AMAZON BASICS B07D3DZ1XV (01) PDF Document

When using the AMAZON BASICS B07D3DZ1XV electrical product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury, including the following:

Do not attempt to repair the product yourself. In case of malfunction, repairs are to be conducted by qualified personnel only.

To avoid overheating, do not cover the product.

Do not use this product in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

During cleaning or operation, do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.

Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

Children of less than 3 years should be kept away unless continuously supervised.

Children aged from 3 years and less than 8 years shall only switch on/off the product provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the product or perform user maintenance.

The product must not be located immediately below a socket outlet.

Do not use this product with a programmer, timer, separate remote-control system or any other device that switches the product on automatically, since a fire risk exists if the product is covered or positioned incorrectly.

Do not use this product in the immediate surroundings of a bath, a shower or a swimming pool.

Do not use if there are visible signs of damage to the product.

Use this product on a horizontal and stable surface.

Before connecting the product to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the product rating label.

Never use a damaged product! Disconnect the product from the electrical outlet and contact your retailer if it is damaged.

Do not operate the product with wet hands or while standing on a wet floor. Do not touch the power plug with wet hands.

Disconnect the product from the power supply when it is not in use.

Do not use this product in areas where dangerous and flammable materials, like petrol, paint thinner, paints and lacquers are used.

The AMAZON BASICS B07D3DZ1XV is classified as protection class II. This means the product is equipped with reinforced or double insulation between the mains supply circuit and the output voltage or the casing. Therefore, it does not require a safety connection to an electrical earth (ground).

The intended use of the AMAZON BASICS B07D3DZ1XV includes the following parameters:

This product is only suitable for well insulated spaces or occasional use.

This product is intended for temporary heating or ventilating residential rooms.

This product is intended for household use only. It is not intended for commercial use.

This product is intended to be used in dry indoor areas only.

No liability will be accepted for damages resulting from improper use or non-compliance with the instructions provided in the PDF.

The AMAZON BASICS B07D3DZ1XV features the following components as described in the product description:

1. Power indicator

2. Front grille

3. Air intake

4. Tip-over switch

5. Power cord with plug

6. Thermostat knob

7. Mode knob

Before using the AMAZON BASICS B07D3DZ1XV for the first time, perform the following steps:

Keep any packaging materials away from children as they are a potential source of danger, such as suffocation.

Check the product for transport damages.

Clean the product before first use.

Before connecting the product to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the product rating label.

To operate the AMAZON BASICS B07D3DZ1XV, follow these instructions:

The power indicator stays on as long as the power plug is connected to the power source.

Step 1. Connect the power plug to an appropriate power outlet.

Step 2. Turn the thermostat knob clockwise all the way to the high position (+).

Step 3. Set the mode knob to the desired setting:

Solid Circle Symbol: The product is off

Fan Symbol: Fan only mode

Single Wave Symbol: Low heat mode

Double Wave Symbol: High heat mode

To use the thermostat control on the AMAZON BASICS B07D3DZ1XV:

Step 1. Switch on the product.

Step 2. When the desired temperature is reached, turn the thermostat knob counter-clockwise until it turns off.

Step 3. The thermostat control maintains the temperature by turning the product on and off automatically.

The AMAZON BASICS B07D3DZ1XV is designed to automatically shut-off when tipped over. When the product is returned to the proper upright position, it will resume normal operation.

To prevent electric shock, always unplug the AMAZON BASICS B07D3DZ1XV before cleaning. During cleaning, do not immerse the electrical parts of the product in water or other liquids and never hold it under running water.

Cleaning instructions:

To clean, wipe with a soft, slightly moist cloth.

Dry the product after cleaning.

Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance instructions:

Store in a cool and dry place away from children and pets, ideally in original packaging.

Avoid any vibrations and shocks.

The technical details for the AMAZON BASICS B07D3DZ1XV are as follows:

The following table provides information requirements for the AMAZON BASICS B07D3DZ1XV:

The AMAZON BASICS B07D3DZ1XV uses a mechanic thermostat for room temperature control.

If the plug of the AMAZON BASICS B07D3DZ1XV needs to be changed or the fuse replaced, follow these safety instructions:

Ensure the voltage of your electricity supply is 220-240 V before connecting.

The appliance is protected by a 13 A approved (BS 1362) fuse. If replacing the fuse, the fuse cover must be refitted.

If the plug must be changed, the old plug must be disposed of safely. The wires in the power cable are coloured as follows:

A. Green/Yellow = Earth

B. Blue = Neutral

C. Brown = Live

The Green/Yellow wire must be connected to the terminal marked E or by the earth symbol or coloured Green or Green/Yellow. The Blue wire must be connected to the terminal marked N or coloured Black. The Brown wire must be connected to the terminal marked L or coloured Red.

The outer sheath of the cable should be firmly held by the clamp.