WOMANIZER STARLET (01) PDF Document

Step 1. Press the C button for approximately 2 seconds to switch on the WOMANIZER STARLET. The device will start in soft mode.

Step 2. Spread the labia slightly to expose the clitoris. Apply the stimulation head B to the clitoris, applying light pressure so that the clitoris is enclosed in the oval opening of the stimulation head.

Step 3. If more intensity is needed, press the C button briefly; the intensity will increase by one level. After the third click, the highest intensity level has been reached.

Step 4. The fourth click returns the WOMANIZER STARLET to soft mode.

Step 5. To switch off the device, press the C button for approximately two seconds.

Note: The WOMANIZER STARLET automatically becomes quieter when the stimulation head is in perfect contact with your body.

It is recommended to charge the WOMANIZER STARLET for approximately 3 hours before the first use. During the charging process, the stimulation device will warm up. During the first charging process or after a long period of non-use, it may take up to 180 minutes to fully charge the rechargeable battery due to environmental influences.

Step 1. Ensure that the WOMANIZER STARLET is clean and dry.

Step 2. Open the cover of the charging jack A.

Step 3. Insert the small plug of the charging cable D into the socket A. Insert the larger plug of the charging cable D into a suitable USB port, such as a USB charging device or a computer USB port.

Step 4. During the charging process, the control light of the stimulation device flashes red. If the control light is constantly red, the WOMANIZER STARLET has been fully charged.

The WOMANIZER STARLET should be thoroughly cleaned before first-time use, after each usage, and when using in another body area in order to reduce the risk of infection.

Step 1. Remove the silicone stimulation head B and clean it with warm water and a suitable toy cleaner, then dry it.

Step 2. Thoroughly clean the surface of the WOMANIZER STARLET with a soft, damp cloth using warm water and toy cleaner or anti-bacterial soap. Dry the device thoroughly.

Step 3. Replace the silicone stimulation head B on the WOMANIZER STARLET. The device is now perfectly cleaned and ready for use.

Keep the product away from children, especially small children.

Do not expose the WOMANIZER STARLET or the charging device to direct sunlight or UV light for a longer period of time and avoid extreme heat.

Never immerse the charging cable in water or other fluids and never rinse it under flowing water.

Do not charge the product if one of the components is damaged.

Never use the product for longer than 15 minutes on any one area.

Do not use the WOMANIZER STARLET if you have a pacemaker.

Only use the product for its intended purpose, which is clitoral stimulation.

Stop use immediately if you experience pain or discomfort.

The integrated lithium-ion rechargeable battery is non-replaceable. It must not be burnt, dismantled, or exposed to temperatures above 60 degrees Celsius as it may explode if overheated. If you notice an unusual noise, switch off the stimulation device immediately and refrain from further use.

Please consult your doctor if you wish to use the product under any of the following circumstances:

During pregnancy or shortly after giving birth.

If you have skin irritations or skin diseases.

If you have any other health problems.

You can use the WOMANIZER STARLET together with water-based lube gel. Do not use perfumed or alcohol-based lube gels or massage oils to avoid damage to the device.

Store the device in a secure, dry place without exposure to direct sunlight. Charge and use the device at temperatures between 5 degrees Celsius and 35 degrees Celsius. Keep it in storage within this same temperature range.

The following table provides the technical data and features for the WOMANIZER STARLET: