FREE ENGLISH VEVOR ZDM-2366 (01) PDF USER GUIDE
FREE ENGLISH VEVOR ZDM-2366 (01) PDF USER MANUAL
FREE ENGLISH VEVOR ZDM-2366 (01) PDF OWNER GUIDE
FREE ENGLISH VEVOR ZDM-2366 (01) PDF OWNER MANUAL
FREE ENGLISH VEVOR ZDM-2366 (01) PDF REFERENCE GUIDE
FREE ENGLISH VEVOR ZDM-2366 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH VEVOR ZDM-2366 (01) PDF REFERENCE MANUAL
FREE ENGLISH VEVOR ZDM-2366 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH VEVOR ZDM-2366 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD VEVOR ZDM-2366 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What precautions should be taken during assembly?
1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Folding Door Gate.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
What precautions should be taken to prevent serious injury and death from tipping?
1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Folding Door Gate.
4. Use as intended only.
5. Inspect before every use. Do not use if parts are loose or damaged.
What are the technical specifications for the ZDM-153 and ZDM-2366 models?
| Model | ZDM-153 | ZDM-2366 |
|---|---|---|
| Product Dimensions (LxWxH)(mm) | 1610*40*3000 | 3660*40*2210 |
| Packing Size (LxWxH)(mm) | 1650*185*190 | 2260*190*190 |
| Net Weight (kg) | About 19.6 | About 27.9 |
| Gross Weight (kg) | About 20.85 | About 30.55 |
What is included in the package contents?
A: Padlock with keys
B: 16 Screws
C: 16 Plastic expansion screws
F: Casters
How do I assemble and install the folding door gate?
Note: Product images are shown for display purposes only and may not be representative of the final product.
Using Step
Step 1: Unpack the product and take out the 2 retractable doors. Install the telescopic door on one side first. Place the retractable door in the position where it needs to be used. Open the hinges, position them in the actual position on the wall and make the holes.
Step 2: Place the plastic expansion screws (Serial C in the accessories list) in the perforated position, hold the door in place and fix it with the self-tapping screws (Serial B in the accessories list).
Step 3: Install the telescopic door on the other side as described above.
Step 4: Pull the two telescopic doors into position, turn the clasp on the middle side post, fasten it to the lock and lock the door with the key.
Caution: Keep hands and fingers out of moving diamonds of web when handling gate.
CLICK HERE TO DOWNLOAD VEVOR ZDM-2366 (01) PDF MANUAL