VOX ELECTRONICS UHD 55DSW552V (01) PDF DOCUMENT

There are several important safety precautions for the VOX ELECTRONICS UHD 55DSW552V:

• Do not place any heat sources such as electric heaters, radiators, etc. near the VOX ELECTRONICS UHD 55DSW552V.
• Do not place the VOX ELECTRONICS UHD 55DSW552V on the floor and inclined surfaces.
• To avoid danger of suffocation, keep plastic bags out of the reach of babies, children and domestic animals.
• Carefully attach the stand to the VOX ELECTRONICS UHD 55DSW552V. If the stand is provided with screws, tighten the screws firmly to prevent the VOX ELECTRONICS UHD 55DSW552V from tilting. Do not over-tighten the screws and mount the stand rubbers properly.
• Do not dispose of the batteries in fire or with hazardous or flammable materials.

Batteries for the VOX ELECTRONICS UHD 55DSW552V must not be exposed to excessive heat such as sunshine, fire or the like. Additionally, do not ingest the battery, as it poses a chemical burn hazard. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Excessive sound pressure from earphones or headphones can cause hearing loss with the VOX ELECTRONICS UHD 55DSW552V.

Above all, never let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case of the VOX ELECTRONICS UHD 55DSW552V.

The “Class II Equipment” marking on the VOX ELECTRONICS UHD 55DSW552V indicates that this appliance is designed in such a way that it does not require a safety connection to electrical earth.

The “Hazardous Live Terminal” marking on the VOX ELECTRONICS UHD 55DSW552V means that the marked terminal(s) is/are hazardous live under normal operating conditions.

The “Caution, See Operating Instructions” marking on the VOX ELECTRONICS UHD 55DSW552V indicates that the marked area(s) contain(s) user replaceable coin or button cell batteries.

The “CLASS 1 LASER PRODUCT” marking on the VOX ELECTRONICS UHD 55DSW552V means that this product contains a Class 1 laser source that is safe under reasonably foreseeable conditions of operation.

Never place the VOX ELECTRONICS UHD 55DSW552V in unstable or inclined locations, as it may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions:

• Using cabinets or stands recommended by the manufacturer of the VOX ELECTRONICS UHD 55DSW552V.
• Only using furniture that can safely support the VOX ELECTRONICS UHD 55DSW552V.
• Ensuring the VOX ELECTRONICS UHD 55DSW552V is not overhanging the edge of the supporting furniture.
• Not placing the VOX ELECTRONICS UHD 55DSW552V on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the VOX ELECTRONICS UHD 55DSW552V to a suitable support.
• Not standing the VOX ELECTRONICS UHD 55DSW552V on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the VOX ELECTRONICS UHD 55DSW552V or its controls.
• If your existing VOX ELECTRONICS UHD 55DSW552V is being retained and relocated, the same considerations as above should be applied.

Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing – and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator) with the VOX ELECTRONICS UHD 55DSW552V.

When mounting your VOX ELECTRONICS UHD 55DSW552V on the wall:

• Read the instructions before mounting your VOX ELECTRONICS UHD 55DSW552V on the wall.
• The wall mount kit is optional. You can obtain it from your local dealer, if not supplied with your VOX ELECTRONICS UHD 55DSW552V.
• Do not install the VOX ELECTRONICS UHD 55DSW552V on a ceiling or on an inclined wall.
• Use the specified wall mounting screws and other accessories.
• Tighten the wall mounting screws firmly to prevent the VOX ELECTRONICS UHD 55DSW552V from falling. Do not over-tighten the screws.

To reduce energy consumption on your VOX ELECTRONICS UHD 55DSW552V, you can follow these steps:

• Set the Energy Saving to Minimum, Medium, Maximum or Auto. The VOX ELECTRONICS UHD 55DSW552V will reduce energy consumption accordingly. Set as Off to turn this setting off.
• If you like to set the Backlight to a fixed value, set as Custom and adjust the Backlight (located under the Energy Saving setting) manually using Left or Right buttons on the remote.
• You can also turn the screen off using the Screen Off option if you want to hear the sound only. If pressed Right or Left button consecutively, the Screen Off option will be selected and “Screen will be off in 15 seconds” message will be displayed. Select Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be off in 15 seconds. Press any button on the remote or on the VOX ELECTRONICS UHD 55DSW552V to turn the screen on again.
• When the VOX ELECTRONICS UHD 55DSW552V is not in use, please switch off or disconnect it from the mains plug. This will also reduce or stop energy consumption.

The VOX ELECTRONICS UHD 55DSW552V includes the following features:

• Remote controlled colour TV
• Fully integrated digital terrestrial/cable/satellite TV (DVB-T-T2/C/S2)
• HDMI inputs to connect other devices with HDMI sockets
• USB input
• OSD menu system
• Stereo sound system
• Teletext
• Headphone connection
• Automatic programming system
• Manual tuning
• Automatic power down after up to eight hours.
• Sleep timer
• Child lock
• Automatic sound mute when no transmission.
• NTSC playback
• AVL (Automatic Volume Limiting)
• PLL (Frequency Search)
• PC input
• Game Mode (Optional)
• Picture off function
• Programme recording
• Programme timeshifting
• Ethernet (LAN) for Internet connectivity and service
• 802.11 a/b/g/n built in WLAN Support
• Audio Video Sharing
• HbbTV

The VOX ELECTRONICS UHD 55DSW552V supports Ultra HD (Ultra High Definition – also known as 4K) which provides a resolution of 3840 x 2160 (4K:2K). This resolution is 4 times that of a Full HD TV by doubling the pixel count both horizontally and vertically. Ultra HD content is supported from HDMI, USB inputs and over DVB-T2 and DVB-S2 broadcasts.

Using this feature, the VOX ELECTRONICS UHD 55DSW552V can reproduce a greater dynamic range of luminosity by capturing and then combining several different exposures. HDR/HLG promises better picture quality thanks to brighter, more realistic highlights, more realistic colour and other improvements. It delivers the look that filmmakers intended to achieve, showing hidden areas of dark shadows and sunlight with full clarity, colour and detail. HDR/HLG contents are supported via native and market applications, HDMI, USB inputs and over DVB-S broadcasts.

To watch HDR/HLG content received through an HDMI input, set the related HDMI source input as Enhanced from the Sources option in the Settings>System menu. The source device should also be at least HDMI 2.0a compatible in this case.

The VOX ELECTRONICS UHD 55DSW552V includes the following accessories:

• Remote Control
• Batteries: 2 x AAA
• Instruction Book

If the VOX ELECTRONICS UHD 55DSW552V does not receive any input signal (e.g., from an aerial or HDMI source) for 3 minutes, it will go into standby. When you next switch-on, the following message will be displayed: “TV switched to stand-by mode automatically because there was no signal for a long time.”

The Auto Power Down option (in the Settings>System>More menu) could have been set to a value between 1 and 8 hours by default. If this setting is not set as Off and the VOX ELECTRONICS UHD 55DSW552V has been left on and not been operated during the set time, it will switch into standby mode after the set time has expired. When you next switch-on, the following message will be displayed: “TV switched to stand-by mode automatically because no operation was made for a long time.” Before the VOX ELECTRONICS UHD 55DSW552V switches into standby mode, a dialogue window will be displayed. If you do not press any button, the VOX ELECTRONICS UHD 55DSW552V will switch into standby mode after a waiting period of about 5 minutes. You can highlight Yes and press OK to switch the VOX ELECTRONICS UHD 55DSW552V into standby mode immediately. If you highlight No and press OK, the VOX ELECTRONICS UHD 55DSW552V will remain on. You can also choose to cancel the Auto Power Down function from this dialogue. Highlight Disable and press OK, the VOX ELECTRONICS UHD 55DSW552V will remain on and the function will be cancelled. You can enable this function again by changing the setting of the Auto Power Down option from the Settings>System>More menu.

