Free English YORKVILLE M810 YS1033 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD YORKVILLE M810 YS1033 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the important safety instructions for using the YORKVILLE M810 YS1033?
When using your YORKVILLE M810 YS1033, basic precautions should always be followed, including:
Instructions: Read and understand the Owner’s Manual before operation. Save these instructions for future reference and heed all warnings.
Cleaning: Clean only with a dry cloth.
Environment: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not use this apparatus near water.
Power Sources: Your unit should be connected to a power source only of the voltage specified in the owner’s manual or as marked on the unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme on the unit is not defeated. An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing ground.
Hazards: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious personal injury and serious damage. Use only with accessories recommended by the manufacturer. Prolonged use of headphones at a high volume may cause health damage. The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus. Terminals marked with the “lightning bolt” are hazardous live; external wiring connected to these terminals requires installation by an instructed person or the use of ready-made leads or cords.
Ventilation and Heat: Ensure that proper ventilation is provided around the appliance. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.
Power Cord: Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. Protect the power cord from being walked on or pinched, particularly at plugs. If the AC supply cord is damaged, DO NOT OPERATE THE UNIT. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
General Use: Unplug this apparatus during lightning storms or when unused for long periods of time.
Service: The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
How do I properly set the Trim control on my YORKVILLE M810 YS1033?
To set the Trim control on your YORKVILLE M810 YS1033, turn up the Trim control until the green LED starts to blink.
What are the Stereo Digital Effects available on the YORKVILLE M810 YS1033 (Series 1)?
The YORKVILLE M810 YS1033 (Series 1) features 255 presets organized into the following categories:
A: ROOMS
| 1 | 0.5s Bright Small Room |
| 2 | 0.5s Warm Small Room |
| 3 | 0.5s Dark Small Room |
| 4 | 0.8s Bright Small Room |
| 5 | 0.8s Warm Small Room |
| 6 | 1.0s Bright Small Room |
| 7 | 1.0s Warm Small Room |
| 8 | 1.2s Bright Medium Room |
| 9 | 1.2s Warm Medium Room |
| 10 | 1.5s Bright Medium Room |
| 11 | 1.5s Warm Medium Room |
| 12 | 1.5s Dark Medium Room |
| 13 | 2.0s Bright Large Room |
| 14 | 2.0s Warm Large Room |
| 15 | 2.5s Bright Large Room |
| 16 | 2.5s Warm Large Room |
B: ROOMS & THICKENING DELAYS
| 1 | 0.5s Bright Small Room + 50ms doubling delay |
| 2 | 0.5s Warm Small Room + 40ms doubling delay |
| 3 | 0.5s Dark Small Room + 40ms doubling delay |
| 4 | 0.8s Bright Small Room + 60ms doubling delay |
| 5 | 0.8s Warm Small Room + 50ms doubling delay |
| 6 | 1.0s Bright Small Room + 70ms slap delay |
| 7 | 1.0s Warm Small Room + 50ms doubling delay |
| 8 | 1.2s Bright Medium Room + 50ms doubling delay |
| 9 | 1.2s Warm Medium Room + 50ms doubling delay |
| 10 | 1.5s Bright Medium Room + 80ms slap delay |
| 11 | 1.5s Warm Medium Room + 60ms doubling delay |
| 12 | 1.5s Dark Medium Room + 70ms slap delay |
| 13 | 2.0s Bright Large Room + 80ms slap delay |
| 14 | 2.0s Warm Large Room + 60ms doubling delay |
| 15 | 2.5s Bright Large Room + 100ms slap delay |
| 16 | 2.5s Warm Large Room + 80ms slap delay |
C: ROOMS & REGENERATION DELAYS
| 1 | 0.5s Bright Small Room + 200ms regen delay |
| 2 | 0.5s Warm Small Room + 175ms regen delay |
| 3 | 0.5s Dark Small Room + 150ms regen delay |
| 4 | 0.8s Bright Small Room + 200ms regen delay |
| 5 | 0.8s Warm Small Room + 150ms regen delay |
| 6 | 1.0s Bright Small Room + 175ms regen delay |
| 7 | 1.0s Warm Small Room + 125ms regen delay |
| 8 | 1.2s Bright Medium Room + 150ms regen delay |
| 9 | 1.2s Warm Medium Room + 200ms regen delay |
| 10 | 1.5s Bright Medium Room + 200ms regen delay |
| 11 | 1.5s Warm Medium Room + 175ms regen delay |
| 12 | 1.5s Dark Medium Room + 150ms regen delay |
| 13 | 2.0s Bright Large Room + 200ms regen delay |
| 14 | 2.0s Warm Large Room + 125ms regen delay |
| 15 | 2.5s Bright Large Room + 150ms regen delay |
| 16 | 2.5s Bright Large Room + 200ms regen delay |
D: ROOMS/HALLS & CHORUS
| 1 | 0.5s Bright Room + slow chorus |
| 2 | 0.8s Warm Room + medium chorus |
| 3 | 1.0s Bright Room + slow chorus |
| 4 | 1.2s Warm Room + medium chorus |
| 5 | 1.5s Bright Room + slow chorus |
| 6 | 1.8s Warm Room + slow chorus |
| 7 | 2.5s Bright Room + medium chorus |
| 8 | 3.0s Warm Room + slow chorus |
| 9 | 2.0s Bright Hall + slow chorus |
| 10 | 2.5s Warm Hall + medium chorus |
| 11 | 2.5s Bright Hall + slow chorus |
| 12 | 3.0s Warm Hall + slow chorus |
| 13 | 3.5s Warm Hall + slow chorus |
| 14 | 3.5s Bright Hall + medium chorus |
| 15 | 5.0s Warm Hall + slow chorus |
| 16 | 8.0s Warm Hall + slow chorus |
E: HALLS
| 1 | 1.5s Dark Medium Hall |
| 2 | 1.5s Warm Medium Hall |
| 3 | 1.5s Bright Medium Hall |
| 4 | 2.0s Dark Medium Hall |
| 5 | 2.0s Warm Medium Hall |
| 6 | 2.0s Bright Medium Hall |
| 7 | 2.5s Dark Medium Hall |
| 8 | 2.5s Warm Medium Hall |
| 9 | 2.5s Bright Medium Hall |
| 10 | 3.5s Dark Medium Hall |
| 11 | 3.5s Warm Medium Hall |
| 12 | 3.5s Bright Medium Hall |
| 13 | 5.0s Dark Large Hall |
| 14 | 5.0s Warm Large Hall |
| 15 | 8.0s Dark Huge Hall |
| 16 | 8.0s Warm Huge Hall |
F: HALLS & THICKENING DELAYS
| 1 | 1.5s Dark Medium Hall + 50ms doubling delay |
| 2 | 1.5s Warm Medium Hall + 70ms slap delay |
| 3 | 1.5s Bright Medium Hall + 90ms slap delay |
| 4 | 2.0s Dark Medium Hall + 90ms slap delay |
| 5 | 2.0s Warm Medium Hall + 70ms slap delay |
| 6 | 2.0s Bright Medium Hall + 50ms doubling delay |
| 7 | 2.5s Dark Medium Hall + 70ms slap delay |
| 8 | 2.5s Warm Medium Hall + 80ms slap delay |
| 9 | 2.5s Bright Medium Hall + 100ms slap delay |
| 10 | 3.5s Dark Medium Hall + 80ms slap delay |
| 11 | 3.5s Warm Medium Hall + 90ms slap delay |
| 12 | 3.5s Bright Medium Hall + 100ms slap delay |
| 13 | 5.0s Dark Large Hall + 80ms slap delay |
| 14 | 5.0s Bright Large Hall + 100ms slap delay |
| 15 | 8.0s Dark Huge Hall + 100ms slap delay |
| 16 | 8.0s Warm Huge Hall + 100ms slap delay |
G: HALLS & REGENERATION DELAYS
| 1 | 1.5s Dark Medium Hall + 150ms regen delay |
| 2 | 1.5s Warm Medium Hall + 175ms regen delay |
| 3 | 1.5s Bright Medium Hall + 200ms regen delay |
| 4 | 2.0s Dark Medium Hall + 200ms regen delay |
| 5 | 2.0s Warm Medium Hall + 150ms regen delay |
| 6 | 2.0s Bright Medium Hall + 175ms regen delay |
| 7 | 2.5s Dark Medium Hall + 200ms regen delay |
| 8 | 2.5s Warm Medium Hall + 150ms regen delay |
| 9 | 2.5s Bright Medium Hall + 175ms regen delay |
| 10 | 3.5s Dark Medium Hall + 125ms regen delay |
| 11 | 3.5s Dark Medium Hall + 150ms regen delay |
| 12 | 3.5s Bright Medium Hall + 200ms regen delay |
| 13 | 5.0s Dark Large Hall + 175ms regen delay |
| 14 | 5.0s Bright Large Hall + 200ms regen delay |
| 15 | 8.0s Dark Large Hall + 150ms regen delay |
| 16 | 8.0s Bright Large Hall + 200ms regen delay |
H: GATED/REVERSE REVERB
| 1 | 0.8s decay 100ms Gate |
| 2 | 0.8s decay 200ms Gate |
| 3 | 1.2s decay 100ms Gate |
| 4 | 1.2s decay 200ms Gate |
| 5 | 1.8s decay 150ms Gate |
| 6 | 1.8s decay 200ms Gate |
| 7 | 2.0s decay 300ms Gate |
| 8 | 2.0s decay 300ms Gate |
| 9 | 2.5s decay 250ms Gate |
| 10 | 2.5s decay 400ms Gate |
| 11 | 0.5s decay 100ms Reverse |
| 12 | 0.5s decay 200ms Reverse |
| 13 | 1.0s decay 100ms Reverse |
| 14 | 1.0s decay 200ms Reverse |
| 15 | 2.5s decay 250ms Reverse |
| 16 | 4.0s decay 300ms Reverse |
I: CHAMBERS/PLATES
| 1 | 0.8s Warm Chamber |
| 2 | 0.8s Bright Chamber |
| 3 | 1.2s Warm Chamber |
| 4 | 1.2s Bright Chamber |
| 5 | 1.5s Warm Chamber |
| 6 | 1.5s Bright Chamber |
| 7 | 2.5s Warm Chamber |
| 8 | 2.5s Bright Chamber |
| 9 | 3.5s Warm Chamber |
| 10 | 3.5s Bright Chamber |
| 11 | 0.3s Bright Plate |
| 12 | 0.5s Bright Plate |
| 13 | 0.8s Bright Plate |
| 14 | 1.2s Bright Plate |
| 15 | 1.5s Bright Plate |
| 16 | 2.0s Bright Plate |
J: CHAMBERS/PLATES + THICKENING DELAYS
| 1 | 0.8s Warm Chamber + 50ms doubling delay |
| 2 | 0.8s Bright Chamber + 50ms doubling delay |
| 3 | 1.2s Warm Chamber + 60ms doubling delay |
| 4 | 1.2s Bright Chamber + 70ms slap delay |
| 5 | 1.5s Warm Chamber + 70ms slap delay |
| 6 | 1.5s Bright Chamber + 80ms slap delay |
| 7 | 2.5s Warm Chamber + 80ms slap delay |
| 8 | 2.5s Bright Chamber + 100ms slap delay |
| 9 | 3.5s Warm Chamber + 90ms slap delay |
| 10 | 3.5s Bright Chamber + 100ms slap delay |
| 11 | 0.3s Bright Plate + 40ms doubling delay |
| 12 | 0.5s Bright Plate + 50ms doubling delay |
| 13 | 0.8s Bright Plate + 50ms doubling delay |
| 14 | 1.2s Bright Plate + 80ms slap delay |
| 15 | 1.5s Bright Plate + 80ms slap delay |
| 16 | 2.0s Bright Plate + 100ms slap delay |
K: CHAMBERS/PLATES + REGEN DELAYS
| 1 | 0.8s Warm Chamber + 150ms regen delay |
| 2 | 0.8s Bright Chamber + 125ms regen delay |
| 3 | 1.2s Warm Chamber + 175ms regen delay |
| 4 | 1.2s Bright Chamber + 200ms regen delay |
| 5 | 1.5s Warm Chamber + 150ms regen delay |
| 6 | 1.5s Bright Chamber + 200ms regen delay |
| 7 | 2.5s Warm Chamber + 175ms regen delay |
| 8 | 2.5s Bright Chamber + 125ms regen delay |
| 9 | 3.5s Warm Chamber + 200ms regen delay |
| 10 | 3.5s Bright Chamber + 150ms regen delay |
| 11 | 0.3s Bright Plate + 125ms regen delay |
| 12 | 0.5s Bright Plate + 150ms regen delay |
| 13 | 0.8s Bright Plate + 200ms regen delay |
| 14 | 1.2s Bright Plate + 175ms regen delay |
| 15 | 1.5s Bright Plate + 150ms regen delay |
| 16 | 2.0s Bright Plate + 200ms regen delay |
L: SHORT DELAYS
| 1 | 30ms slap delay |
| 2 | 35ms slap delay |
| 3 | 40ms slap delay |
| 4 | 50ms slap delay |
| 5 | 60ms slap delay |
| 6 | 70ms slap delay |
| 7 | 80ms slap delay |
| 8 | 90ms slap delay |
| 9 | 100ms slap delay |
