Free English UNOLD 86715 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD UNOLD 86715 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications of the UNOLD 86715?
The technical specifications for the UNOLD 86715 are as follows:
Power: 35 watt, 220–240 V~, 50 Hz
Dimensions: Approx. 33.5 x 23 x 47.5 cm (D/W/H)
Weight: Approx. 3.1 kg
Diameter: 33 cm
Power cord length: Approx. 160 cm
Housing: Metal
Features: 3 speed levels, oscillation can be switched on, carrying handle on the housing
What are the safety instructions for operating the UNOLD 86715?
To safely operate the UNOLD 86715, adhere to the following guidelines:
Only switch the UNOLD 86715 on when it has been properly assembled.
Maintain at least 50 cm of space between the UNOLD 86715 and other objects.
Do not use the UNOLD 86715 in extremely dusty rooms or near flammable substances.
Only connect the UNOLD 86715 to alternating current with voltage corresponding to the rating plate.
The UNOLD 86715 must not be operated with an external timer or remote control system.
Never immerse the UNOLD 86715 or the power cord in water or other liquids.
Do not open the motor housing of the UNOLD 86715, as this presents a danger of electric shock.
Ensure the power cord is placed so that there is no risk of stumbling over it.
Never wrap the power cord around the UNOLD 86715 to avoid damage to the cord.
Always unplug the UNOLD 86715 by grasping the plug, never by pulling the cord.
Ensure the outlet used is easily accessible for emergency unplugging.
Do not use the UNOLD 86715 with an external speed controller.
Never leave the UNOLD 86715 running unattended.
Never stick objects like fingers, needles, or pins through the basket grille into the interior of the UNOLD 86715.
Ensure long hair cannot be caught by the impeller.
Always operate the UNOLD 86715 on a level, stable substrate to prevent it from tipping over.
How do I assemble the UNOLD 86715?
Follow these steps to assemble the UNOLD 86715:
1. Ensure you are assembling the UNOLD 86715 in a flat and dry location.
2. Remove all packaging materials and transport guards, but do not remove the type plate or serial number.
3. Inspect the UNOLD 86715 for damage; do not operate if damaged.
4. Verify that all required parts are present. If a fabric tube is on the axle, it is for transport protection and can be removed.
5. Loosen the attachment screw and nut from the top of the tube.
6. Remove the screw of the base fastener from the bottom of the tube.
7. Insert the tube into the recess at the top of the base, turn it over while holding it to access the bottom.
8. Align the screw of the base fastener in the opening of the base and tighten it to attach the base to the fan housing.
9. Turn the base and stand pipe over and place it on a flat, stable surface.
10. Remove the locking screw No. 3 from the motor unit. Place the motor unit on the tube, ensuring the openings on the hinge bracket align with the slots on the tube.
11. Feed attachment bolt No. 4 through both openings. Insert fastening pin No. 5 into the opening above the attachment bolt to secure the parts.
12. Attach lock nut No. 6 to the protruding side of attachment bolt No. 4 and tighten it.
13. Tighten locking screw No. 3 on the other side of the fastening pin.
How do I adjust the tilt angle of the UNOLD 86715?
To adjust the vertical tilt angle of the UNOLD 86715, slightly loosen the lock nut for the tilt angle, move the motor housing of the UNOLD 86715 to the desired position, and tighten the nut again.
How do I select the speed settings on the UNOLD 86715?
Turn on the UNOLD 86715 by selecting a level on the rotary switch (No. 2):
Level 1: light breeze
Level 2: medium breeze
Level 3: strong breeze
Level 0: turns off the UNOLD 86715
How do I activate the oscillation function of the UNOLD 86715?
To enable the swivel function of the UNOLD 86715, press the oscillation button on the head of the UNOLD 86715 downward. To turn off the oscillation, pull the oscillation button upward.
How do I clean the UNOLD 86715?
Before cleaning the UNOLD 86715, switch it off, set the rotary switch to 0, and unplug it. Wait until the UNOLD 86715 has come to a complete stop.
1. Never use scouring agents, steel wool, metal objects, hot cleaners, or disinfectants on the UNOLD 86715.
2. Wipe the stand tube and grille of the UNOLD 86715 with a slightly damp cloth.
3. To clean the fan wheel, loosen the small screw on the basket grille, remove the front half of the basket, and clean the fan wheel carefully with a soft cloth before reassembling all parts correctly.
4. Always keep the motor and electrical components of the UNOLD 86715 dry; never immerse the UNOLD 86715 in water.
CLICK HERE TO DOWNLOAD UNOLD 86715 (01) PDF DOCUMENT