The VOX ELECTRONICS UHD 55DSW552V has a single control button that allows you to control the Standby-On / Source / Programme and Volume functions. Press the control button to display the function options menu.

• To move the focus to the desired option: Press the button consecutively.
• To activate the selected option: Press and hold the button for about 2 seconds. The icon colour of the option changes when activated.
• To use the function or enter the sub menu: Press the button once again.
• To select another function option: Deactivate the last activated option first by pressing and holding the button. The icon colour changes when deactivated.
• To close the function options menu: Do not press the button for about 5 seconds. The function options menu will disappear.

To turn the VOX ELECTRONICS UHD 55DSW552V off:

Press the control button to display the function options menu, the focus will be on the Standby option. Press and hold the button for about 2 seconds to activate this option. The icon colour of the option changes when activated. Then press the button once again to turn the VOX ELECTRONICS UHD 55DSW552V off.

To turn on the VOX ELECTRONICS UHD 55DSW552V, simply press the control button.

To change volume on the VOX ELECTRONICS UHD 55DSW552V:

Press the control button to display the function options menu and then press the button consecutively to move the focus to Volume + or Volume – option. Press and hold the button for about 2 seconds to activate the selected option. The icon colour of the option changes when activated. Then press the button to increase or decrease the volume.

To change channels on the VOX ELECTRONICS UHD 55DSW552V:

Press the control button to display the function options menu and then press the button consecutively to move the focus to Programme + or Programme – option. Press and hold the button for about 2 seconds to activate the selected option. The icon colour of the option changes when activated. Then press the button to switch to the next or previous channel in the channel list.

To change the source on the VOX ELECTRONICS UHD 55DSW552V:

Press the control button to display the function options menu and then press the button consecutively to move the focus to Source option. Press and hold the button for about 2 seconds to activate this option. The icon colour of the option changes when activated. Then press the button once again to display the sources list. Scroll through the available sources by pressing the button. The VOX ELECTRONICS UHD 55DSW552V will automatically switch to the highlighted source.

Press the Menu button on your remote control to display the main menu. Use the directional buttons and OK button to navigate and set. Press Return/Back or Menu button to quit a menu screen.

Once you have connected external systems to your VOX ELECTRONICS UHD 55DSW552V, you can switch to different input sources. Press the Source button on your remote control consecutively to select the different sources.

You can change the channel and adjust the volume on the VOX ELECTRONICS UHD 55DSW552V by using the Programme +/- and Volume +/- buttons on the remote.

When the Menu button is pressed, the main TV menu will appear on the screen. You can navigate through the menu items using the directional buttons on the remote. To select an item or see the sub-menu options of the highlighted menu, press OK button. When you highlight a menu option, some of the sub-menu items of this menu may appear on the upper side of the menu bar for quick access. To use a quick access item, highlight it, press OK and set as desired using the Left/Right directional buttons. When finished, press OK or Back/Return button to exit. Press Exit button to close the main menu.

When the main menu is opened, the Home menu bar will be highlighted. The content of the Home menu can be customised by adding options from other menus. Just highlight an option and press the Down direction button on the remote. If you see Add to Home option, you can add it to the Home menu. Similarly, you can delete or change the position of any item in the Home menu. Press the Down direction button and select Delete or Move option and press OK. To move a menu item, use the Right and Left direction buttons to select the position that you want the item to move to and press OK.

You can search for channels, programmes, services or settings on the VOX ELECTRONICS UHD 55DSW552V by using the Search option in the TV menu. Press OK and enter a key word using the virtual keyboard. Then highlight OK and press OK to start the search. Results will be displayed on the screen. Highlight the desired result using the directional buttons and press OK to open.

You can access the electronic programme guide menu on the VOX ELECTRONICS UHD 55DSW552V using the Guide option in the TV menu. Refer to the Electronic Programme Guide section for more information.

You can set timers for future events using the options of the Timers menu on the VOX ELECTRONICS UHD 55DSW552V. You can also review previously created timers under this menu.

• To add a new timer: Select the Add Timer tab using the Left/Right buttons and press OK. Set the sub-menu options as desired and when finished, press OK.
• To edit a previously created timer: Highlight that timer, select the Edit Selected Timer tab and press OK. Change the sub-menu options as desired and press OK to save your settings.
• To cancel an already set timer: Highlight that timer, select Delete Selected Timer tab and press OK. A confirmation message will be displayed. Highlight Yes and press OK to proceed.

It is not possible to set timers for two or more events that will be broadcasted in different channels at the same time interval. In this case, you will be asked to choose one of these timers and cancel others. Highlight the timer you want to cancel and press OK, Options menu will be displayed. Then highlight Set/Cancel and press OK to cancel that timer. You will have to save changes after that. In order to do that press OK, highlight Save Changes and press OK again.

You can manage your recordings on the VOX ELECTRONICS UHD 55DSW552V using the options of the Recordings menu. You can playback, edit, delete or sort previously recorded events. Highlight a tab by using the Left or Right direction button and press OK to see available options. Refer to the USB Recording section for more information.

You can manage the settings of your VOX ELECTRONICS UHD 55DSW552V using the options of the Settings menu. Refer to the Settings Menu Content section for more information.

When your VOX ELECTRONICS UHD 55DSW552V is connected to the Internet, Apps related contents will also be available. Using the Apps menu, you can access and manage your applications. You can add new apps from the market or delete existing ones. Refer to the Apps section for more information.

You can manage your input source references on the VOX ELECTRONICS UHD 55DSW552V using the options of the Sources menu. To change the current source, highlight one of the options and press OK.

You can edit the names, enable or disable selected source options on your VOX ELECTRONICS UHD 55DSW552V. There are also Regular and Enhanced options available for HDMI sources, which affect the colour settings of the selected HDMI source.

You can reset your customisations on the Home and Apps menus to defaults using the Reset Menu option in the Settings menu (availability depends on the VOX ELECTRONICS UHD 55DSW552V model and its features). Highlight this option and press OK. A confirmation message will be displayed. Highlight Yes and press OK to proceed. Note that you will not be able to perform this operation again within the next 2 minutes.

To insert batteries into the remote control for your VOX ELECTRONICS UHD 55DSW552V:

• Remove the back cover by placing the tip of a pen or some other pointed object in the hole above the cover and pressing it down, then pressing firmly on the cover and sliding it in the direction of the arrow.
• Insert two size AAA batteries. Make sure the (+) and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with the same or equivalent type. Place the cover back on.

A message will be displayed on the screen when the batteries are low and must be replaced. Note that when the batteries are low, the performance of the remote control may be impaired.

The VOX ELECTRONICS UHD 55DSW552V is designed to operate on a 220-240V AC, 50 Hz supply. After unpacking, allow the VOX ELECTRONICS UHD 55DSW552V to reach the ambient room temperature before you connect it to the mains. Plug the power cable to the mains socket outlet.

Connect the aerial or cable TV plug to the AERIAL INPUT (ANT-TV) socket or satellite plug to the SATELLITE INPUT (ANT SAT) socket located on the rear side of the VOX ELECTRONICS UHD 55DSW552V.

