VEVOR TK-10T (01) PDF MANUAL

FREE ENGLISH VEVOR TK-10T (01) PDF USER GUIDE

FREE ENGLISH VEVOR TK-10T (01) PDF USER MANUAL

FREE ENGLISH VEVOR TK-10T (01) PDF OWNER GUIDE

FREE ENGLISH VEVOR TK-10T (01) PDF OWNER MANUAL

FREE ENGLISH VEVOR TK-10T (01) PDF REFERENCE GUIDE

FREE ENGLISH VEVOR TK-10T (01) PDF INSTRUCTION GUIDE

FREE ENGLISH VEVOR TK-10T (01) PDF REFERENCE MANUAL

FREE ENGLISH VEVOR TK-10T (01) PDF INSTRUCTION MANUAL

FREE ENGLISH VEVOR TK-10T (01) PDF OPERATING INSTRUCTIONS

CLICK HERE TO DOWNLOAD VEVOR TK-10T (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What are the essential safety warnings before using the Pulley Hoist?

Read the safety material before using this product. Failure to do so can result in serious injury. Follow manufacturer instructions and safety recommendations, especially in special environments.

Is this Pulley Hoist a toy?

This product is not a toy. Do not allow children to play with this item.

How should the Pulley Hoist be used?

Use as intended only.

Should I overload the Pulley Hoist?

Do not overload; ensure use within its bearing capacity.

What specific pre-use checks and maintenance are required for models TK-10T & TK-15T?

Please check if the pulley hoist is deformed before use; if so, remember to replace it with a new one.

Add grease before use, so that the pulley can be used better.

How is the Pulley Hoist typically used?

The pulley hoist, often referred to as a snatch block, is typically used in winching operations. An application example involves anchoring the snatch block (e.g., via a tree strap and D-ring shackle), routing the winch cable through the snatch block pulley, and attaching the winch hook back to the vehicle (often via another D-ring shackle). This setup can be used to change the direction of the pull or increase the pulling power of the winch. A winch damper should also be used on the cable for safety.

What are the specifications for the TK-10T, TK-15T, and TK-13.5T Pulley Hoists?

Items	Model	TK-10T	TK-15T	TK-13.5T
1	Working Load Limit(lbs)	11000	33000	16000
2	Breaking Load(lbs)	22000	66000	32000
3	Rope type	steel cable or synthetic rope
4	Rope Size	10-14mm		<3/8inch