AMERICAN AUDIO ELS GO 8BT (01) PDF MANUAL

AMERICAN AUDIO ELS GO 8BT (01) PDF SUMMARY:

What should I do when I unpack the ELS GO 8BT?

Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your units for any damage and be sure all accessories necessary to operate the system have arrived intact. In the event damage has been found or parts are missing, please contact customer support for further instructions. Do not return the speaker to your dealer without first contacting customer support.

---

What should I do if I need help setting up the ELS GO 8BT or if I have questions?

American Audio provides a toll free customer support line to provide set up help and answer any question should you encounter problems during your initial set up or operation. You may also visit them on the web at http://www.americandj.com for any comments or suggestions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2610 E-mail: support@americandj.com

---

What is the caution regarding servicing the ELS GO 8BT?

There are no user serviceable parts inside this speaker. Do not attempt any repairs, without being instructed to do so by an authorized American Audio technician. Doing so will void your manufacturer’s warranty. In the unlikely event your speaker may require service, please contact American Audio.

---

What are the electrical precautions I should be aware of?

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

---

What are the general safety instructions for operating the ELS GO 8BT?

• All the safety and operating instructions should be read before the product is operated.
• The safety and operating instructions should be retained for future reference.
• All warnings on the product and in the operating instructions should be adhered to.
• All operating and use instructions should be followed.
• The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet.

---

What should I avoid using with the ELS GO 8BT?

• Do not use attachments not recommended by the product manufacturer as they may cause hazards.
• Do not use this product near water.
• Do not place this product on an unstable cart, stand, tripod, bracket, or table.

---

What should I keep in mind when using a cart with the ELS GO 8BT?

A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

---

What should I consider when setting up the ELS GO 8BT for ventilation?

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

---

What are the power source precautions for the ELS GO 8BT?

• This product should be operated only from the type of power source indicated on the marking label.
• The appliance should be installed in a stable location.
• The power cord of the appliance should be unplugged from the outlet when left un-used for a long period of time.

---

What should I do if the plug does not fit into the outlet?

• If this product is equipped with a polarized alternating current line plug, and you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
• If this product is equipped with a three-wire grounding type plug, and you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

---

How should I manage the power cord of the ELS GO 8BT?

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

---

What should I do to protect the ELS GO 8BT during a lightning storm?

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

---

Where should I avoid placing the antenna of the ELS GO 8BT?

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

---

What should I avoid doing with the power outlets of the ELS GO 8BT?

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

---

What should I avoid putting into the ELS GO 8BT?

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

---

When should I seek professional servicing for the ELS GO 8BT?

• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance.

---

What should I ensure when obtaining replacement parts for the ELS GO 8BT?

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

---

What should I request after servicing the ELS GO 8BT?

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

---

Where should I avoid mounting the ELS GO 8BT?

The product should not be mounted to a wall or ceiling.

---

Where should I avoid placing the ELS GO 8BT in relation to heat sources?

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

---

What is the warning regarding the sound pressure levels of the ELS GO 8BT?

ELS GO 8BT loudspeaker can easily reproduce sound pressure levels (SPL) sufficient enough to cause severe and permanent hearing damage. A great degree of care should be taken to protect your ears to prolong exposure to SPL in excess of 85dB.

---

What are the general safety precautions for the ELS GO 8BT?

• For adult use only – Keep out of the reach of children.
• Be sure all power is turned off before making speaker connections.
• When using the speaker make sure the grille is always attached.
• Always use a power cord that meets the manufactures exact power specifications.
• Disconnect from main power before making any type of connection.
• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture.
• This speaker is intended for indoor use only, use of this product outdoors voids all warranties.
• Always mount this speaker in safe and stable matter.
• Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the speaker.
• The speaker should be situated away from heat sources such as radiators, heat registers, stoves, or other mixers (including amplifiers) that produce heat.
• Be sure to save the packing carton in the event the unit needs to be returned for service.
• Read all documentation before attempting to operate your new mixer. Please save all your documentation for future reference.
• Do not spill water or other liquids in to or on to your speaker.
• Be sure that the local power outlet matches that of the required voltage for your speaker.
• Do not attempt to operate this speaker if the power cord has been frayed or broken. Please route your power cord out of the way of foot traffic.
• Always have the gain controls set to their lowest level during initial power-up to prevent speaker damage.