The remote control for the VOX ELECTRONICS UHD 55DSW552V has the following functions:

• **Standby:** Switches On / Off the VOX ELECTRONICS UHD 55DSW552V.
• **Numeric buttons:** Switches the channel, enters a number or a letter in the text box on the screen.
• **Language:** Switches among sound modes (analogue TV), displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available).
• **Mute:** Completely turns off the volume of the VOX ELECTRONICS UHD 55DSW552V.
• **Volume +/-:** Controls the volume.
• **Guide:** Displays the electronic programme guide.
• **Directional buttons:** Helps navigate menus, content etc. and displays the subpages in TXT mode when pressed Right or Left.
• **OK:** Confirms user selections, holds the page (in TXT mode), views Channels menu (DTV mode).
• **Back/Return:** Returns to previous screen, previous menu, opens index page (in TXT mode). Quickly cycles between previous and current channels or sources.
• **Netflix:** Launches the Netflix application.
• **My Button 1 (*):** This button may have a default function, but you can set a special function by pressing on it for five seconds when on a desired source or channel. After confirmation, My Button 1 is associated with the selected function. If you perform First Time Installation, My Button 1 will return to its default function.
• **Coloured Buttons:** Follow the on-screen instructions for coloured button functions.
• **Rewind:** Moves frames backwards in media such as movies.
• **Record:** Records programmes.
• **Play:** Starts to play selected media.
• **Pause:** Pauses the media being played, starts timeshift recording.
• **Stop:** Stops the media being played.
• **Fast Forward:** Moves frames forward in media such as movies.
• **Prime Video:** Launches the Amazon Prime Video application.
• **YouTube:** Launches the YouTube application.
• **Exit:** Closes and exits from displayed menus or returns to previous screen.
• **Info:** Displays information about on-screen content, shows hidden information (reveal – in TXT mode).
• **Menu:** Displays TV menu.
• **Programme +/-:** Changes the channel.
• **Text:** Displays teletext (where available), press again to superimpose the teletext over a normal broadcast picture (mix).
• **Source:** Shows available broadcast and content sources.

To switch the VOX ELECTRONICS UHD 55DSW552V on from standby mode, you can either:

• Press the Standby button, Programme +/- or a numeric button on the remote control.
• Press the control button on the VOX ELECTRONICS UHD 55DSW552V.

To switch the VOX ELECTRONICS UHD 55DSW552V off, you can either:

• Press the Standby button on the remote control.
• Press the control button on the VOX ELECTRONICS UHD 55DSW552V, the function options menu will be displayed. The focus will be on the Standby option. Press and hold the button for about 2 seconds to activate this option. The icon colour of the option will change. Then press the button once again, the VOX ELECTRONICS UHD 55DSW552V will switch into standby mode.

To power down the VOX ELECTRONICS UHD 55DSW552V completely, unplug the power cord from the mains socket.

When the VOX ELECTRONICS UHD 55DSW552V is turned on for the first time, the language selection screen is displayed. Select the desired language and press OK. In the following steps of the installation guide, set your preferences using the directional buttons and OK button.

• On the second screen, set your country preference. Depending on the Country selection, you may be asked to set and confirm a PIN at this point. The selected PIN cannot be 0000.
• You can activate the Store Mode option in the next step. This option configures the VOX ELECTRONICS UHD 55DSW552V’s settings for a store environment. It is recommended to select Home Mode for home use. Make your selection and press OK to continue.
• Depending on the model of your VOX ELECTRONICS UHD 55DSW552V and the country selection, the Privacy Settings menu may appear. Using this menu, you can set your privacy privileges. Highlight a feature and use Left and Right directional buttons to enable or disable.
• Highlight Next and press OK on the remote control to continue and the Network/Internet Settings menu will be displayed. Please refer to the Connectivity section to configure a wired or wireless connection.
• If you want the VOX ELECTRONICS UHD 55DSW552V to consume less power in standby mode, you can disable the Wake On option by setting it as Off.
• On the next screen, you can set broadcast types to be searched, set encrypted channel searching and time zone preferences. Additionally, you can set a broadcast type as your favourite one. When finished, highlight Next and press OK to continue.

To turn a search option for a broadcast type, highlight it and press OK. The checkbox next to the selected option will be checked. To turn the search option off, clear the checkbox by pressing OK after moving the focus on the desired broadcast type option.

• **Digital Aerial:** If the D. Aerial broadcast search option is turned on, the VOX ELECTRONICS UHD 55DSW552V will search for digital terrestrial broadcasts after other initial settings are completed.
• **Digital Cable:** If the D. Cable broadcast search option is turned on, the VOX ELECTRONICS UHD 55DSW552V will search for digital cable broadcasts after other initial settings are completed. You can select Network or set values such as Frequency, Network ID and Search Step.
• **Satellite:** If the Satellite broadcast search option is turned on, the VOX ELECTRONICS UHD 55DSW552V will search for digital satellite broadcasts. Before search, you can select Antenna Type as Direct, Single Satellite Cable or DiSEqC switch.
• **Analogue:** If the Analogue broadcast search option is turned on, the VOX ELECTRONICS UHD 55DSW552V will search for analogue broadcasts after other initial settings are completed.

You can connect 2.5″ and 3.5″ inch (HDD with external power supply) external hard disk drives or USB memory stick to your VOX ELECTRONICS UHD 55DSW552V by using the USB inputs.

It is important to back up the files on your storage devices before connecting them to the VOX ELECTRONICS UHD 55DSW552V. The manufacturer will not be responsible for any file damage or data loss. Certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this VOX ELECTRONICS UHD 55DSW552V. The VOX ELECTRONICS UHD 55DSW552V supports FAT32 and NTFS disk formatting but recording will not be available with NTFS formatted disks.

When formatting USB hard drives which have more than 1TB (Tera Byte) storage space, you may experience some problems in the formatting process.

Wait a little while before each plugging and unplugging as the player may still be reading files. Failure to do so may cause physical damage to the USB player and the USB device itself. Do not pull out your drive while playing a file.

You can use USB hubs with your VOX ELECTRONICS UHD 55DSW552V’s USB inputs. External power supplied USB hubs are recommended in such a case. It is recommended to use the VOX ELECTRONICS UHD 55DSW552V’s USB input(s) directly if you are going to connect a USB hard disk.

When using a new USB hard disk drive with the VOX ELECTRONICS UHD 55DSW552V, it is recommended that you first format the disk using your VOX ELECTRONICS UHD 55DSW552V’s Format Disk option in the TV>Recordings>Settings menu.

To record a programme, you should first connect a USB disk to your VOX ELECTRONICS UHD 55DSW552V while the VOX ELECTRONICS UHD 55DSW552V is switched off. You should then switch on the VOX ELECTRONICS UHD 55DSW552V to enable the recording feature. Your USB drive should have 2 GB free space and be USB 2.0 compatible. If the USB drive is not compatible, an error message will be displayed. To record long duration programmes such as movies, it is recommended to use USB Hard disk drives (HDD’s).

Recorded programmes are saved into the connected USB disk. These files will not be available to be played on a computer, but you can play the recordings only via your VOX ELECTRONICS UHD 55DSW552V.

Lip Sync delay may occur during timeshifting. Radio record is supported. The VOX ELECTRONICS UHD 55DSW552V can record programmes up to ten hours. Recorded programmes are split into 4GB partitions. If the writing speed of the connected USB disk is not sufficient, the recording may fail and the timeshifting feature may not be available.

It is recommended to use USB hard disk drives for recording HD programmes. Do not pull out the USB/HDD during a recording, as this may harm the connected USB/HDD. If the AC cord is unplugged while there is an active USB-recording timer setting, it will be cancelled. Multipartition support is available. A maximum of two different partitions are supported. The first partition of the USB disk is used for USB Recording ready features, and must be formatted as the primary partition.

The Max Timeshift setting on the VOX ELECTRONICS UHD 55DSW552V allows you to set the maximum duration for the timeshift recording. Available options are approximate, and the actual recording time may change depending on the broadcast. The reserved and free storage space values will change according to this setting. Make sure that you have enough free space; otherwise, instant recording may not be possible.

You can set the Discard type as None, Oldest, Longest or Shortest on the VOX ELECTRONICS UHD 55DSW552V. If it is not set to None, you can set the Unplayed option as Included or Excluded. These options determine the preferences for deleting recordings to obtain more storage space for ongoing records.

You can view detailed information about the USB storage device connected to your VOX ELECTRONICS UHD 55DSW552V. Highlight and press OK to see and press Back/Return to close.

If you want to delete all files on the connected USB storage device and convert the disk format to FAT32, you can use the Format Disk option on the VOX ELECTRONICS UHD 55DSW552V. Press OK button while the Format Disk option is highlighted. A menu will appear on the screen, requiring you to enter the PIN(*). After you enter the PIN, a confirmation message will be displayed. Select Yes and press OK to start formatting the USB storage device. Select No and press OK to cancel.

It is important to note that formatting your USB drive will erase ALL the data on it and its file system will be converted to FAT32. In most cases, operation errors will be fixed after a format, but you will lose ALL your data.

If a “USB disk writing speed too slow to record” message is displayed on the screen while starting a recording on the VOX ELECTRONICS UHD 55DSW552V, try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. Try connecting another USB disk.

Press the Pause button while watching a broadcast on the VOX ELECTRONICS UHD 55DSW552V to activate timeshifting mode. In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB disk.

Press the Play button again to resume the paused programme from where you stopped. Press the Stop button to stop timeshift recording and return to the live broadcast.

Timeshift cannot be used while in radio mode. You can use the timeshift rewind feature after resuming normal playback or the fast forward option.

To start recording an event instantly while watching a programme on the VOX ELECTRONICS UHD 55DSW552V, press the Record button. To cancel instant recording, press the Stop button.

You cannot switch broadcasts during the recording mode. While recording a programme or during timeshifting, a warning message appears on the screen if your USB device speed is not sufficient.

To watch recorded programmes on the VOX ELECTRONICS UHD 55DSW552V, select Recordings from the TV menu. Select a recorded item from the list (if previously recorded). Press the OK button to view the Options menu. Select an option, then press OK button.

To stop a playback and return to the Recordings, press the Stop button.

If you press the Pause button while watching recorded programmes on the VOX ELECTRONICS UHD 55DSW552V, the slow forward feature will be available. You can use the Fast Forward button to slow forward. Pressing the Fast Forward button consecutively will change slow forwarding speed.

You can configure your recording preferences using the Settings tab in the TV>Recordings menu on the VOX ELECTRONICS UHD 55DSW552V. Highlight the Settings tab by using Left or Right button and press OK. Then select the desired item in the sub-menu and set by using Left or Right button.

• **Start early:** You can set the recording timer’s starting time to start earlier by using this setting.
• **End late:** You can set the recording timer’s end time to end later by using this setting.

You can play back music and movie files and display photo files stored on a USB storage device by connecting it to your VOX ELECTRONICS UHD 55DSW552V. Connect a USB storage device to one of the USB inputs located on the side of the VOX ELECTRONICS UHD 55DSW552V.

After connecting a USB storage device to your VOX ELECTRONICS UHD 55DSW552V, the Media Browser menu will be displayed on the screen. You can access the content of the connected USB device any time later from the Sources menu. Select the related USB input option from this menu and press OK. You can also press the Source button on the remote and then select your USB storage device from the list of sources. Then select the file of your choice and press OK to display or play it back.

You can set your Media Browser preferences by using the Settings menu on the VOX ELECTRONICS UHD 55DSW552V. The Settings menu can be accessed via the information bar which is displayed on the bottom of the screen while playing back a video or an audio file or displaying a picture file. Press the Info button if the information bar has disappeared, highlight the gear wheel symbol positioned on the right side of the information bar and press OK. Picture Settings, Sound Settings, Media Browser Settings and Options menus will be available. The contents of these menus may change according to the type of the currently open media file. Only the Sound Settings menu will be available while playing back audio files.

To use the functions on the information bar for Loop/Shuffle Mode on the VOX ELECTRONICS UHD 55DSW552V, highlight the symbol of the function and press OK. To change the status of a function, highlight the symbol of the function and press OK as much as needed. If the symbol is marked with a red cross, that means it is deactivated.

With your mobile device, you can stream the current broadcast from your VOX ELECTRONICS UHD 55DSW552V using the FollowMe TV feature. Install the appropriate Smart Center application to your mobile device. Start the application.

Tap on the FOLLOW ME TV widget located at the bottom left of the screen of your mobile device to change the layout for the FollowMe TV feature.

Tap the play icon to start streaming of the content from the VOX ELECTRONICS UHD 55DSW552V to your mobile device. This is available if your device is in your router’s operation range.

Mirror Mode is enabled by default and allows streaming the content from any other selected VOX ELECTRONICS UHD 55DSW552V sources and Media Browser.

The CEC option in the Settings>System>Device Settings menu on the VOX ELECTRONICS UHD 55DSW552V should be set as Enabled at first. Press the Source button and select the HDMI input of the connected CEC device from the Sources List menu. When a new CEC source device is connected, it will be listed in the source menu with its own name instead of the connected HDMI ports name (such as DVD Player, Recorder 1 etc.).

The VOX ELECTRONICS UHD 55DSW552V remote is automatically able to perform the main functions after the connected HDMI source has been selected. To terminate this operation and control the VOX ELECTRONICS UHD 55DSW552V via the remote again, press and hold the “0-Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the related option under the Settings>System>Device Settings menu accordingly.

The VOX ELECTRONICS UHD 55DSW552V supports ARC (Audio Return Channel). This feature is an audio link meant to replace other cables between the VOX ELECTRONICS UHD 55DSW552V and an audio system (A/V receiver or speaker system).

When ARC is active, the VOX ELECTRONICS UHD 55DSW552V does not mute its other audio outputs automatically. You will need to decrease VOX ELECTRONICS UHD 55DSW552V volume to zero manually if you wish to hear the ARC audio only (as with optical or co-axial digital audio outputs). If you want to change the connected device’s volume level, you should select that device from the source list. In that case, volume control keys are directed to the connected audio device. ARC is supported only via the HDMI2 input.

System Audio Control on the VOX ELECTRONICS UHD 55DSW552V allows an Audio Amplifier/Receiver to be used with the VOX ELECTRONICS UHD 55DSW552V. The volume can be controlled using the remote control of the VOX ELECTRONICS UHD 55DSW552V. To activate this feature, set the Sound Output option in the Settings>Sound menu as HDMI ARC. When the HDMI ARC option is selected, the CEC option will be set as Enabled automatically, if it is not already set. The VOX ELECTRONICS UHD 55DSW552V speakers will be muted, and the sound of the watched source will be provided from the connected sound system. The audio device should support the System Audio Control feature.

You can find instructions for your VOX ELECTRONICS UHD 55DSW552V’s features in the E-Manual.

To access the E-Manual, enter Settings menu, select Manuals and press OK. For quick access, press the Menu button and then the Info button.

By using the directional buttons, select a desired category. Every category includes different topics. Select a topic and press OK to read instructions.

To close the E-Manual screen, press the Exit or Menu button.

The Application Version option on the VOX ELECTRONICS UHD 55DSW552V displays the current software version.

