FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF DOCUMENT.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF USER GUIDE.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF USER MANUAL.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF OWNER GUIDE.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF OWNER MANUAL.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF REFERENCE GUIDE.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF REFERENCE MANUAL.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH HIGHPOINT TECHNOLOGIES RR840 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD HIGHPOINT TECHNOLOGIES RR840 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the HIGHPOINT TECHNOLOGIES RR840 kit?
The HIGHPOINT TECHNOLOGIES RR840 kit contains the following items:
• RAID Controller Card
• Low Profile Bracket
• Quick Installation Guide
What operating systems are compatible with the HIGHPOINT TECHNOLOGIES RR840?
The HIGHPOINT TECHNOLOGIES RR840 supports the following operating systems:
• Windows 11, 10, 8, 7 / Server 2022, 2019, 2016, 2012R2, 2008 / Microsoft Hyper-V
• RHEL/Ubuntu/Debian/Fedora/Proxmox (Linux kernel 3.10 and later)
• Arch Linux (Kernel 5.17.5 and above)
• macOS 10.9 ~ macOS 13.x
What cables are required to connect SATA drives to the HIGHPOINT TECHNOLOGIES RR840?
To use SATA drives with the HIGHPOINT TECHNOLOGIES RR840 RAID controller, you will need at least one 8643-4SATA-1M cable. Each cable can support four SATA hard drives or SSD’s via an SFF-8643 port.
What cables are required to connect SAS/SATA drives to the HIGHPOINT TECHNOLOGIES RR840?
To use SAS/SATA drives with the HIGHPOINT TECHNOLOGIES RR840 RAID controller, you will need at least one 8643-4SAS-1M cable. Each cable can support up to four SAS/SATA hard drives or SSD’s via an SFF-8643 port.
What is the port and channel layout for the HIGHPOINT TECHNOLOGIES RR840?
The front view of the HIGHPOINT TECHNOLOGIES RR840 shows four ports. The channel assignments, from the bottom port to the top port, are as follows:
• Channels 1-4
• Channels 5-8
• Channels 9-12
• Channels 13-16
How do I install the HIGHPOINT TECHNOLOGIES RR840 and connect SATA drives?
Note: Make sure the system is powered-off before installing the RAID Controller.
1. Connect the HIGHPOINT TECHNOLOGIES RR840 into the PCIe 3.0/4.0 x8 or x16 slot of the motherboard.
2. To connect disks to the controller using the 8643-4SATA-1M cable:
– Plug the SFF-8643 connector into a port on the RAID controller.
– Connect the individual SATA data connectors to your SATA drives.
– Connect SATA power connectors from your power supply unit to the SATA drives.
How do I connect SAS/SATA drives to the HIGHPOINT TECHNOLOGIES RR840?
To connect SAS/SATA disks using the 8643-4SAS-1M cable, follow these steps. Each cable can support up to four SAS/SATA hard drives or SSDs via an SFF-8643 port.
1. Plug the SFF-8643 connector into a port on the HIGHPOINT TECHNOLOGIES RR840 controller.
2. Connect the other ends of the cable, which are SFF-8642 connectors, to your SAS/SATA drives.
3. Connect a SAS power connector from your power supply unit to the drives.
What optional certified cable accessories are available for the HIGHPOINT TECHNOLOGIES RR840?
| Device Cables | Description |
|---|---|
| 8643-4SAS-1M | 1M SFF-8643 SAS to 4x SFF-8482 SAS cable. Length: 1M |
| 8643-4SATA-1M | SFF-8643 SAS to 4x SATA cable, with Power Connector. Length: 1M |
CLICK HERE TO DOWNLOAD HIGHPOINT TECHNOLOGIES RR840 (01) PDF DOCUMENT