPhone)/10W/15W MAX

>7.5W Max for compatible iPhone

>10W Max for compatible Samsung smartphone

>15W Max for other compatible Android models

Charging efficiency: ≤75%

Transmission distance: ≤6MM

• 5V⎓2A is the minimum input for operation, and the maximum output is 5W.

• When the input is 9V⎓2A, the maximum output is 10W.

• When the input is 12V⎓2A, the maximum output is 15W.

(1) Using the attached USB-A cable, plug it into a suitable wall charger (sold separately).

(2) Place your wireless charging enabled device on the charging pad to start charging. Please pay attention to aligning the phone coil with the product coil position to avoid the phenomenon of not charging.

If a foreign object (metalware) is placed on the charging pad, the wireless charging function will stop, and the foreign object needs to be removed. Please note that if a phone case has a metal bracket or metal parts at the coil position, it will trigger the foreign object detection function, causing the phone to fail to charge.

(1) Do not disassemble or throw it into fire or water to avoid damage.

(2) Do not use the wireless charger in extremely hot, humid, or corrosive environments, to avoid circuit damage and leakage.

(3) Do not place it too close to magnetic stripe or chip cards (ID cards, credit cards, etc.) to avoid magnetic interference or data loss.

(4) Please keep a distance of at least 30cm between implantable medical devices (pacemakers, implantable cochlear devices, etc.) and the wireless charger to avoid potential interference with the medical device.

(5) To ensure the safety of children, make sure they do not play with the wireless charger as a toy.

(6) Make sure there is no metal foreign object between the charging pad and the phone when charging.