---

When should the speaker be serviced by qualified personnel?

• Objects have fallen, or liquid has been spilled into the speaker.
• The speaker has been exposed to rain or water.
• The speaker does not appear to operate normally or exhibits a change in performance.
• The terminal/cross-over plate has been damaged.

---

What file formats are compatible with the ELS GO 8BT?

• MPEG 1 Layer 1
• MPEG 1 Layer 2
• MP3 MPEG 1 Layer 3
• MPEG 2 Layer 2
• MPEG 2 Layer 3
• MPEG 2.5 Layer 3
• Windows Media Audio 1
• Windows Media Audio 2
• WMA Windows Media Audio 7
• Windows Media Audio 8
• Windows Media Audio 9

---

What are the sampling frequencies for the ELS GO 8BT?

• MPEG 1 32Khz, 44.lKhz, 48Khz
• MPEG 2 16Khz , 22.05Khz , 24Khz
• MPEG 2.5 8Khz, 11.025Khz, 12Khz
• WMA 8Khz ~ 48Khz

---

What are the bitrates for the ELS GO 8BT?

• MPEG 1 Layer 1 32 Kbps ~ 448 Kbps
• MPEG 1 Layer 2 32 Kbps ~ 384 Kbps
• MPEG 1 Layer 3 32 Kbps ~ 320 Kbps
• MPEG 2 Layer 2 8 Kbps ~ 160 Kbps
• MPEG 2 Layer 3 8 Kbps ~ 160 Kbps
• MPEG 2.5 Layer 3 8 Kbps ~ 160 Kbps
• WMA 8 Kbps ~ 320 Kbps

---

What is the function of the LCD screen on the ELS GO 8BT?

This screen will display all relevant information about the functions being selected or the Mp3 file being played.

---

How do I use the REPEAT/EQ button?

Press this button once to activate repeat, which will repeat the currently playing song until stop is pressed. Press and hold this button to activate EQ mode, which let select among the different types equalization that can be applied the song currently playing.

---

How do I use the USB/SD/BLUETOOTH button?

Press this button once to select the USB & SD drive. Press this button again to select Bluetooth.

---

How do I use the STOP/POWER button on the ELS GO 8BT?

Press this button once to stop the Mp3 player. Press and hold this button to turn the Mp3 player on/off.

---

What is the STEREO INPUT jack used for?

3.5mm input jack for use with personal music players.

---

What is the 1/4” OUTPUT jack used for?

This output jack is used to link to another speaker.

---

How do I control the volume of a device connected to the Stereo Input jack?

The MP3 Player Volume Control knob is used to regulate output volume of a connected personal music player connected to the Stereo Input jack. Turning the knob in a clockwise direction will increase the volume level.

---

How do I use the TREBLE CONTROL knob?

This knob is used to adjust the amount treble applied to the output signal. The maximum amount of treble gain is +15dB and the maximum amount of treble decrease is -15dB. Turning the knob in a counter-clockwise direction will decrease the amount of treble applied to a channel signal, turning the knob in a clockwise direction will increase the amount of treble applied to a channel signal.

---

How do I use the BASS CONTROL knob?

This knob is used to adjust the amount bass applied to the output signal. The maximum amount of bass gain is +15dB and the maximum amount of bass decrease is -15dB. Turning the knob in a counter-clockwise direction will decrease the amount of bass applied to a channel signal, turning the knob in a clockwise direction will increase the amount of bass applied to a channel signal.

---

What is the MAIN POWER INLET & FUSE HOLDER used for?

This connector is used to supply main power to the unit via the included detachable power cord. The power connection uses an I.E.C. type connector, use only the supplied polarized AC power cord. Use only a power cord that matches this type of connection. Be sure to only connect this unit to a power outlet that matches the printed power label on the unit. Never use a power when the ground prong has been removed or broken off. The ground prong is used to reduce the risk of electrical shock in case of an electrical short. This cord is designed to fit in one direction only. Do not attempt to force a cord if it does not fit, be sure the cord is being inserted properly.

---

What type of fuse should be used in the ELS GO 8BT?

This housing stores the 5 amp GMA protective fuse for 100V and a 3.15 amp GMA for 230V. Always replace with the exact same type fuse, unless otherwise instructed, by an authorized American Audio service technician. Replacing with any other type of fuse than that of the recommended fuse will void your unit warranty.

