Free English TRIPLEVISION STM-7000Q (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD TRIPLEVISION STM-7000Q (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the important safety precautions for the TRIPLEVISION STM-7000Q system?
Please adhere to the following safety precautions when installing and using the TRIPLEVISION STM-7000Q system:
• It is important to read the manual before installing.
• Be aware that objects viewed in the monitor are closer than they appear.
• The STM-7000Q is not intended to replace any of your vehicle’s mirrors or other safety devices.
• This system is not a substitute for proper defensive driving techniques.
• Please obey all traffic laws and motor vehicle safety regulations.
• Do not open the monitor or camera housing, as there are no parts that can be serviced. Opening the housings will void your warranty.
• The red power wire must be connected to an accessory that is turned off when the key is removed from the vehicle to prevent power draw.
What are the main features of the TRIPLEVISION STM-7000Q monitor?
The Digital STM-7000Q Touch Monitor is designed for the commercial trucking industry and is built to withstand shock and vibration. Its features include:
• Support for up to 4 camera inputs (with A/V input).
• A red icon blinks on the screen when the vehicle’s gear is switched to Reverse Mode.
• Support for Split Screen, Triple, and Quad display modes.
• An adjustable on-screen distance marker.
• A dimmer feature for night viewing.
• Support for both Normal and Mirror mode for camera views.
• An auxiliary A/V input and output.
• A trigger function for automatic camera switching.
• A wide operating voltage range of 10-32V DC.
How do I use the monitor controls on the TRIPLEVISION STM-7000Q?
The monitor controls for the TRIPLEVISION STM-7000Q function as follows:
1) POWER: Any key can turn the power ON. The Power button is used to turn the power OFF (the indicator lamp changes from Red to Blue).
2) MENU (M): Pressing the Menu button enters the On-Screen Display (OSD) menu.
3) QUAD DISPLAY (Q): Touch the QUAD button to cycle through the display modes in this order: QUAD -> 3PIP (CA1 LARGE, CA3/4/5 SMALL) -> 2PIP (CA1 LARGE, CA3/2 SMALL) -> 3 SPLIT (CA1/CA2/CA3) -> 2 SPLIT (CA3/CA2) -> 2 SPLIT (CA4/CA1) -> QUAD.
4) CAMERA SELECT (C): Touch the camera button to cycle through the camera views. Continuous touches will show CA1 -> CA2 -> CA3 -> CA4.
5) AV SELECT (AV): Connect an A/V input to the second camera or an external device with an RCA type output.
6) VOLUME CONTROL: Use the arrow buttons to adjust volume down or volume up.
7) DIMMER: The monitor features an automatic dimmer control through a CDS sensor.
How do I navigate the OSD menu on the TRIPLEVISION STM-7000Q?
To navigate the On-Screen Display (OSD) menu, use the following controls:
• Select the ‘M’ (Menu) button to enter or exit the monitor menu.
• To move from one main menu to another, use the ‘C’ (Camera Select) button for the Previous Menu and the ‘AV’ button for the Following Menu.
• To select a sub-menu item, use the arrow buttons.
• To move up and down within a sub-menu, use the ‘C’ button for Up and the ‘AV’ button for Down.
• To change a setting, use the left or right arrow buttons.
What settings are available in the monitor menu of the TRIPLEVISION STM-7000Q?
The following tables detail the settings available within the On-Screen Display (OSD) menu of the TRIPLEVISION STM-7000Q.