The Subtitle Mode option on the VOX ELECTRONICS UHD 55DSW552V is used to select which subtitle mode will be on the screen (DVB subtitle / Teletext subtitle) if both are available. The default value is DVB subtitle. This feature is available only for the country option of Norway.

The Auto Power Down option on the VOX ELECTRONICS UHD 55DSW552V sets the desired time for the VOX ELECTRONICS UHD 55DSW552V to automatically go into standby mode when not being operated. This option can be set from 1 to 8 hours in steps of 1 hour. You can also disable this option by setting as Off.

Biss is a satellite signal scrambling system that is used for some broadcasts. If you need to enter a Biss key on a broadcast on the VOX ELECTRONICS UHD 55DSW552V, you can use the Biss Key setting. Highlight Biss Key and press OK to enter keys on the desired broadcast.

The Store Mode option on the VOX ELECTRONICS UHD 55DSW552V selects this mode for store display purposes. Whilst Store Mode is enabled, some items in the VOX ELECTRONICS UHD 55DSW552V menu may not be available.

The AVS feature on the VOX ELECTRONICS UHD 55DSW552V allows you to share files stored on your smartphone or tablet PC. If you have a compatible smartphone or tablet PC and the appropriate software is installed, you can share/play photos on your VOX ELECTRONICS UHD 55DSW552V. Refer to the instructions of your sharing software for more information.

The Power Up Mode setting on the VOX ELECTRONICS UHD 55DSW552V configures the power up mode preference. Last State and Standby options are available.

The Virtual Remote setting on the VOX ELECTRONICS UHD 55DSW552V allows you to enable or disable the virtual remote feature.

The Show All Cookies option on the VOX ELECTRONICS UHD 55DSW552V displays all saved cookies. The Delete All Cookies option deletes all saved cookies.

The OSS option on the VOX ELECTRONICS UHD 55DSW552V displays Open Source Software license information.

The Do Not Track option on the VOX ELECTRONICS UHD 55DSW552V allows you to set your preference regarding the tracking behaviour for HbbTV services.

The Application Priority option on the VOX ELECTRONICS UHD 55DSW552V allows you to set your preference regarding the priority between the broadcast applications and CICAM AppMMI applications. In case a CICAM is inserted into the VOX ELECTRONICS UHD 55DSW552V and a contention occurs between the applications, the priority will be given to the selected type of application.

The VOX ELECTRONICS UHD 55DSW552V sorts all stored stations in the channel list. You can edit this channel list, set favourites or set active stations to be listed by using the Channels menu options. Press the OK button to open the channel list. You can filter the listed channels or make advanced changes in the current list using the Filter and Edit tab options. Highlight the tab you want and press OK to see available options.

To add the channel you are currently watching to the Home menu, highlight the Add to Home option in the Edit tab in the Channels menu and press OK.

You can create four different lists of your favourite channels on the VOX ELECTRONICS UHD 55DSW552V. Enter the TV>Channels menu or press the OK button to open the Channels menu. Highlight the Edit tab and press OK to see the editing options and select the Tag/Untag channel option. Select the desired channel on the list by pressing the OK button while the channel is highlighted. You can make multiple choices. You can also use the Tag/Untag all option to select all channels in the list. Then press Back/Return button to return to the Edit menu options. Select the Add/Remove Favourites option and press the OK again. Favourite channel list options will be displayed. Set the desired list option to On. The selected channel(s) will be added to the list. To remove a channel or channels from a favourite list, follow the same steps and set the desired list option to Off.

You can use the filtering function in the Channels menu to filter the channels in the channel list permanently according to your preferences. For instance, using the options of the Filter tab, you can set one of your four favourite lists to be displayed every time the channel list is opened.

The Parental menu options on the VOX ELECTRONICS UHD 55DSW552V can be used to prohibit users from viewing certain programmes, channels and using of menus. These settings are located in the Settings>System>Parental menu.

To display parental lock menu options, a PIN should be entered. After coding the correct PIN, the Parental menu will be displayed.

• **Menu Lock:** This setting enables or disables access to all menus or installation menus of the VOX ELECTRONICS UHD 55DSW552V.
• **Maturity Lock:** If this option is set, the VOX ELECTRONICS UHD 55DSW552V gets the maturity information from the broadcast, and if this maturity level is disabled, prohibits access to the broadcast.
• **Child Lock:** If this option is set to On, the VOX ELECTRONICS UHD 55DSW552V can only be controlled by the remote control. In this case, the control buttons on the VOX ELECTRONICS UHD 55DSW552V will not work.
• **Internet Lock:** If this option is set to ON, the internet using applications will be disabled. Set to OFF to release these applications again.
• **Set PIN:** Defines a new PIN number.
• **Default CICAM PIN:** This option will appear as greyed out if no CI module is inserted into the CI slot of the VOX ELECTRONICS UHD 55DSW552V. You can change the default PIN of the CI CAM using this option.

By means of the electronic programme guide function of your VOX ELECTRONICS UHD 55DSW552V, you can browse the event schedule of the currently installed channels on your channel list. It depends on the related broadcast whether this feature is supported or not.

To access the programme guide, press the Guide button on your remote. You can also use the Guide option under the TV menu.

There are 2 different types of schedule layouts available: Timeline Schedule and Now/Next. To switch between these layouts, highlight the tab with the name of the alternative layout on the upper side of the screen and press OK. Use the directional buttons to navigate through the programme guide. Use the Back/Return button to use the tab options on the upper side of the screen.

• **Timeline Schedule:** In this layout option, all events of the listed channels will be displayed by timeline. You can use the directional buttons to scroll through the list of the events. Highlight an event and press OK to display the event options menu. Press Back/Return button to use available tab options. Highlight the Filter tab and press OK to see the filtering options. To change the layout, highlight Now/Next and press OK. You can use the Previous Day and Next Day options to display the events of the previous and next day.
• **Now/Next Schedule:** In this layout option, only the current and next events of the listed channels will be displayed. You can use the directional buttons to scroll through the list of the events.

Use the directional buttons to highlight an event and press the OK button to display the Options menu. The following options are available on the VOX ELECTRONICS UHD 55DSW552V:

• **Select Channel:** Using this option, you can switch to the selected channel to watch it. The programme guide will be closed.
• **More Info:** Display detailed information on the selected event. Use up and down directional buttons to scroll through the text.
• **Set Timer on Event / Delete Timer on Event:** Select Set Timer on Event option and press OK. You can set timers for future events. To cancel an already set timer, highlight that event and press the OK button. Then select Delete Timer on Event option. The timer will be cancelled.
• **Record / Delete Rec. Timer:** Select the Record option and press the OK button. If the event is going to be broadcasted at a future time, it will be added to the Timers list to be recorded. If the selected event is being broadcasted at the moment, recording will start immediately. To cancel an already set record timer, highlight that event and press the OK button and select the option Delete Rec. Timer. The record timer will be cancelled.
• **Now:** Displays the current event of the highlighted channel.
• **Zoom:** Highlight and press OK to see events in a wider time interval.

Press the Text button on the VOX ELECTRONICS UHD 55DSW552V to enter. Press again to activate mix mode, which allows you to see the teletext page and the VOX ELECTRONICS UHD 55DSW552V broadcast at the same time. Press once more to exit. If available, sections in the teletext pages will become colour-coded and can be selected by pressing the coloured buttons. Follow the instructions displayed on the screen.

Press the Text button on the VOX ELECTRONICS UHD 55DSW552V to view digital teletext information. Operate it with the coloured buttons, cursor buttons and the OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on the digital teletext screen. When the Text button is pressed again, the VOX ELECTRONICS UHD 55DSW552V returns to television broadcast.

