Free English WORX WX318 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD WORX WX318 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the intended use for the WORX WX318 impact drill?
The WORX WX318 impact drill is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic.
What is the voltage and power input for the WORX WX318?
The voltage for the WORX WX318 is 230-240V~50Hz and the power input is 810W.
What are the no load speed and impact rate for the WORX WX318?
The no load speed for the WORX WX318 is 0-3000/min and the impact rate is 0-48000/min.
What is the chuck capacity and drilling capacity for the WORX WX318?
The chuck capacity for the WORX WX318 is 16 mm. The drilling capacities are:
- Masonry: 16 mm
- Wood: 32 mm
- Steel: 13 mm
What is the machine weight and protection class for the WORX WX318?
The machine weight for the WORX WX318 is 2.42kg and the protection class is /II.
What is the A-weighted sound pressure, A-weighted sound power, and KDA & KWA for the WORX WX318?
For the WORX WX318, the A-weighted sound pressure is LDA: 93.5dB(A), the A-weighted sound power is LWA: 104.5dB(A), and KDA & KWA is 3.0dB(A).
When should ear protection be worn when using the WORX WX318 impact drill?
Wear ear protection when sound pressure is over 80dB(A) for the WORX WX318.
What is the vibration emission value for impact drilling into concrete for the WORX WX318 according to EN 60745?
The vibration emission value (ahID) for impact drilling into concrete for the WORX WX318 is 9.217m/s², with an uncertainty K= 1.5m/s².
What is the vibration emission value for drilling into metal for the WORX WX318 according to EN 60745?
The vibration emission value (ahD) for drilling into metal for the WORX WX318 is 7.288m/s², with an uncertainty K= 1.5m/s².
What accessories are included with the WORX WX318 impact drill?
The standard delivery for the WORX WX318 includes the following accessories:
| Accessory | WX318 |
|---|---|
| Auxiliary handle | 1 |
| Depth gauge | 1 |
| HSS drill bit | 3 (5mm, 6mm, 8mm) |
| Masonry drill bit | 3 (6mm, 8mm, 10mm) |
How should the drill bit sharpness be checked for the WORX WX318 if the drill doesn’t work properly?
If the WORX WX318 drill doesn’t work properly, check the drill bit for sharpness and replace the drill bit if worn. Also, check that the drill is set to forward rotation for normal use.
What should be done if the WORX WX318 power tool becomes too hot?
If the WORX WX318 power tool becomes too hot, set the speed to maximum and run it no load for 2-3 minutes to cool the motor.
What should be done before carrying out any adjustment, servicing or maintenance on the WORX WX318?
Before carrying out any adjustment, servicing or maintenance on the WORX WX318, remove the plug from the socket.
How should the motor be cooled down during drilling tiles with the WORX WX318?
To drill tiles with the WORX WX318, select the drill/impact action selector switch to the “drill symbol” position to drill the tile. When the tile has been penetrated, switch over to the “hammer symbol” position.
How should steel be drilled using the WORX WX318?
To drill steel with the WORX WX318, select the drill/impact action selector switch to the “drill symbol” position. HSS drill bits should always be used for drilling steel with a lower speed.
How should masonry and concrete be drilled using the WORX WX318?
To drill masonry and concrete with the WORX WX318, select the drill/impact action selector switch to the “hammer symbol” position. Tungsten carbide drill bits should always be used for drilling masonry, concrete etc with a high speed.
What is the recommendation for drilling a large hole in tough material like steel with the WORX WX318?
When drilling a large hole in tough material such as steel with the WORX WX318, it is recommended to drill a small pilot hole first before using a large drill bit.
What is the warning regarding the forward/reverse rotation control lever on the WORX WX318?
Never move the forward/reverse switch whilst the WORX WX318 drill is in operation or the on/off switch is locked as this will damage the drill.
What should be done if the WORX WX318 power tool does not start?
If the WORX WX318 power tool does not start, check the plug on the power supply first.
CLICK HERE TO DOWNLOAD WORX WX318 (01) PDF DOCUMENT