AAXA TECHNOLOGIES P3X (01) PDF Document

Please use the AAXA TECHNOLOGIES P3X product as instructed. Misuse may cause injury or death. Do not use while driving. Do not expose to water or wet surfaces, as electric shock may occur. Do not expose the projected LED image to your eyes or the eyes of others. Do not block or restrict airflow from ventilation holes, as this may cause the projector to overheat. Keep the projector, battery, or charger away from any heat sources.

Prolonged use at high volume may impair your hearing. High volume during walking or driving may cause distractions and result in injury or death.

Do not pierce or puncture the battery with sharp objects. Do not heat the product or expose it to high temperature. Do not wet it or place it in any liquid.

1. If using a power supply, connect the power adapter to the AAXA TECHNOLOGIES P3X. If running the AAXA TECHNOLOGIES P3X on battery power, proceed to step 3.

2. Plug the opposite end of the power cord into a wall outlet.

3. Press the POWER button on the keypad and hold for 2-3 seconds to start the projector.

1. Press and hold the power button on the keypad for 3 seconds.

2. The optical engine should power off and the fan should stop spinning.

The AAXA TECHNOLOGIES P3X Projector battery does not charge when it is in operation.

Located beside the projector lens, turn the focus wheel left or right until the image becomes clear.

The throw distance chart for the AAXA TECHNOLOGIES P3X is as follows:

Step 1: Connect one end of the HDMI Cable to your computer’s HDMI port.

Step 2: Connect the mini-HDMI end to your AAXA TECHNOLOGIES P3X’s HDMI port.

Step 3: In the Main Menu, select the “Input” icon. Then select the “HDMI” icon.

Step 4: Enabling HDMI output on your Computer – To enable HDMI output on your computer, most computers require “turning on” the video output feature. Each computer is different. Please consult your owner’s manual for instructions to enable HDMI output. Below are standard instructions for a Windows XP computer – not all systems are the same.

Step 5: Press function & “F5” to instruct the computer to enable multiple displays. You can also press Windows+P to toggle through display settings.

Step 6:

1. Right click on computer desktop and select “Properties”

2. Display Properties window will pop up

3. Click on the “Settings” Tab

4. If a secondary monitor is grayed out, click on it and check “Extend my Windows Desktop onto this monitor”

5. If the image is blurry or the text is not legible, adjust the screen resolution. We recommend 1280×800.

Step 1: Connect the 3.5mm A/V Cable to the back of the AAXA TECHNOLOGIES P3X.

Step 2: Connect the composite end of the AV Cable (Red, White, Yellow) to your device.

Step 3: In the main menu, select the “Inputs” icon.

Step 4: Turn on your multimedia device and select the “Composite A/V” icon.

The AAXA TECHNOLOGIES P3X supports most multimedia devices. The unit can connect to Apple iDevices, Android base smart devices, Cameras, Video game consoles, and other peripherals. Apple products will require a separate adapter depending on your device. Smartphones require video out capabilities to be displayed with the AAXA TECHNOLOGIES P3X.

Step 1: Connect your speakers/headphones to the projector’s 3.5mm audio port.

Step 2: Ensure both the projector and the headphones are powered on.

Step 3: Adjust the sound volume as necessary.

Slide your MicroSD into the spring loaded SD Card Slot (text facing up as shown). Gently slide the drive until it cannot go in any further.

Insert your Micro SD into the projector. Use the navigation pad to choose one of the Media icons (Video, Music, Pictures, Text Files) USB Drive icon from the main menu to access your files.

Microsoft Office and PDF file formats are not supported by the AAXA TECHNOLOGIES P3X. To view a slideshow, save your PPT presentation to a JPEG picture format.

Connect your USB Drive into a USB adapter. Gently slide the drive until it cannot go in any further.

Insert your USB Drive into the projector. Use the navigation pad to choose one of the Media icons (Video, Music, Pictures, Text Files) USB Drive icon from the main menu to access your files.

To start charging, simply connect your device to the AAXA TECHNOLOGIES P3X’s USB port (The AAXA TECHNOLOGIES P3X must be turned on to charge a USB device). The AAXA TECHNOLOGIES P3X is capable of charging a typical smartphone 3 or 4 times before needing a recharge. The AAXA TECHNOLOGIES P3X is capable of delivering a maximum charge amperage of 500ma. Charging a device will drain the battery in the AAXA TECHNOLOGIES P3X projector.

Press the left and right directional buttons to choose an icon from the main menu. To select a menu option, press the “OK” button in the middle of the navigation pad. To go back to the previous screen, press the “Back” button. To jump back to the submenu, press the “Menu” button once. To return to the main menu, press and hold the “Menu” button.

From the main menu, select the “Video” icon. Select either the MicroSD or USB icon to view the stored files. Choose which file you wish to play.

Press the directional keys to highlight the item of interest. Wait 2-3 seconds and a preview of the video will show on the screen.

To adjust the volume, use the Up and Down button on the projector. To navigate to the playback menu, push the “OK” button to open the menu and use the left or right directional buttons on the navigation pad or remote to highlight the option you wish to choose. To open/hide the video playback menu, use the “OK” and “Back” Buttons on the projector.

1. Choose either USB or SD Card for playback.

2. Navigate the folders until you reach the file you wish to play.

3. Highlight the file you want to play, then confirm the selection.

4. Move selection on video player menu to “repeat”, and confirm the selection.

5. The video will now loop after playback is finished.

1. Choose the “video” option from the main menu.

2. Navigate using either remote or onboard buttons to the file you wish to preview.

3. Highlight the file. Do not select the file, just highlight it.

4. Wait for 3-4 seconds.

5. A preview screen will pop up on the lower right for the video.

Select where the files are located from the main menu. Select the “Photo” icon. Choose which file you wish to play.

