FREE ENGLISH VEVOR YS-05-1 (01) PDF DOCUMENT.
FREE ENGLISH VEVOR YS-05-1 (01) PDF USER GUIDE.
FREE ENGLISH VEVOR YS-05-1 (01) PDF USER MANUAL.
FREE ENGLISH VEVOR YS-05-1 (01) PDF OWNER GUIDE.
FREE ENGLISH VEVOR YS-05-1 (01) PDF OWNER MANUAL.
FREE ENGLISH VEVOR YS-05-1 (01) PDF REFERENCE GUIDE.
FREE ENGLISH VEVOR YS-05-1 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH VEVOR YS-05-1 (01) PDF REFERENCE MANUAL.
FREE ENGLISH VEVOR YS-05-1 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH VEVOR YS-05-1 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD VEVOR YS-05-1 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the specifications for the Roof Pipe Boot model YS-05-1?
| Model | YS-05-1 |
| Adaptive pipe diameter range (inch) | 10-18 |
| Material | NE-5160 |
| Color | Red |
How do I install the Roof Pipe Boot?
Step 1: Cut your pipe flashing openings to fit. (The cutting size should be about 20% smaller than the pipe diameter.)
Step 2: Slide the flashing into the tube and install the aluminum base to the roof surface.
Step 3: Seal the base with silicone by squeezing in the sealant and pressing the base.
Step 4: Fix pipe flashing with roof screws.
CLICK HERE TO DOWNLOAD VEVOR YS-05-1 (01) PDF DOCUMENT