| FUNCTION | DESCRIPTION |
| LANGUAGE | ENGLISH |
| SYSTEM | NTSC/PAL |
| DIRECTION | 0° / 180° |
| DIMMER | 1(2,3,4,5,OFF) |
| AUTO POWER | ON |
| LOGO SET | ON, (2~20Sec) |
| AV OUTPUT | LIVE/QUAD |
| SHUTTER | ON |
| RESET | FACTORY DEFAULT |
| PICTURE | DESCRIPTION |
| CONTRAST | 15 |
| BRIGHTNESS | 15 |
| COLOR | 15 |
| TINT | 15 |
| NOR/MIR | DESCRIPTION |
| CAM1 | NORMAL / MIRROR |
| CAM2 | NORMAL / MIRROR |
| CAM3 | NORMAL / MIRROR |
| CAM4 | NORMAL / MIRROR |
| ALL | NORMAL / MIRROR |
| UP/DOWN | DESCRIPTION |
| CAM1 | UP/DOWN |
| CAM2 | UP/DOWN |
| CAM3 | UP/DOWN |
| CAM4 | UP/DOWN |
| ALL | UP/DOWN |
| TRIGGER | DESCRIPTION |
| REAR SCALE | ON / OFF |
| BLINK MARK | ON / OFF |
| TRIG 1 | CAM1 |
| TRIG 2 | CAM3/CAM2 |
| TRIG 3 | 2 PIP |
| TRIG 4 | 3 PIP |
| HAZARD | QUAD |
| CAMERA NAME | DESCRIPTION |
| CAM1 | REAR |
| CAM2 | RIGHT |
| CAM3 | LEFT |
| CAM4 | FRONT |
| CAM MODES | DESCRIPTION |
| QUAD | ON / OFF |
| 3 PIP | ON / OFF |
| 2 PIP | ON / OFF |
| 3 SPLIT | ON / OFF |
| CAM3/2 SPLIT | ON / OFF |
| CAM4/1 SPLIT | ON / OFF |
| SCAN | DESCRIPTION |
| AUTO SCAN | ON |
| SCAN KEY | ONE / FULL (SEQUENCE) |
| CAM1 | 3 |
| CAM2 | 3 |
| CAM3 | 3 |
| CAM4 | 3 |
The REAR SCALE ADJ function allows you to adjust the stop and rear guide lines.
What are the available screen display modes on the TRIPLEVISION STM-7000Q?
The TRIPLEVISION STM-7000Q offers several screen display modes, which can be selected manually or activated by triggers:
Manual Display Modes:
• QUAD DISPLAY: Shows four camera inputs (CA4, CA1, CA3, CA2) in a 2×2 grid.
• 3 PIP DISPLAY: Shows one large view (CA1) with three smaller views (CA3, CA4, CA2) along the side.
• 2 PIP DISPLAY: Shows one large view (CA1) with two smaller views (CA3, CA2) along the side.
• 3 SPLIT DISPLAY: Shows three camera views in vertical splits (CA1, CA3, CA2).
• 2 SPLIT DISPLAY (CA3/CA2): Shows two camera views in a horizontal split.
• 2 SPLIT DISPLAY (CA4/CA1): Shows two camera views in a horizontal split.
Trigger-Activated Display Modes:
• TRIGGER 3 PIP DISPLAY: Shows one large view (CA1) with three smaller views (CA3, CA4, CA2).
• TRIGGER 2 PIP DISPLAY: Shows one large view (CA1) with two smaller views (CA3, CA2).
• TRIGGER 3 SPLIT DISPLAY: Shows one large view (CA1) with two smaller views (CA3, CA2) on the side.
• TRIGGER 2 SPLIT DISPLAY: Shows two views in a horizontal split, where one view (CA3) can be overridden by its trigger (CA4) and the other (CA2) can be overridden by its trigger (CA1).
• TRIGGER QUAD DISPLAY: Shows four camera inputs (CA4, CA1, CA3, CA2) in a 2×2 grid.
• TRIGGER SINGLE DISPLAY: Shows a full-screen view of a single triggered camera (e.g., CA1, CA2, CA3, or CA4).
How do I wire the TRIPLEVISION STM-7000Q monitor?
Follow these instructions to properly wire your TRIPLEVISION STM-7000Q monitor. Before making any connections, disconnect the ground terminal of the vehicle’s battery to avoid short circuiting.
• Red Wire: Connect to a positive power terminal (DC 10V – 32V) that is energized when the ignition key is in the accessory position.
• Black Wire: Connect to a metal surface on the vehicle for ground, or to the negative battery terminal.
• Green Wire: Connect to the switched positive power output terminal of the ‘R’ (Reverse) gear. This is for Trigger 1 (CAM1).
• White Wire: Connect to the switched positive power output terminal for CAM2. This is for Trigger 2.
• Blue Wire: Connect to the switched positive power output terminal for CAM3. This is for Trigger 3.