Your VOX ELECTRONICS UHD 55DSW552V is capable of finding and updating the firmware automatically via the broadcast signal or via the Internet.

To search for a software upgrade via the user interface:

• On the main menu, select Settings>System and then More.
• Navigate to Software upgrade and press the OK button.
• Then select Scan for upgrade and press OK button to check for a new software upgrade.

If a new upgrade is found, it starts to download the upgrade. After the download is completed, a warning will be displayed, press OK button to complete the software upgrade process and restart the VOX ELECTRONICS UHD 55DSW552V.

Your VOX ELECTRONICS UHD 55DSW552V will search for new upgrades at 3:00 o’clock if the Automatic scanning option is set to Enabled and if the VOX ELECTRONICS UHD 55DSW552V is connected to an aerial signal or to the Internet. If a new software is found and downloaded successfully, it will be installed at the next power on.

If your VOX ELECTRONICS UHD 55DSW552V will not turn on:

• Make sure the power cord is plugged in securely to a wall outlet.
• Press the Power button on the VOX ELECTRONICS UHD 55DSW552V.

If the picture quality is poor on your VOX ELECTRONICS UHD 55DSW552V:

• Check if you have correctly tuned the VOX ELECTRONICS UHD 55DSW552V.
• Low signal level can cause picture distortion. Please check antenna connections.
• Check if you have entered the correct channel frequency if you have performed manual tuning.

If there is no picture on your VOX ELECTRONICS UHD 55DSW552V:

• Check if the VOX ELECTRONICS UHD 55DSW552V is not receiving any signal. Make sure the correct source has been selected.
• Check if the antenna is connected properly.
• Check if the antenna cable is damaged.
• Check if suitable plugs are used to connect the antenna.
• If you are in doubt, consult your dealer.

If there is no sound on your VOX ELECTRONICS UHD 55DSW552V:

• Check if the VOX ELECTRONICS UHD 55DSW552V sound is muted. Press the Mute button or increase the volume to check.
• Sound may be coming from only one speaker. Check the balance settings from the Sound menu.

If the remote control for your VOX ELECTRONICS UHD 55DSW552V is not operating:

• The batteries may be exhausted. Replace the batteries.
• The batteries may be inserted incorrectly. Refer to the section “Inserting the Batteries into the Remote”.

If there is no signal on an input source on your VOX ELECTRONICS UHD 55DSW552V:

• It is possible that no device is connected.
• Check the AV cables and connections from your device.
• Check if the device is switched on.

To have your VOX ELECTRONICS UHD 55DSW552V automatically center the image, enter the PC Position menu in the Picture menu, highlight Autoposition and press OK. Wait for it to finish. In order to set the position of the image manually, you can use H Position and V Position options. Select the desired option and use Left and Right directional buttons on the remote to set.

If recording is unavailable on your VOX ELECTRONICS UHD 55DSW552V, to record a programme, you should first correctly connect a USB storage device to your VOX ELECTRONICS UHD 55DSW552V while the VOX ELECTRONICS UHD 55DSW552V is switched off. You should then switch on the VOX ELECTRONICS UHD 55DSW552V to enable the recording feature. If you cannot record, check if the storage device is correctly formatted and there is sufficient space.

If a “USB disk writing speed too slow to record” message is displayed on the screen while starting a recording on your VOX ELECTRONICS UHD 55DSW552V, try restarting the recording. If you still get the same error, it is possible that your USB storage device does not meet the speed requirements. Try using a different USB storage device.

The following table illustrates some of the typical video display modes supported by the VOX ELECTRONICS UHD 55DSW552V. Your VOX ELECTRONICS UHD 55DSW552V may not support all resolutions.

The VOX ELECTRONICS UHD 55DSW552V supports the following AV and HDMI signals:

The VOX ELECTRONICS UHD 55DSW552V supports the following video file formats in USB Mode:

The VOX ELECTRONICS UHD 55DSW552V supports the following picture file formats in USB Mode:

The VOX ELECTRONICS UHD 55DSW552V supports the following audio file formats in USB Mode:

The VOX ELECTRONICS UHD 55DSW552V supports the following external and internal subtitle file formats:

External Subtitles:

Internal Subtitles:

When connecting devices to your VOX ELECTRONICS UHD 55DSW552V’s connectors by using a DVI converter cable (DVI to HDMI cable – not supplied), you can refer to the following resolution information:

To connect your VOX ELECTRONICS UHD 55DSW552V to a wired network, you must have a modem/router connected to an active broadband connection.

Connect your VOX ELECTRONICS UHD 55DSW552V to your modem/router via an Ethernet cable. There is a LAN port at the rear (back) of your VOX ELECTRONICS UHD 55DSW552V.

You might be able to connect your VOX ELECTRONICS UHD 55DSW552V to your LAN depending on your network’s configuration. In such a case, use an Ethernet cable to connect your VOX ELECTRONICS UHD 55DSW552V directly to the network wall outlet.

The Network Type can be selected as Wired Device, Wireless Device or Disabled, in accordance with the active connection to the VOX ELECTRONICS UHD 55DSW552V. Select this as Wired Device if you are connecting via an Ethernet cable.

The VOX ELECTRONICS UHD 55DSW552V cannot connect to networks with a hidden SSID. To make your modem’s SSID visible, you should change your SSID settings via the modem’s software.

To configure wireless device settings:

Open the Network menu and select Network Type as Wireless Device to start the connection process.

Highlight the Scan Wireless Networks option and press OK to start a search for available wireless networks. All found networks will be listed. Highlight your desired network from the list and press OK to connect.

If the selected network is password-protected, enter the correct key using the virtual keyboard. You can use this keyboard via the directional buttons and the OK button on the remote control. Wait until the IP address is shown on the screen. This means that the connection is now established.

To disconnect from a wireless network, highlight Network Type and press Left or Right buttons to set as Disabled.

If your router has WPS, you can directly connect the modem/router without entering a password or adding the network first. Highlight Press WPS on your wifi router option and press OK. Go to your modem/router device and press the WPS button on it to make the connection. You will see a connection confirmation on your VOX ELECTRONICS UHD 55DSW552V once the devices have paired. Select OK to proceed. No further configuration is required.

Highlight Internet Speed Test and press the OK button on the VOX ELECTRONICS UHD 55DSW552V. The VOX ELECTRONICS UHD 55DSW552V will check the internet connection bandwidth and display the result when complete.

Highlight Advanced Settings and press the OK button on the VOX ELECTRONICS UHD 55DSW552V. On the next screen, you can change the IP and DNS settings of the VOX ELECTRONICS UHD 55DSW552V. Highlight the desired one and press Left or Right button to change the setting from Automatic to Manual. Now you can enter the Manual IP and/or Manual DNS values. Select the related item in the drop-down menu and enter the new values using the numeric buttons of the remote. Highlight Save and press the OK button to save settings when complete.

If your mobile device has WLAN feature, you can connect it to your VOX ELECTRONICS UHD 55DSW552V via a router to access the content in your device. For this, your mobile device must have appropriate sharing software.

Connect your VOX ELECTRONICS UHD 55DSW552V to your router following the steps mentioned in the sections above. Afterwards, connect your mobile device to the router and then activate the sharing software on your mobile device. Then, select files that you want to share with your VOX ELECTRONICS UHD 55DSW552V.

If the connection is established correctly, you will be able to access the shared files installed on your mobile device via the Audio Video Sharing (AVS) feature of your VOX ELECTRONICS UHD 55DSW552V.

Highlight the AVS option in the Sources menu and press OK; available media server devices in the network will be displayed. Select your mobile device and press the OK button to continue.

If available, you can download a virtual remote controller application from the server of your mobile device application provider.

