ACER ASPIRE GO 14 AG14-32P (01) PDF Document

When using a charging cart or a small space to simultaneously charge or operate multiple devices on the ACER ASPIRE GO 14 AG14-32P, the area must be well-ventilated and the temperature kept between 0 °C (32 °F) to 35 °C (95 °F). Battery charging must be stopped when 100% capacity is reached, as continuous charging can cause deformation or damage to the battery/device.

The useful lifespan of the battery in the ACER ASPIRE GO 14 AG14-32P is adversely affected by:

• Constantly charging the battery/device when already at full capacity.
• Charging the battery/device at temperatures above 35 °C (95 °F) or below 0 °C (32 °F).

To prevent battery damage in the ACER ASPIRE GO 14 AG14-32P:

• Stop charging the battery once it reaches 100% capacity; regularly or frequently charging a fully charged battery for an extended period of time may cause battery deformation or damage. It is recommended to recharge the device when the battery level drops below 70% capacity.
• Do not charge the battery in temperatures above 35 °C (95 °F) or below 0 °C (32 °F). Charging in abnormally high or abnormally low temperatures can cause battery deformation or damage.
• The charging port must be clean and free from debris and should only be used with Acer charging equipment. Use of a non-Acer battery or charging equipment can cause damage to the product and will void the warranty.
• If you plan to store the device for a long period of time, turn off the device, remove AC power and store the product at room temperature (0 °C – 35 °C) in a dry (humidity: 45% – 80%), well-ventilated area. Avoid direct sunlight, high temperatures and high humidity. Do not leave your device’s battery completely discharged for a long period of time; this may cause battery deformation or damage. It is recommended that the battery is checked and charged to approximately 50% capacity every 6 months.
• ONLY CHARGE THE BATTERY IN A CLEAN, WELL VENTILATED AREA.

Warnings for battery handling in the ACER ASPIRE GO 14 AG14-32P:

• Batteries may explode if not handled properly.
• Do not disassemble or dispose of batteries in fire.
• Do not short external contacts, crush, puncture or otherwise tamper with batteries. Keep batteries away from children.
• Follow local regulations when disposing of used batteries.

Precautions when replacing the battery in the ACER ASPIRE GO 14 AG14-32P:

• Improper replacement or mishandling could damage the battery, cause overheating, result in injury, and risk fire or explosion.
• Device with built-in battery: A built-in battery must be replaced by an authorized service center. Do not attempt to replace or remove the battery by yourself.
• Device with removable battery: The battery should only be replaced with parts approved by Acer. Do not replace the battery with any parts other than approved ones.

For the Lithium-based battery in the ACER ASPIRE GO 14 AG14-32P, do not use it in a humid, wet or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 50 °C (122 °F).

Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will must not occur at temperatures below 0 °C (32 °F) or above 35 °C (95 °F).

The full performance of a new battery in the ACER ASPIRE GO 14 AG14-32P is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the operation time becomes noticeably shorter than normal, check an authorized reseller to purchase a new battery.

Use the battery in the ACER ASPIRE GO 14 AG14-32P only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip or pen causes direct connection of the positive (+) and negative (-) terminals of the battery.

The capacity and lifetime of the battery will be reduced if the battery is left in hot or cold places, such as in a closed car in summer or winter. Always try to keep the battery between 15° C and 25° C (59° F and 77° F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is especially limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

For the internal battery in the ACER ASPIRE GO 14 AG14-32P:

• Do not attempt to replace a built-in rechargeable battery; battery replacement must be done by an Acer- authorized repair facility.
• Recharge the battery by following the instruction included in the product documentation.

To turn the power off on the ACER ASPIRE GO 14 AG14-32P, do any of the following:

• Use the Windows shutdown command: Press the Windows key or select the Windows Start button, select Power > Shut down.
• Right-click the Windows Start button > Shut down or sign out > Shut down.

If you need to power down the ACER ASPIRE GO 14 AG14-32P for a short while, but don’t want to completely shut it down, you can put it to Sleep by doing any of the following:

• Press the power button.
• Press the sleep hotkey.
• Press the Windows key or select the Windows Start button, select Power > Sleep.
• Right-click the Windows Start button > Shut down or sign out > Sleep.

If you cannot power off the ACER ASPIRE GO 14 AG14-32P normally, press and hold the power button for up to ten seconds to shut down the computer. If you turn off the computer and want to turn it on again, wait at least two seconds before powering up.