Press the directional keys to highlight the item of interest. Wait 2-3 seconds and a preview of the picture will show on the screen.

To navigate the in playback menu, push the “OK” button to open the menu and use the left and right directional buttons on the navigation pad or remote control to highlight the option you wish to choose. To open/hide the photo playback menu, use the “OK” and “Back” button on the projector.

1. Choose either USB or SD Card for playback.

2. Navigate to the folder that contains the pictures you wish to see in the slideshow.

3. Confirm selection of the first picture.

4. Press “play” in the photo menu.

5. Slideshow will now play.

6. Selecting “repeat” will loop slideshow.

1. After selecting the photo you wish to be displayed, you can press “play” to start the slideshow (as outlined in the previous FAQ).

2. To manually control the slideshow, you must stop the slideshow with the “stop” button.

3. You may use either the controls on your remote or on top of the projector itself to flip through the pictures in the current playlist.

From the main menu, select the “Music” icon. Select either the MicroSD or USB icon to view the stored files. Choose which file you wish to play.

Press the directional keys to highlight the item of interest. Wait 2-3 seconds and a preview of the audio will show on the screen.

To adjust the volume, use the Up and Down button on the projector. To navigate to the playback menu, push the “OK” button to open the menu and use the left or right directional buttons on the navigation pad or remote to highlight the option you wish to choose. To open/hide the music playback menu, use the “OK” and “Back” button on the projector.

1. Choose either USB or SD Card for playback.

2. Navigate the folders until you reach the file you wish to play.

3. Highlight the file you want to play, then confirm the selection.

4. Move selection on music player menu to “repeat”, and confirm the selection.

5. The song will now loop after playback is finished.

1. Insert your media device (either microSD card or USB) into computer.

2. Make a new folder on media device (folder name will be the name of the playlist).

3. Transfer songs from computer to the new folder, name accordingly.

4. Remove media device from computer and insert into projector.

5. Navigate to Audio section, then choose appropriate media device.

6. Navigate to your playlist folder.

7. Start at first song.

8. Playback will follow each successive song on the list.

To create a special order for the list, add numerical numbering to the beginning of each file.

Select where the files are located from the main menu. Select the “EBook” icon. Choose which file you wish to play.

The AAXA TECHNOLOGIES P3X Pico Projector allows you to view text files. Select the file you want to view in the file menu for the particular storage device on which the file is stored. You can press the left and right arrow buttons on the directional pad to flip through the pages you have in the present folder.

Picture Mode: Changes the picture mode.

Color Temperature: Adjusts the color temperature from hot to cold (red to blue).

Aspect Ratio: Changes the aspect ratio of the picture – 4:3, 16:9*. Some pictures may be cut off when aspect ratio is set incorrectly. Native aspect is 16:9.

Backlight: Adjusts the backlight (not used).

Sound Mode: Change the sound mode depending on what is currently playing.

Modes: Standard, Music, Movie, Sports, User.

Clock: Adjust the time/date.

Off Time: (not used)

On Time: (not used)

Sleep Timer: (not used)

Auto Sleep: (not used)

OSD Language: Changes the language of the device. English, Spanish, French, German, Portuguese, Chinese.

Restore Factory Default: Restores the projector to factory settings (erases all settings).

Blending: Adjusts the blending option.

OSD Duration: Allows the projector to set a duration for the selected OSD language.

If the projector is not in focus, adjust the focus with the focus adjustment dial until the image comes into focus. If the projector is offset from the plane/angle of operation, move the projector so that it is both 180 degrees and on an even plane with the screen.

Be sure to set up the computer to enable a video signal output. On some laptops, this is done by pressing and holding the Function F5 key. If using the AAXA TECHNOLOGIES P3X as an external monitor on Windows-based systems, this can be done by selecting “extend my desktop to this monitor”. The native resolution of the AAXA TECHNOLOGIES P3X projector is 854×480. Depending on the video driver, different resolutions may need to be selected for proper output.

If there is no power, check to ensure the power outlet or battery source is good. Check the power adapter to ensure a proper connection with the wall outlet as well as the projector. Confirm that the unit is charged and has enough power. If the power button was not held long enough, to power on the projector, the power button needs to be depressed for a full 3 seconds. Try holding the power button until the optical engine turns on.

If the video source is not properly connected or selected, check the video source signal to ensure that it is properly connected. Select the current input source by choosing the input desired from the main menu. If there is an incorrect file extension / video is encoded with an incorrect codec, please refer to the “Specifications” page to see which file types and codecs are supported. Verify that the file was encoded properly.

Brightness: 85 Lumens

Native Resolution: 854×480(WXGA)

Maximum Resolution: 1280×800(WXGA)

Contrast Ratio: 1000:1

Projection Lens: Manual Focus

Image Size: 10~100 inches

Lamp: Triple RGB LEDs with Vibrant Color Technology – 20,000hrs Lamp Life

Video Input: Composite A/V, HDMI (mini-HDMI)

Audio Output: 1.0 W stereo speaker, 3.5 mm audio jack

Battery Life: 120 Minutes

SD Card: MicroSD Card Slot (32GB maximum)

USB: USB Host (Memory Sticks)

Dimensions: 142x74x24mm

Weight: 0.4 lbs (170g)

Supported File Formats: AVI, MPG, MP4, MP3, FLV, RMVB, RM, JPG, TXT