Wake-on-LAN (WOL) and Wake-on-Wireless LAN (WoWLAN) are standards that allow a device to be turned on or woken up by a network message. The message is sent to the device by a program executed on a remote device connected to the same local area network, such as a smartphone.

Your VOX ELECTRONICS UHD 55DSW552V is WoL and WoWLAN compatible. This feature might be disabled during the First Time Installation process. To enable this feature, set the Wake On option in the Network menu as On. It is necessary that both the device, from which the network message will be sent to the VOX ELECTRONICS UHD 55DSW552V, and the VOX ELECTRONICS UHD 55DSW552V are connected to the same network. The Wake On feature is only supported for Android OS devices and can only be used via YouTube and Netflix applications.

In order to use this feature, the VOX ELECTRONICS UHD 55DSW552V and the remote device should be connected at least once while the VOX ELECTRONICS UHD 55DSW552V is on. If the VOX ELECTRONICS UHD 55DSW552V is powered off, the connection should be re-established the next time it is switched on. Otherwise, this feature will be unavailable. This does not apply when the VOX ELECTRONICS UHD 55DSW552V is switched into standby mode.

If you want your VOX ELECTRONICS UHD 55DSW552V to consume less power in standby mode, you can disable this feature by setting the Wake On option as Off.

Wireless Display is a standard for streaming video and sound content. This feature provides the ability to use your VOX ELECTRONICS UHD 55DSW552V as a wireless display device.

To use it, plug the wireless USB dongle to the VOX ELECTRONICS UHD 55DSW552V first, if it doesn’t have an internal WLAN feature. Then press the Source button on the remote and switch to Wireless Display source. A screen appears stating that the VOX ELECTRONICS UHD 55DSW552V is ready for connection. Open the sharing application on your mobile device. Scan for devices. After you select your VOX ELECTRONICS UHD 55DSW552V and connect, the screen of your device will be displayed on your VOX ELECTRONICS UHD 55DSW552V.

If the wireless network is not available on your VOX ELECTRONICS UHD 55DSW552V:

• Ensure that any firewalls of your network allow the VOX ELECTRONICS UHD 55DSW552V wireless connection.
• Try searching for wireless networks again, using the Network menu screen.
• If the wireless network does not function properly, try using the wired network in your home. Refer to the Wired Connectivity section for more information on the process.
• If the VOX ELECTRONICS UHD 55DSW552V does not function using the wired connection, check the modem (router). If the router does not have a problem, check the internet connection of your modem.

If the internet connection is slow on your VOX ELECTRONICS UHD 55DSW552V, refer to the instruction book of your wireless modem to get information on the internal service area, connection speed, signal quality and other settings. You need to have a high speed connection for your modem.

If there are disruptions during playback or slow reactions on your VOX ELECTRONICS UHD 55DSW552V, you could try the following:

• Keep at least three meters distance from microwave ovens, mobile telephones, Bluetooth devices or any other WLAN compatible devices.
• Try changing the active channel on the WLAN router.

If the MAC address (a unique identifier number) of your PC or modem has been permanently registered, it is possible that your VOX ELECTRONICS UHD 55DSW552V might not connect to the internet. In such a case, the MAC address is authenticated each time when you connect to the internet. This is a precaution against unauthorized access. Since your VOX ELECTRONICS UHD 55DSW552V has its own MAC address, your internet service provider cannot validate the MAC address of your VOX ELECTRONICS UHD 55DSW552V. For this reason, your VOX ELECTRONICS UHD 55DSW552V cannot connect to the internet.

It is also possible that the connection may not be available due to a firewall problem. If you think this causes your problem, contact your internet service provider. A firewall might be the reason for a connectivity and discovery problem while using the VOX ELECTRONICS UHD 55DSW552V in Audio Video Sharing mode or while browsing via the Audio Video Sharing feature.

Ensure that you have already logged on to your PC with an authorized username/password and also ensure that your domain is active, prior to sharing any files in your media server program on your PC with the VOX ELECTRONICS UHD 55DSW552V. If the domain is invalid, this might cause problems while browsing files in Audio Video Sharing mode.

Audio Video Sharing feature on the VOX ELECTRONICS UHD 55DSW552V uses a standard that eases the viewing process of digital electronics and makes them more convenient to use on a home network. This standard allows you to view and play photos, music and videos stored in the media server connected to your home network.

Server Software Installation:

The Audio Video Sharing feature cannot be used if the server programme is not installed onto your PC or if the required media server software is not installed onto the companion device. Prepare your PC with a proper server programme.

Connect to a Wired or Wireless Network:

Refer to the Wired/Wireless Connectivity chapters for detailed configuration information.

Enable Audio Video Sharing:

Enter the Settings>System>More menu and enable the Audio Video Sharing option.

Play Shared Files via Media Browser:

Highlight the AVS option in the Sources menu by using the directional buttons and press OK. Available media server devices in the network will be listed. Select one and press OK to continue. The media browser will then be displayed.

You can access the applications installed on your VOX ELECTRONICS UHD 55DSW552V from the Apps menu. Highlight an app and press OK to launch.

To manage the apps installed on your VOX ELECTRONICS UHD 55DSW552V, add new apps from the market, or to see all available apps in full screen mode, highlight the Add More option and press OK. Using this menu option, you can add an installed app to the Home menu, launch or remove it. Removed apps will no longer be accessible from the Apps menu. You can also add new apps from the market.

To enter the market, highlight the shopping basket logo located on the upper left side of the screen and press OK. Available apps in the market will be displayed. Use directional buttons to highlight an app and press OK. Highlight Add to Apps option and press OK again to add the selected app to the Apps menu. For quick access to the Add More menu, you can press the Internet button on the remote, if this button is available.

To use the internet browser on your VOX ELECTRONICS UHD 55DSW552V, enter the Apps menu first. Then launch the internet browser application which has an orange coloured logo with an earth symbol on it.

In the initial screen of the browser, the thumbnails of the predefined (if any) links to websites available will be displayed as Speed Dial options along with the Edit Speed Dial and the Add to Speed Dial options. To navigate the web browser, use the directional buttons on the remote or a connected mouse. To see the browser options bar, move the cursor to the top of the page or press the Back/Return button. History, Tabs and Bookmarks options and the browser bar which contains previous/next buttons, the refresh button, the address/search bar, the Speed Dial and the Vewd buttons are available.

To add a desired website to the Speed Dial list for quick access, move the cursor to the top of the page or press the Back/Return button. The browser bar will appear. Highlight the Speed Dial – button and press the OK button. Then select the Add to Speed Dial option and press the OK button. Fill in the blanks for Name and Address, highlight OK and press the OK button to add. Whilst you are on the site you wish to add to the Speed Dial list, highlight the Vewd button and press the OK button. Then highlight Add to Speed Dial option in the submenu and press the OK button again. Name and Address will be filled automatically according to the site you are visiting. Highlight OK and press the OK button to add.

You can also use the Vewd menu options to manage the browser. Highlight the Vewd button and press the OK button to see available page-specific and general options.

There are various ways to search or visit websites using the web browser:

• Enter the address of a website (URL) into the search/address bar and highlight the Submit button on the virtual keyboard and press the OK button to visit the site.
• Enter keywords into the search/address bar and highlight the Submit button on the virtual keyboard and press the OK button to start a search for the related websites.
• Highlight a Speed Dial thumbnail and press the OK button to visit the related website.

Your VOX ELECTRONICS UHD 55DSW552V is compatible with USB mice. Plug your mouse or wireless mouse adaptor into the USB input of your VOX ELECTRONICS UHD 55DSW552V for easier and quicker navigation.