| 10 | 100ms regen delay |
| 11 | 125ms low regen delay |
| 12 | 125ms medium regen delay |
| 13 | 150ms low regen delay |
| 14 | 150ms medium regen delay |
| 15 | 175ms low regen delay |
| 16 | 175ms medium regen delay |
M: MEDIUM DELAYS
| 1 | 200ms low regen delay |
| 2 | 200ms medium regen delay |
| 3 | 225ms low regen delay |
| 4 | 225ms medium regen delay |
| 5 | 250ms low regen delay |
| 6 | 250ms medium regen delay |
| 7 | 275ms low regen delay |
| 8 | 275ms medium regen delay |
| 9 | 300ms low regen delay |
| 10 | 300ms medium regen delay |
| 11 | 325ms low regen delay |
| 12 | 325ms medium regen delay |
| 13 | 350ms low regen delay |
| 14 | 350ms medium regen delay |
| 15 | 375ms low regen delay |
| 16 | 375ms medium regen delay |
N: LONG DELAYS
| 1 | 390ms low regen delay |
| 2 | 390ms medium regen delay |
| 3 | 400ms low regen delay |
| 4 | 400ms medium regen delay |
| 5 | 410ms low regen delay |
| 6 | 410ms medium regen delay |
| 7 | 420ms low regen delay |
| 8 | 420ms medium regen delay |
| 9 | 430ms low regen delay |
| 10 | 430ms medium regen delay |
| 11 | 450ms low regen delay |
| 12 | 450ms medium regen delay |
| 13 | 475ms low regen delay |
| 14 | 475ms medium regen delay |
| 15 | 500ms low regen delay |
| 16 | 500ms medium regen delay |
O: DELAYS & CHORUS
| 1 | 50ms doubling delay + slow chorus |
| 2 | 80ms slap delay + medium chorus |
| 3 | 100ms slap delay + medium chorus |
| 4 | 150ms regen delay + slow chorus |
| 5 | 175ms regen delay + medium chorus |
| 6 | 200ms regen delay + slow chorus |
| 7 | 225ms regen delay + medium chorus |
| 8 | 250ms regen delay + slow chorus |
| 9 | 275ms regen delay + medium chorus |
| 10 | 300ms regen delay + slow chorus |
| 11 | 325ms regen delay + medium chorus |
| 12 | 350ms regen delay + slow chorus |
| 13 | 370ms regen delay + medium chorus |
| 14 | 380ms regen delay + slow chorus |
| 15 | 390ms regen delay + medium chorus |
| 16 | 400ms regen delay + slow chorus |
P: SPECIAL EFFECTS
| 1 | Pitch Shift octave down |
| 2 | Pitch Shift octave up |
| 3 | Pitch Shift major 3rd up |
| 4 | Pitch Shift major 5th down |
| 5 | Dual Pitch Shift major 3rd and 5th up |
| 6 | Dual Pitch Shift octave up and octave down |
| 7 | Detune Flanger |
| 8 | Slow Flanger w/ medium regen |
| 9 | Slow Flanger w/ high regen |
| 10 | Medium Flanger w/ medium regen |
| 11 | Medium Flanger w/ high regen |
| 12 | 250ms high regen delay |
| 13 | 500ms medium regen delay |
| 14 | 500ms high regen delay |
| 15 | Slow Flanger + Pitch Shift octave down |
| 16 | Slow Flanger + Pitch Shift octave up |
What are the Digital Effects available on the YORKVILLE M810 YS1033 Series 2?
The YORKVILLE M810 YS1033 Series 2 features 16 digital effects. The “Modify” column indicates which parameter is adjusted by the Modify knob for that effect.
| Effect | Modify | Effect | Modify |
|---|---|---|---|
| 1. Room Reverb | decay | 9. Fast Echo | decay |
| 2. Hall Reverb | decay | 10. Short Decay Echo | delay |
| 3. Hall Reverb – Vocals | 11. Long Decay Echo | ||
| 4. Hall Reverb w/Echo | 12. Chorus | rate | |
| 5. Plate Reverb | decay | 13. Flanger | |
| 6. Plate Reverb – Vocals | 14. Rotary Speaker | ||
| 7. Plate Reverb w/Echo | 15. Distortion | gain | |
| 8. Gated Reverb | decay | 16. Harmonizer | pitch |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD YORKVILLE M810 YS1033 (01) PDF DOCUMENT
