Free English VETEK OCS-V (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD VETEK OCS-V (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How should I care for and maintain the VETEK OCS-V for good performance and precise measurement?
For good performance and precise measurement, be careful with daily operation and maintenance:
Do NOT overload the VETEK OCS-V. This will damage the loadcell and void the warranty.
Do NOT leave load hung on the scale for long. This will decrease the scale’s accuracy and shorten the loadcell’s life.
Inspect the shackle and hook before using. Check clips, pins and screws regularly.
Check the battery frequently. When the VETEK OCS-V runs out of power, replace the dead batteries with new ones.
Rotate the load rather than the scale if needed.
Do NOT use the VETEK OCS-V under thunder or rain.
Hang the VETEK OCS-V on a shelf in a dry and well-ventilated room. Do NOT place the scale on the ground directly.
Do NOT attempt to repair the VETEK OCS-V yourself. Contact your local representative.
Do NOT use external chargers, Use the original DC5V charger.
What are the specifications of the VETEK OCS-V High Resolution Digital Crane Scale?
The specifications for the VETEK OCS-V are as follows:
| Accuracy | Chinese GB/T 11883-2002 CIII eqv. OIML R76 |
| Tare Range | 100% F.S. |
| Zero Range | 4% F.S. |
| Stable Time | ≤10sec |
| Overload | 100% F.S. + 9e |
| Safety Load | 120% F.S. |
| Battery | 18650 lithium battery DC5V charger |
| Battery Life | >20hour |
| Display | 115*41mm LED display |
| Op. Temp. | -10°C ~ +40°C |
What are the functions of the VETEK OCS-V Scale Keys?
The functions of the VETEK OCS-V Scale Keys are as follows:
| Key | Name | Function |
|---|---|---|
| (Power button icon) | On/Off | Power-on; Power-off |
| -0- | Zero | Zero; |
| (Lock icon) | Hold | Lock/unlock; |
| -T- | Tare | Tare in/out; |
What are the functions of the VETEK OCS-V Remote Keys?
The functions of the VETEK OCS-V Remote Keys are as follows:
| Key | Name | Function |
|---|---|---|
| (0 button icon) | Zero | Zero; Change digit; |
| (T button icon) | Tare | Tare in/out; Move digit; |
| (Lock icon) | Hold | Lock or unlock; Confirm &Next |
| ACC | Acc. | 2nd function; Change digit; |
| DEL | Del. | 2nd function; Move digit |
| F1 | F1 | 2nd function; |
| F2 | F2 | Unit Switch; |
| (Power button icon) | Off | Long press to power off; |
| (Up arrow icon) | 2nd | 2nd function; |
How do I enter the User Setup menu on the VETEK OCS-V?
Press (Up arrow icon) first then press (Lock icon) to enter the User Setup menu. “SELUP” shows.
How do I access and set the Auto-Off Timing on the VETEK OCS-V?
To enter Auto-Off Timing, press (Lock icon). “OFF–” shows.
Press (0 button icon) or ACC to change the timing value.
Auto-Off Timing can be set to: 0 (disabled), 5 (5min), 10 (10min), 15 (15min), 30 (30min), 60 (60min).
How do I access and set the Display Brightness on the VETEK OCS-V?
To enter Backlight Brightness, press (Lock icon). “br—” shows.
Press (0 button icon) or ACC to change the brightness value.
Display Brightness can be set to 0-7 levels.
How do I access and set the Idle Mode Timing on the VETEK OCS-V?
To enter Idle Mode Timing, press (Lock icon). “idE—” shows.
Press (0 button icon) or ACC to change the timing value.
Idle Mode Timing can be set to: 0(disabled), 5(5sec), 10(10sec), 15(15sec), 30(30sec), 60 (60sec). It is 30sec by default.
How do I exit the User Set on the VETEK OCS-V?
Press (Lock icon) to exit User Set.
CLICK HERE TO DOWNLOAD VETEK OCS-V (01) PDF DOCUMENT