HbbTV (Hybrid Broadcast Broadband TV) is a new industry standard that seamlessly combines VOX ELECTRONICS UHD 55DSW552V services delivered via broadcast with services delivered via broadband and also enables access to Internet-only services for consumers using connected VOX ELECTRONICS UHD 55DSW552V and set-top boxes. Services delivered through HbbTV include traditional broadcast TV channels, catch-up services, video-on-demand, electronic programme guide, interactive advertising, personalisation, voting, games, social networking and other multimedia applications.

HbbTV applications are available on channels where they are signalled by the broadcaster. The broadcaster marks one application as “autostart”, and this one is started by the platform automatically. The autostart applications are generally launched with a small red button icon to notify the user that there is an HbbTV application on that channel. Press the red button to open the application page. After the page is displayed, you can go back to the initial red button icon state by pressing the red button again. You can toggle between the red button icon mode and full UI mode of the application via pressing the red button.

It should be noted that the red button switching capability is provided by the application, and some applications may behave differently (other colour buttons such as green, yellow, blue, may be defined for some other functions, e.g., shortcuts).

If you switch to another channel while an HbbTV application is active (either in red button icon mode or full UI mode), the following scenarios can occur:

• The application can continue running.
• The application can be terminated.
• The application can be terminated, and another autostart red button application can be launched.

HbbTV allows applications to be retrieved both from broadband or broadcast. The broadcaster may enable both ways or one of them. If the platform does not have an operational broadband connection, the platform can still launch applications transmitted on broadcast. The autostart red button applications generally provide links to other applications. The user can then switch to other applications by using the links provided. The applications should provide a way to terminate themselves, usually the Exit button is used for this.

HbbTV applications use keys on the remote control to interact with the user. When an HbbTV application is launched, the control of some keys are owned by the application. For example, numeric channel selection may not work on a teletext application where the numbers indicate teletext pages.

HbbTV requires AV streaming capability for the platform. There are numerous applications providing VOD (video on demand) and catch-up TV services. The user can use play, pause, stop, forward, and rewind keys on the remote control to interact with the AV content.

Smart Center is a mobile application running on iOS and Android platforms. With your tablet or phone, you can easily stream your favourite live shows and programmes from your VOX ELECTRONICS UHD 55DSW552V. You can also launch your applications, use your tablet as a remote control for your VOX ELECTRONICS UHD 55DSW552V and share media files.

To use internet-based features, your modem/router must be connected to the internet. Make sure the VOX ELECTRONICS UHD 55DSW552V and mobile device are connected to the same network.

For media sharing, the Audio Video Sharing option should be enabled (if available). Press the Menu button on the remote, select Settings>System>More menu and press OK. Highlight Audio Video Sharing and change as Enabled. Your VOX ELECTRONICS UHD 55DSW552V is ready to connect to your mobile device. Install the Smart Center application onto your mobile device. Start the Smart Center application. If all connections are configured properly, you will see your VOX ELECTRONICS UHD 55DSW552V’s name on your mobile device. If your VOX ELECTRONICS UHD 55DSW552V’s name doesn’t appear on the list, wait a while and tap on the Refresh widget. Select your VOX ELECTRONICS UHD 55DSW552V from the list.

On the main screen of the Smart Center application for the VOX ELECTRONICS UHD 55DSW552V, you can find tabs to access various features:

• **MY CHANNELS:** The programmes of the first four channels from the channel list retrieved from the VOX ELECTRONICS UHD 55DSW552V are shown. You can change the listed channels by pressing on the channel thumbnail and holding. A list of channels will be displayed, and you can choose your desired channel to be replaced.
• **TV:** You can watch content through the TV tab. In this mode, you can navigate through the channel list retrieved from your VOX ELECTRONICS UHD 55DSW552V and click on thumbnails to view detail pages.
• **RECORDINGS:** You can view your active recordings (if available) and reminders through this tab. To delete any item, simply press on the delete icon found on each row.
• **EPG (Electronic programme guide):** You can view the broadcast schedules of selected channel lists through this tab. You can also navigate through channels by pressing on the selected channel on the EPG grid. Updating/refreshing the EPG information may take a while depending on your network and web service quality.
• **SETTINGS:** Configure the application to your liking. You can change:
  • **Auto-lock (Only in iOS):** The screen of the device automatically turns off after a certain amount of time. Default is off.
  • **Auto-enable FollowMeTV:** FollowMeTV function (if available) will start automatically when this setting is enabled. Default is disabled.
  • **Auto-connection to TV:** When enabled, your mobile device will automatically connect to the last connected VOX ELECTRONICS UHD 55DSW552V and skips the VOX ELECTRONICS UHD 55DSW552V search screen.
  • **Change TV (Only in iOS):** Shows the currently connected VOX ELECTRONICS UHD 55DSW552V. You can press on this setting to go to the “TV search” screen and change to a different VOX ELECTRONICS UHD 55DSW552V.
  • **Edit custom channel list:** You can edit your custom channel list using this setting.
  • **Choose channel list source:** You can choose the channel list source to be used in the application. The options are “TV List” and “Custom List”. Additionally, you can activate “Remember my choice” option to set the selected channel list source as a constant choice.
  • **Version No:** Displays the current version of the application.

To open the detail page on the Smart Center application for the VOX ELECTRONICS UHD 55DSW552V, tap on a programme. On the detail page screen, you can get detailed information about the programmes you select. There are “Details”, “Cast&Crew” and “Videos” tabs to find on this page.

• **DETAILS:** This tab provides a summary and information about the selected programme. Also, there are links to Facebook and Twitter pages of the programme selected.
• **CAST&CREW:** Shows all the people contributed to the current programme.
• **VIDEOS:** Provides videos on YouTube related to the selected programme.

Tap on the FOLLOW ME TV widget located at the bottom left of the screen of your mobile device to change the layout for the FollowMe TV feature with the Smart Center application on your VOX ELECTRONICS UHD 55DSW552V.

Tap the play icon to start streaming of the content from the VOX ELECTRONICS UHD 55DSW552V to your mobile device. This is available if your device is in your router’s operation range.

Mirror Mode is enabled by default and allows streaming the content from any other selected VOX ELECTRONICS UHD 55DSW552V sources and Media Browser.

To access the Media Share widget on the Smart Center application for the VOX ELECTRONICS UHD 55DSW552V, tap on the Up-arrow on the bottom left side of the screen.

If the Media Share widget is pressed, a screen is displayed where you can select the media file type to share with your VOX ELECTRONICS UHD 55DSW552V.

You can use your mobile device as a remote control for your VOX ELECTRONICS UHD 55DSW552V once it has connected to the VOX ELECTRONICS UHD 55DSW552V. To use smart remote’s full features, tap on the Up-arrow on the bottom left side of the screen.

Voice Recognition:

You can tap on the Microphone (0) widget and manage your application, giving voice commands such as “Volume Up/Down!”, “Programme Up/Down!”. This feature is only for Android-based devices.

Keyboard Page:

The keyboard page can be opened in two ways: by pressing the Keyboard (B) widget on the application screen or automatically by receiving a command from the VOX ELECTRONICS UHD 55DSW552V.

The requirements for using the Smart Center application with the VOX ELECTRONICS UHD 55DSW552V are:

• VOX ELECTRONICS UHD 55DSW552V
• Network connection
• Mobile Device based on Android or iOS platform (Android OS 4.0 or higher; iOS 6 or higher version)
• Smart Center app (to be found on online application stores based on Android and iOS platforms)
• Router modem
• USB storage device in FAT32 format (required for USB Recording feature, if available)