To ensure the ACER ASPIRE GO 14 AG14-32P computer serves you well, follow these guidelines:

• Only use the adapter provided with your device, or an Acer-approved adapter to power your device.
• Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator.
• Do not expose the computer to temperatures below 0 °C (32 °F) or above 50 °C (122 °F).
• Do not subject the computer to magnetic fields.
• Do not expose the computer to rain or moisture.
• Do not spill water or any liquid on the computer.
• Do not subject the computer to heavy shock or vibration.
• Do not expose the computer to dust or dirt.
• Never place objects on top of the computer.
• Do not slam the computer display when you close it.
• Never place the computer on uneven surfaces.

Ways to take care of the AC adapter for the ACER ASPIRE GO 14 AG14-32P:

• Do not connect the adapter to any other device.
• Do not step on the power cord or place heavy objects on top of it. Route the power cord and any cables away from where people walk.
• When unplugging the power cord, do not pull on the cord itself but pull on the plug.
• The total ampere ratings of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating.

When cleaning the ACER ASPIRE GO 14 AG14-32P, follow these steps:

1. Turn off the computer.
2. Disconnect the AC adapter.
3. Use a soft, moist cloth. Do not use liquid or aerosol cleaners.

If your computer is dropped or visibly damaged, or does not work normally, please contact your nearest authorized Acer service center.

The ACER ASPIRE GO 14 AG14-32P comes with a computer security slot for a security lock. Wrap a computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available.

Setting passwords on the ACER ASPIRE GO 14 AG14-32P creates several different levels of protection for your computer and data:

• Supervisor Password prevents unauthorized entry into the BIOS utility. Once set, you must enter this password to gain access to the BIOS utility.
• User Password secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from Hibernation (if available) for maximum security.
• Password on Boot secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from Hibernation (if available) for maximum security.

When a password is set on the ACER ASPIRE GO 14 AG14-32P, a password prompt appears in the center of the display screen.

• When the Supervisor Password is set, a prompt appears when you enter the BIOS utility. Type the Supervisor Password and press Enter to access the BIOS utility. If you enter the password incorrectly, a warning message appears. Try again and press Enter.
• When the User Password is set and the password on boot parameter is enabled, a prompt appears at boot-up. Type the User Password and press Enter to use the computer. If you enter the password incorrectly, a warning message appears. Try again and press Enter.

If you fail to enter the password correctly after three tries on the ACER ASPIRE GO 14 AG14-32P, the system halts. Press and hold the power button for four seconds to shut down the computer. Then turn on the computer again, and try again.

To activate the BIOS utility on the ACER ASPIRE GO 14 AG14-32P, press F2 while the computer logo is being displayed.

To set the boot sequence in the BIOS utility for the ACER ASPIRE GO 14 AG14-32P, activate the BIOS utility, then select Boot from the categories listed on the top of the screen.

To set a password on boot in the BIOS utility for the ACER ASPIRE GO 14 AG14-32P, activate the BIOS utility, then select Security from the categories listed on the top of the screen. Find Set Supervisor Password and enter a password to enable this feature. Once you have entered a password for this feature, you may then enable/disable Password on Boot. Remember to select F10 to properly save and exit the BIOS utility when you are done making changes.

The ACER ASPIRE GO 14 AG14-32P uses Fast startup to start quickly, but it also uses a small amount of power to check for signals to start, which slowly drains the battery. If you prefer to reduce power requirements and environmental impact, turn off Fast startup by following these steps:

1. Press the Windows key or select the Windows Start button then search for “Choose a power plan”.
2. Select Choose what the power buttons do.
3. Select Change settings that are currently unavailable.
4. Scroll down and disable Turn on fast start-up.
5. Select Save changes.

Note: If Fast startup is off, your computer will take longer to start from Sleep. Your computer will also not start if it receives an instruction to start over a network (Wake on LAN).

The power meter on the ACER ASPIRE GO 14 AG14-32P indicates the current battery level. Rest the cursor over the battery/power icon on the taskbar to see the battery’s present charge level.

If the battery-low warning appears on the ACER ASPIRE GO 14 AG14-32P and the AC adapter and a power outlet are available, the recommended action is:

1. Plug the AC adapter into the computer, and then connect to the main power supply.
2. Save all necessary files.
3. Resume work.

Turn off the computer if you want to recharge the battery rapidly.