---

How do I use the ECHO LEVEL knob?

This knob is used to regulate the Echo output.

---

How do I use the MAIN POWER SWITCH?

This is the main power ON/OFF button. Before main power is applied, be sure you have made all connections to the speaker. Remember to avoid damaging pops to the speakers, the mixer is turned on first and turned off last.

---

What is the DC POWER INPUT used for?

Connect the a standard DC power adapter here. (Not Included).

---

What do the CHARGING & BATTERY STATUS LEDS indicate?

The red LED will glow when the unit is being charged. The green LEDs will indicate the charge level and how much battery charge remains.

---

What does the POWER LED indicate?

This LED indicates that the speaker is on.

---

What does the PEAK LED indicate and what should I do if it is lit?

If this LED is lit it means that your signal is clipping. To stop the signal from clipping lower the volume to the point where the LED is blinking along with the bass beat.

---

How do I use the RCA LINE/STEREO INPUT VOLUME knob?

This knob is used to regulate the output volume of the line level source connected to the Line Level Input Jack.

---

How do I use the MIC VOLUME knob?

This knob is used to regulate the microphone output volume. Turning the knob in a clockwise direction will increase the volume level.

---

How do I use the INSTRUMENT INPUT VOLUME knob?

This knob is used to regulate the volume of the source connected to the instrument input. Turning the knob in a clockwise direction will increase the volume level.

---

What is the BALANCED RCA/LINE LEVEL INPUT used for?

This connection is designed to accept a balanced line input signal from a mixer or other line level device with a balanced output jack. Use a balanced cable when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be sure to connect only line level input devices such as mixers and tape machines to this jack.

---

What is the MIC XLR/1/4” INPUT used for?

This jack will accept a XLR or 1/4” plug. The volume output level for this microphone will be controlled by the MIC Volume knob.

---

What is the INSTRUMENT INPUT used for?

1/4” input jack used to connect an instrument.

---

How do I use the NEXT/VOL + BUTTON?

Press this button once to go to the next song. Press and hold this button to increase the volume of the Mp3 Player.

---

What is the USB INPUT used for?

Plug in any USB memory stick with Mp3 files to be played.

---

How do I use the PAUSE/PLAY BUTTON?

Press this button once to play your chosen song, press this button again to momentarily interrupt playing. Press and hold this button to pause the playing song.

---

How do I use the PREVIOUS/VOL – BUTTON?

Press this button once to go to the previous song. Press and hold this button to decrease the volume of the Mp3 Player.

---

What is the SD INPUT used for?

This slot is used to insert a SD, non-volatile memory card with Mp3 files to be read.

---

What is the range of the remote control for the ELS GO 8BT?

The remote control can operate the speaker at a distance of up to 3 meters from your audio installation.

---

What are the functions of the remote control?

• POWER
• USB/SD/BLUETOOTH MODE
• FORWARD SCAN
• VOLUME +
• NEXT
• PLAY/PAUSE BUTTON
• VOLUME –
• EQ SELECT
• TRACK NUMBERS
• RANDOM
• PREVIOUS
• REVERSE SCAN

---

How do I monitor the battery status of the ELS GO 8BT?

The Battery LED indicators located on rear of unit will display the charge status of the battery. The battery life under normal conditions will last 6 hours. Continue to check the battery status on the rear of the unit to keep track of the battery life. Please do not let the battery fully die, this severely shortens the life of the battery.

---

How do I recharge the battery of the ELS GO 8BT?

To recharge the battery, plug the supplied I.E.C. power supply into the input on the rear of the unit and plug the other end into a matching power supply. It takes about 4.5 hours to reach full charge.

---

What are the guidelines for pole mounting the ELS GO 8BT?

• Always be sure the stand is designed to support the weight of the speaker.
• In outdoor situations that are prone to windy conditions and strong wind gust, be sure to use sandbags as additional tripod support, this will greatly reduce the risk of tipping.
• Do not stack speakers on top of each other when mounting on a tripod. Only one speaker should be mounted to a tripod at one time.
• Always position the tripod legs away from foot traffic.
• Extend the tripod legs to their fully extended position to avoid accidental tipping.
• Observe and follow all safety guidelines and regulations specified by the tripod’s manufacturer.
• Be sure the tripod is situated on a flat, level, and stable surface.
• Always tighten all tripod locks.