VERIZON ASUS ZENFONE V V520KL (01) PDF Document

To ensure safe operation of your VERIZON ASUS ZENFONE V V520KL, follow these guidelines:

Road safety comes first. Do not use your device when driving or operating any type of vehicle.

This device should only be used in environments with ambient temperatures between 0°C (32°F) and 35°C (95°F).

Turn off your device in restricted areas where the use of mobile devices is prohibited, such as aircraft, movie theaters, hospitals, near medical equipment, near gas or fuel, construction sites, and blasting sites.

Use only AC adapters and cables approved for use with this device. Check the rating label on the bottom of the device to ensure the power adapter complies.

Do not use damaged power cables, accessories, or other peripherals.

Keep your device dry. Do not use or expose the device near liquids, rain, or moisture.

You can put the device through x-ray machines (conveyor belts for airport security), but do not expose it to magnetic detectors and wands.

The device screen is made of glass. If the glass breaks, stop using the device and do not touch the broken parts. Send the device for repair to qualified service personnel.

Do not listen at high volume levels for long periods to prevent possible hearing damage.

Disconnect the AC power before cleaning your device. Use only a clean cellulose sponge or chamois cloth when cleaning the screen.

The VERIZON ASUS ZENFONE V V520KL supports microSD, microSDHC, and microSDXC memory cards with up to 128 GB of capacity.

Step 1. With the phone facing up, insert the tool that came with your phone into the hole on the SIM/microSD card tray and gently press to open the tray.

Step 2. Place the microSD card into the tray with the gold contacts facing down.

Step 3. Gently push the tray back in until it is securely closed.

Note: Be careful not to damage the card slot cover or injure your fingernails when removing the cover. Do not forcibly remove, shear, or distort the card slot cover.

Step 1. Eject the memory card properly by going to Home > All Apps > Settings > Storage and tapping the Eject icon.

Step 2. With the phone facing up, insert the tool into the hole on the SIM/microSD card tray and gently press to open the tray.

Step 3. Remove the microSD card from the tray.

Step 4. Gently push the tray back in until it is securely closed.

Step 1. With the phone facing up, insert the tool that came with your phone into the hole on the SIM/microSD card tray and gently press to open the tray.

Step 2. Place the nano SIM card into the slot with the gold contacts facing down.

Step 3. Gently push the tray back in until it is securely closed.

Note: To prevent connector damage, ensure you use a standard nano SIM card without a SIM adapter or the use of a cutter.

Step 1. Connect the USB Type-C cable to the power adapter.

Step 2. Connect the USB Type-C cable to your VERIZON ASUS ZENFONE V V520KL.

Step 3. Plug the power adapter into a grounded power outlet.

Step 4. When fully charged, disconnect the USB cable from the phone first before unplugging the AC power adapter from the outlet.

Important: Charge the device for eight (8) hours before using it in battery mode for the first time. Use only the bundled power adapter and cable to avoid damaging the device.

You can preserve battery life by following these tips:

– Close all running apps that are not in use.

– When not in use, press the power button to put the device in sleep mode.

– Activate Power Saving in Power Management settings.

– Decrease the brightness of the display.

– Keep the speaker volume at a low level.

– Disable Wi-Fi, Bluetooth, GPS, and PlayTo features when not needed.

– Disable the screen auto-rotate feature.

– Disable all auto-sync features on the device.

To turn the power on: Press and hold the Power button.

To turn the power off: Press and hold the Power button, then tap Power off > OK.

To suspend the device: Press the Power button once. You can also double-tap the blank screen from the home page to suspend the device.

Step 1. Ensure the fingerprint identification module and your finger are clean and dry.

Step 2. Launch the Settings screen by tapping the Settings icon in Quick Settings or the All Apps screen.

Step 3. Select Lock screen.

Step 4. Tap Screen lock and then select Fingerprint.

Step 5. Follow the instructions to set up a backup screen lock method (Pattern, PIN, or Password).

Step 6. Select how you want notifications to display on the lock screen and tap Done.

Step 7. Tap Next and place your finger on the home button repeatedly, adjusting your finger to cover different areas until the fingerprint is captured.

Step 8. Tap Done to complete the setup.

You can choose from the following options to secure your device:

Swipe: Swipe up to unlock the phone.