If the battery-low warning appears on the ACER ASPIRE GO 14 AG14-32P and the AC adapter or a power outlet is unavailable, the recommended action is:

1. Save all necessary files.
2. Close all applications.
3. Turn off the computer.

Follow these steps to disconnect the ACER ASPIRE GO 14 AG14-32P from external accessories:

1. Save any open files.
2. Remove discs from optical drive.
3. Shut down the computer or put it into Sleep or Hibernate mode.
4. Close the display cover.
5. Disconnect the cord from the AC adapter.
6. Disconnect the keyboard, pointing device, printer, external monitor and other external devices.
7. Disconnect the Kensington / Noble lock if you are using one to secure the computer.

When moving the ACER ASPIRE GO 14 AG14-32P within short distances, close and latch the display cover to place it in Sleep mode. You can now safely take the computer anywhere you go within the building. If you are moving within a larger distance, you may choose to shut down the computer.

Note: The computer may enter Hibernation or Deep Sleep mode after being in Sleep mode for a period of time.

When moving the ACER ASPIRE GO 14 AG14-32P within short distances, you probably do not need to bring anything with you other than your computer. If your battery is not fully charged, you may want to bring the AC adapter with you to plug in your computer. If you cannot find an electrical outlet, reduce the drain on the battery by putting the computer in Sleep mode. Press the Sleep hotkey or close the display cover whenever you are not actively using the computer.

When moving the ACER ASPIRE GO 14 AG14-32P within a larger distance, for instance, traveling locally or internationally, after shutting down the computer and disconnecting any external devices, pack the computer in a protective case that can prevent the computer from sliding around and cushion it if it should fall.

The USB Type-A ports on the ACER ASPIRE GO 14 AG14-32P have the following characteristics:

• USB 3.2 Gen 1 compatible port(s) are blue.
• They are compatible with USB 3.2 Gen 1 and earlier devices.
• For optimal performance, use USB 3.2 Gen 1-certified devices.
• They are defined by the USB 3.2 Gen 1 specification (SuperSpeed USB).

The USB Type-C port on the ACER ASPIRE GO 14 AG14-32P:

• Supports DisplayPort audio/video output.
• Delivers up to 3 A at 5 V DC for USB charging.
• DC-in: requires power adapter or power source providing 45 W at 19 V. For optimal performance, please use a certified Acer power adapter or USB Power Delivery device.

Note: This device supports a maximum of two external displays.

To connect an external monitor to the ACER ASPIRE GO 14 AG14-32P:

1. Check that the computer is powered off and the monitor power switch is turned off.
2. Attach the video cable to the monitor port on the computer.
3. Connect the monitor power cable and plug it into a properly grounded wall outlet.
4. Follow any setup instructions in the monitor’s user’s guide.
5. Turn on power to the monitor, then the computer.
6. The correct resolution and refresh rate should be detected automatically. If necessary, change the display settings used by the computer.

Note: To access the display controls, right-click anywhere on the desktop and select Display settings.

For audio devices on the ACER ASPIRE GO 14 AG14-32P:

• Use the headphone port to plug in stereo headphones or powered speakers; connecting an audio device to the headphone port disables the built-in speakers.
• Use the microphone port to connect an external microphone; connecting a microphone disables the built-in microphone.

Note: Some computers have a single “combo” port that allows you to use single-pin headsets with a built-in microphone. These headsets are most commonly used with smartphones.

Touchpad gestures for the ACER ASPIRE GO 14 AG14-32P:

Note: The touchpad is sensitive to finger movement; the lighter the touch, the better the response. Please keep the touchpad and your fingers dry and clean.

To change the touchpad settings on the ACER ASPIRE GO 14 AG14-32P to suit your personal requirements, please do the following:

1. In the icon tray in the lower right-hand corner of the screen, select the Network, Sound and Battery icon to open the Quick settings pane.
2. Select All settings.
3. Select Bluetooth & devices > Touchpad.
4. Now you can adjust the settings to suit your personal needs. You can switch off the touchpad if you prefer to use a mouse. Or you can adjust the touchpad sensitivity to suit your needs. Scroll down to see more settings.

