ABBYSON ITABLE MINI (01) PDF MANUAL

ABBYSON ITABLE MINI (01) PDF SUMMARY:

How do I power the device ON/OFF?

Touch the power button. When the power is ON, all switch LEDs will illuminate.

---

What are the audio control options?

The audio control panel includes Bluetooth, Play/Pause, Previous Track, Next Track, Volume -, Volume +, and Headphone Jack.

---

Where do I connect my smart device?

Connect your smart device to the USB outlet.

---

What does the Bluetooth indicator do?

• Flashes quickly when it is standby for Bluetooth paring.
• Flashes slowly when it searches for another ITABLE® Mini.
• Keeps illuminating when it is paired successfully.

---

Where is the audio player speaker located?

See the PDF for the location of the audio player speaker.

---

How do I pair one ITABLE® Mini to another one?

Touch and hold the button to pair one ITABLE® Mini to another one.

---

How do I cut off the Bluetooth connection between two iTobe minis?

Touch and hold the button.

---

How do I play or pause?

Touch the button on top to play or pause.

---

How do I disconnect the Bluetooth connection with the previous device?

Touch and hold the button on top.

---

How do I select the previous track and decrease the volume?

Touch the button.

---

How do I select the next track and increase the volume?

Touch the button.

---

How do I pair ITABLE® Mini to a smart device?

1. Power ON the device by holding the power button.
2. Go to your device setting, search for “Bluetooth” setting.
3. Select “ITABLE® Mini” from the list of devices.
4. ITABLE® Mini will announce “Paired-Speaker Connected”.

---

How do I pair two ITABLE® Minis?

1. Touch and hold both ITABLE® Mini buttons for a few seconds; the indicators will flash slowly, then the minis will connect.
2. The ITABLE® Minis will announce “Paired”.

---

How do I use the wireless charging pad?

Place your cell phone on the ITABLE® Mini to charge the phone automatically. If it is charging, there will be a solid blue LED ring.

• Solid blue LED ring: Charging
• Blue LED ring flashes: There is interference nearby or it doesn’t work well

---

What should I do if there is no power?

1. Ensure the unit is powered on by touching and holding the power button.
2. Ensure the power cord is plugged in properly. Re-plug it.

---

What should I do if there is no sound at all?

1. Ensure the volume is not at the minimum setting. Touch the volume up button to increase the volume.
2. Ensure the unit is not at headphone setting. Unplug the headphone.

---

What should I do if the Bluetooth can not be paired?

1. It may have been connected to another device. Touch and hold the Bluetooth button to disconnect the previous device, then try to connect it.
2. Your device might be out of range.

---

What should I do if the AUX mode is not working?

1. Your device may not support this kind of AUX jack.
2. The Aux cable may be broken. Try another one.

---

What should I do if the wireless charging pad doesn’t work?

1. Your device does not support wireless charging.
2. Check that your phone is aligned with the wireless charging pad.