PIN: Enter at least four numbers to set a PIN.

Pattern: Slide your finger on the dots to create a pattern (minimum of four dots).

Password: Enter at least four characters to create a password.

Fingerprint: Use the fingerprint sensor on the home button to unlock the device.

Step 1. Launch Quick settings and tap the Settings icon.

Step 2. Select Lock screen.

Step 3. Tap Quick access.

Step 4. Under the Quick access screen, select the app icon you want to replace.

Step 5. Select the new app you want to appear on the Quick access screen from the list provided.

To launch the Quick settings panel, swipe down with two fingers from the top of the screen. A blue button indicates a feature is enabled, while a gray button indicates it is disabled.

To add or remove buttons:

Step 1. Launch Quick settings and tap the Edit icon.

Step 2. Drag and drop a button or tile up or down to add or remove it from the panel.

Step 3. Tap the back arrow to view the current panel.

To add widgets: Tap and hold an empty area on the Home screen and select Widgets. Tap and hold a widget and drag it to an empty area.

To remove widgets: Tap and hold the widget and drag it to Remove at the top of the screen.

To apply wallpaper: Tap and hold an empty area on the Home screen and select Wallpapers. You can adjust the background tint, select a color, and tap Apply.

To edit the Home screen: Tap and hold an empty area and select Edit Home screen to change icon size, alignment, scroll effects, and font size.

Navigate to Settings > Power management to select a battery mode:

High Performance: Adjusts CPU performance for high brightness levels.

Normal: Intelligently adjusts CPU performance and brightness.

Power saving: Disables Wi-Fi and mobile network temporarily when the device is in sleep mode.

Super saving: Keeps alarm settings active while turning off Wi-Fi, mobile network, location, and Bluetooth.

Customized: Allows users to manually configure brightness level and network behavior.

Step 1. Tap the All Apps icon and then select Settings.

Step 2. Slide down and tap System updates.

Step 3. Tap Check for new system update.

Important: This feature erases all data from the internal storage of your device.

Step 1. Tap the All Apps icon and then select Settings > Backup & reset.

Step 2. Tap Factory data reset.

Note: You can also use Network settings reset to only reset Wi-Fi, mobile network, and Bluetooth, or System settings reset to return the system to default settings without affecting downloaded apps or personal data.

To launch the app: Tap All Apps > Contacts.

To set up your profile: Launch Contacts and tap SET UP MY PROFILE or ME. Fill in your name and details, then tap the checkmark icon.

To add a contact: Tap the plus (+) icon, fill in the information, and tap the checkmark icon.

To import contacts: Launch Contacts, tap the menu icon > Manage contacts > Import/Export. Select the source and destination, tick the desired contacts, and tap Import.

To export contacts: Launch Contacts, tap the menu icon > Manage contacts > Import/Export. Select the destination and source, tick the contacts, and tap Export.

The device includes several camera modes:

HDR Pro: Balances colors in low-light or high-contrast scenes.

Beautification: Allows live beauty enhancements on a subject’s face.

Low light: Increases light sensitivity by up to 400% for dim conditions.

Night: For capturing well-lit photos during nighttime.

Depth of field: Creates macro shots with a soft background blur.

Panorama: Stitches images captured from various angles together.

Miniature: Simulates the tilt-shift effect of DSLR lenses.

Time Rewind: Captures a timeline of images starting before the shutter is pressed.

Slow motion: Records videos for slow-motion playback.

Time lapse: Captures stills at intervals for fast-forward playback.

Step 1. Launch Settings by tapping the icon in Quick settings or the All Apps menu.

Step 2. Slide the Wi-Fi switch to the right to turn it on.

Step 3. Tap Wi-Fi to display detected networks.

Step 4. Tap a network name. If it is secured, enter the password when prompted.

Note: To disable Wi-Fi, slide the switch to the left.

Important: Turning on the Mobile Hotspot disables Wi-Fi connection. Ensure mobile data is turned on first.

Step 1. Go to Settings > Mobile Hotspot and Tethering > Set up Mobile Hotspot.

Step 2. Assign a unique SSID (network name) and a strong password, then tap Save.

Step 3. Tap the Mobile Hotspot switch to turn it on.

Step 4. Connect other devices using the SSID and password you created.