Windows backup on the ACER ASPIRE GO 14 AG14-32P allows you to quickly and easily back up your files and restore them if the originals are lost, damaged or deleted. To create a file history backup:

1. Click on Settings in the Start menu, select Accounts, and then select Windows backup.
2. Click Manage sync settings for OneDrive folder syncing to continue.
3. Make sure the folders that you want to back up are selected and click Save changes to continue.
4. You can select View progress to watch files sync until it completes.
5. To open the OneDrive folder, double-click OneDrive icon in the notification area.

To reset this PC and keep my files on the ACER ASPIRE GO 14 AG14-32P:

1. Click on Settings in the Start menu, select System, and then select Recovery.
2. Click Reset PC to Choose an option.
3. Select Keep my files to refresh your PC and reinstall your operating system without removing your personal files.
4. Choose from the two options – Cloud download or Local reinstall to reinstall Windows. (Ensure you are connected to the internet when using Cloud download.)
5. Click Change settings to open the Choose settings options.
6. Choose your settings options and follow the instructions on screen. Click Confirm then Next to continue.
7. Resetting the PC will reinstall Windows, change settings back to their factory defaults and remove all preinstalled apps and programs without removing your personal files. Click Reset to continue. This will take a while and your PC will restart.
8. You will be shown the reset progress on the screen. The screen will turn off during the reset process.
9. The screen will turn back on when it is installing Windows. Your PC will restart several times during the reset process.
10. Follow the process until it completes.
11. When your PC has completed the reset process, Windows will have been reset back to its factory default settings without removing your personal files.

To reset this PC and remove everything on the ACER ASPIRE GO 14 AG14-32P back to factory default:

1. Click on Settings in the Start menu, select System, and then select Recovery.
2. Click Reset PC to Choose an option.
3. Select Remove everything to reset your PC back to its factory default.
4. Choose from the two options – Cloud download or Local reinstall to reinstall Windows. (Ensure you are connected to the internet when using Cloud download.)
5. Click Change settings to open the Choose settings options.
6. Choose your settings options and follow the instructions on screen. Click Confirm then Next to continue.
7. Click Reset to continue.
8. You will be shown the reset progress on the screen. The screen will turn off during the reset process.
9. The screen will turn back on when it is installing Windows. Your PC will restart several times during the reset process.
10. Follow the process until it completes.
11. When your PC has completed the reset process, Windows will use factory default settings.

Bluetooth on the ACER ASPIRE GO 14 AG14-32P is disabled by default. To enable your computer’s Bluetooth adapter and add a device, do the following:

1. Press the Windows key or select the Windows Start button > Settings > Bluetooth & devices, and click the toggle under Bluetooth to enable/disable it.
2. Click on Add device then select the device that you want to add.
3. Your computer will automatically start searching for devices, as well as make itself visible to other devices.
4. Select the device you wish to pair from the list of discovered devices.
5. After pairing, if there is a code displaying on the screen, enter that code on the device to proceed the connection.

To connect to a wireless network on the ACER ASPIRE GO 14 AG14-32P, follow the steps below:

1. Ensure you have a wireless router/access point and current internet connection through the ISP of your choice. Make a note of the wireless network’s name and password (if necessary). If you are trying to connect to a public network (such as at a coffeeshop), make sure you have the wireless network’s name.
2. Click Network icon in the notification area.
3. Select Manage WiFi connections.
4. You will see a list of available wireless networks. Select the one you wish to use.
5. Once you select a wireless network, select Connect.
6. If required, enter the network’s password.

Note: If Wi-Fi is turned off, please click Wi-Fi icon to turn it on.

There are three available modes to choose from in the System Usage Mode on the ACER ASPIRE GO 14 AG14-32P: Silent, Normal and Performance. You can switch between modes at any time by pressing the Fn+F keys.

• Silent: For web browsing or online chatting.
• Normal: For productivity tools, like Microsoft Office.
• Performance: For heavy load games, rendering, streaming, or video consumption.

There are two battery charging options available for selection in Personal Settings on the ACER ASPIRE GO 14 AG14-32P:

• Optimized Battery Charging (Recommended): To reduce battery aging, charging capacity will be limited to 80%. It is highly recommended to opt for this mode as it effectively enhances the overall battery life.
• Full Battery Charging: Charging to maximum capacity for longer mobile to use.

You can make use of the designated USB port on the ACER ASPIRE GO 14 AG14-32P to charge mobile devices, even when the laptop is powered off or in Hibernation mode. You can set a battery level; when the battery power drops below this set level, the charging will be automatically halted. This feature serves to optimize laptop energy, particularly in situation where a power adapter is not available.

The BluelightShield on the ACER ASPIRE GO 14 AG14-32P can be enabled to reduce blue-light emissions from the screen to protect your eyes. You have the flexibility to toggle BluelightShield on or off, and choose from four different modes to fit your needs:

• Low Reduction: Reduces blue light emission from the LED backlit screen by 10% to 25% for basic protection.
• Medium Reduction: Reduces blue light emission from the LED backlit screen by 26% to 45% to protect your eyes.
• High Reduction: Reduces blue light emission from the LED backlit screen by 46% to 65% for maximum protection.
• Long Hour Mode: Professionally tuned to reduce eye strain over an extended period of time.

Select the App Center tab on the ACER ASPIRE GO 14 AG14-32P to swiftly launch the installed app on your computer. In case you cannot locate the app within the comprehensive list of All Apps, utilize the search function. In addition, you can refine the display by showing only preloaded apps or games, and organize them based on Popularity, Alphabet, or Installation Date. If the app is newly installed, then click the Refresh icon to reload the view.

Note: For ease of access, you can pin the app shortcut to the widget card. To do so, hover the cursor over the app and click the Pin icon. To unpin the app from the widget card, repeat the step.

Common threats cybercriminals use include:

• Ransomware: A form of malware that will encrypt personal data files on your computer and attached devices. To avoid getting infected, stay protected with internet security software like McAfee Security and perform regular backups. If infected, think twice before paying the ransom.
• Botnets: A string of infected, connected computers coordinated together to perform a task. If infected, use internet security software like McAfee to scan all of your devices.
• Viruses/Malware: A virus is a self-replicating piece of malicious code that travels by inserting itself into files or programs. Take steps to avoid infection by staying protected with internet security software like McAfee.

When using public Wi-Fi with the ACER ASPIRE GO 14 AG14-32P, use a virtual private network (VPN) to ensure your privacy and anonymity are protected. VPN services can encrypt all the data that you send and receive while using a public Wi-Fi hotspot, securing your information from hackers and other users of the same connection.

Good security habits for the ACER ASPIRE GO 14 AG14-32P to reduce cybercrime risk:

• Protect your accounts with strong, unique passwords that use a combination of at least 10 uppercase and lowercase letters, symbols and numbers.
• Don’t click on random links or open unsolicited messages and attachments-particularly from people you don’t know.
• Don’t access any personal information or social media accounts over unprotected Wi-Fi networks.
• Use security software on your devices to help protect yourself from the latest threats.

To ensure software is up to date on the ACER ASPIRE GO 14 AG14-32P, perform any and all software updates as soon as they are available. Windows can check for important updates for your computer and install them automatically if you have an active internet connection. These updates include security patches and program updates that can improve your computing experience and help protect your computer against new viruses and attacks.

If the power is turned on but the ACER ASPIRE GO 14 AG14-32P does not start or boot up, check the following:

• Check if power is being supplied to the computer (if your computer has a power indicator, it will be off); if there is no power, check the following:
• If you are using on the battery, it may be low and unable to power the computer. Connect the AC adapter to recharge the battery pack. You may need to wait a few minutes before trying to turn your computer on again.
• Make sure that the AC adapter is properly plugged into the computer and to the power outlet.
• If power is being supplied to the computer, check the following:
• Do you have a USB storage device (USB drive, CD drive or smartphone) plugged into your computer? Unplug it and press Ctrl + Alt + Del to restart the system.

If nothing appears on the screen of the ACER ASPIRE GO 14 AG14-32P, note that the computer’s power management system automatically blanks the screen to save power. Press any key to turn the display back on. If pressing a key does not turn the display back on, three things might be the cause:

• The brightness level might be too low. Use the Brightness up hotkey to adjust the brightness level.
• The display device might be set to an external monitor. Press the display toggle hotkey to toggle the display back to the computer.
• The computer may be in Sleep or Hibernate mode (if there is a power LED, it will flash). Press and release the power button to resume.

If no audio is heard from the ACER ASPIRE GO 14 AG14-32P, check the following:

• The volume may be muted. Look at the volume control (speaker) icon in the taskbar. If it is crossed-out, click the icon and drag the slider to the right to increase the volume.
• The volume level may be too low. Check the volume from the volume control (speaker) icon in the taskbar. You can also use the volume control hotkeys to adjust the volume.
• If headphones, earphones or external speakers are connected to the headphone jack on the computer, the internal speakers automatically turn off.

If the keyboard does not respond on the ACER ASPIRE GO 14 AG14-32P, try attaching an external keyboard to a USB port on the computer. If it works, contact your dealer or an authorized service center as the internal keyboard cable may be loose.

If the printer does not work with the ACER ASPIRE GO 14 AG14-32P, check the following:

• Make sure that the printer is connected to a power outlet and that it is turned on.
• Make sure that the printer cable is connected securely to a USB port and the corresponding port on the printer.

Before performing a restore operation to its original settings on the ACER ASPIRE GO 14 AG14-32P, please check the BIOS settings. If there is a D2D Recovery setting in Main, make sure it is Enabled. Then exit the BIOS utility and save changes. The system will reboot.

The corrective actions for specific error messages on the ACER ASPIRE GO 14 AG14-32P are:

If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance.

To connect the ACER ASPIRE GO 14 AG14-32P to the internet, you should first select an Internet Service Provider (ISP), which supplies the connection between your computer and the internet. The ISP will provide instructions on how to connect to the internet (you may need additional software or a special ‘box’ that connects to your phone line).

To perform a Single-finger slide on the Precision Touchpad of the ACER ASPIRE GO 14 AG14-32P, slide a finger across the touchpad to move the cursor.

To perform a Single-finger press or tap on the Precision Touchpad of the ACER ASPIRE GO 14 AG14-32P, press the touchpad down, or lightly tap the touchpad with your finger, to perform a ‘click’, which will select or start an item. Quickly repeat the tap to perform a double tap or ‘double click’.

To perform a Two-finger press (right click) on the Precision Touchpad of the ACER ASPIRE GO 14 AG14-32P, lightly tap the touchpad with two fingers. In the Start screen, this will toggle the app commands. In most apps this will open a context menu related to the selected item.

To perform a Two-finger slide (scroll) on the Precision Touchpad of the ACER ASPIRE GO 14 AG14-32P, swiftly scroll through web pages, documents and playlists by placing two fingers on the touchpad and moving both in any direction.

To perform a Two-finger pinch (zoom) on the Precision Touchpad of the ACER ASPIRE GO 14 AG14-32P, zoom in and out of photos, maps and documents with a simple finger-and-thumb gesture.

To perform a Three-finger swipe for Task View on the Precision Touchpad of the ACER ASPIRE GO 14 AG14-32P, swipe across the touchpad with three fingers:

• Swipe up to open Task View. Move the cursor over a window and tap the touchpad to select that window, or swipe downwards to exit Task View.
• Swipe down to minimize all open windows and show Desktop; swipe upwards to restore the minimized windows.
• Swipe left or right to switch between open windows.

To perform a Four-finger swipe for Task View on the Precision Touchpad of the ACER ASPIRE GO 14 AG14-32P, swipe across the touchpad with four fingers:

• Swipe up to open Task View. Move the cursor over a window and tap the touchpad to select that window, or swipe downwards to exit Task View.
• Swipe down to minimize all open windows and show Desktop; swipe upwards to restore the minimized windows.

To activate hotkeys on the ACER ASPIRE GO 14 AG14-32P, press and hold the Fn key before pressing the other key in the hotkey combination.

Note: To swap the hotkey and special function of the F1 to F12 keys, change the function key setting in the BIOS (to open the BIOS press F2 when starting your computer, then select the Main menu and change Function key behavior to Function keys).

Special key functions on the keyboard of the ACER ASPIRE GO 14 AG14-32P:

For the Windows OS Desktop on the ACER ASPIRE GO 14 AG14-32P:

• To make an app appear on Start: If you’re in all apps list and you want to make an app appear on Start, right-click an app and select Pin to Start.
• To remove an app from Start: Right-click an app to select it and select Unpin from Start to remove the app from Start.
• To make an app appear on your taskbar: If you’re in all apps list and you want to make an app appear on the taskbar, right-click an app and select More > Pin to taskbar.

To check for Windows updates on the ACER ASPIRE GO 14 AG14-32P, press the Windows key or select the Windows Start button > Settings > Windows Update. Select Advanced options to configure the settings.

To turn off notifications on the ACER ASPIRE GO 14 AG14-32P, press the Windows key or select the Windows Start button and select Settings > System > Notifications. From here you can enable/disable notifications for all of your apps or choose which apps to enable/disable.