Ensure that all plugs are fully inserted into their connectors or jacks, as a loose connection may cause a malfunction.
Wire Color Description:
| Cable Color | Description |
| Red | Positive Power (DC 10V ~ 32V) |
| Black | Ground |
| Green | ‘R’ Gear Power (DC 10V ~ 32V) |
| White | Trigger Power (DC 10V ~ 32V) |
| Blue | Trigger Power (DC 10V ~ 32V) |
What is the pinout for the waterproof camera cable of the TRIPLEVISION STM-7000Q?
The 5-pin waterproof camera cable has the following pinout:
| Pin No. | Description |
| 1 | Video |
| 2 | Audio |
| 3 | DC 12V Power |
| 4 | Ground |
| 5 | Heater B+ (NC) |
How do I install the TRIPLEVISION STM-7000Q monitor?
To install the monitor, follow these steps:
1. Before installing, clean the monitor with alcohol.
2. Slide the fix knob into the slide lane of the monitor.
3. Adjust the angle and direction for proper viewing on the monitor mount.
4. Connect the wires according to the wiring instructions.
What are the operating instructions for the TRIPLEVISION STM-7000Q?
When you turn the ignition key to the Accessory or ON position, power will be supplied to the monitor, and it will enter display mode.
If the monitor is turned off, and you set the gear lever to the Reverse position, the monitor will automatically turn on and display the picture from the CA1 camera input.
How should I clean and maintain my TRIPLEVISION STM-7000Q system?
For cleaning and general maintenance, please follow these guidelines:
• If the inside of the vehicle is very hot from direct sunlight, allow it to cool off before use.
• Clean the unit with a slightly damp, soft cloth. You may use a mild household detergent.
• Never use strong solvents such as thinner or benzine, as they might damage the unit.
• Do not attempt to service this system yourself. Refer all servicing to qualified service personnel.
What are the specifications of the TRIPLEVISION STM-7000Q monitor?
| TV System | NTSC / PAL (AUTO) |
| LCD Panel | 7″ Digital LED BACK LIGHT Monitor With OSD Function |
| Field of View | Top: 40°, Bottom: 60°, Left: 60°, Right: 60° |
| Resolution | 800 X 3 (RGB) X 480 |
| Power | DC 10V~32V, 14W |
| Dimensions | 188(W) X 136.9(H) X 30 (D) mm 7.4(W) X 5.4(H) X 1.2 (D) Inch |
| Weight | 460g (1 lbs) |
| Contrast Rating | 500:1 |
What are the features and specifications of the CC-45 camera for the TRIPLEVISION STM-7000Q system?
The CC-45 is a waterproof aluminum die-casted 1/3″ color IR LED rearview CCD camera.
Features:
• High Performance New DSP Color CCD Camera
• Sharp & Wide Angle View
• Certified IP Rating: IEC 529, IP 69K
• Harsh Environment Tested
• Built-in Low Light 4 IR LEDs
• 0°C Auto Heating Circuit (Optional)
• G-Force Rating: 30G
Specifications:
| Image Sensor | 1/3″ SONY SUPER HAD COLOR CCD |
| Effective Pixels | NTSC: 410K, PAL: 470K |
| Synchronization System | Internal |
| Scanning System | 640 TV Lines |
| S/N Ratio | More Than 48 dB |
| Min. Illumination | 0 Lux |
| Video Out | 75 ohm 1Vp-p Composite Signal |
| BLC | Auto |
| IRIS | Electronic Auto IRIS |
| Lens (Default) | f=2.0/f=3.0mm Fixed |
| Operating Voltage Range | 9V ~ 15V |
| Operating Temperature | -30°C ~ 85°C |
| Weight | 0.18Kg |
| Dimension | 45(W) X 61(D) X 41(H) |
What is the pin map for the CC-45 camera cable?
| Pin No. | Description |
| 1 | Video Output |
| 2 | N.C |
| 3 | N.C |
| 4 | DC 12V Power |
| 5 | Ground |
What are the features and specifications of the CC-82 camera for the TRIPLEVISION STM-7000Q system?
The CC-82 is a waterproof aluminum die-casted 1/3″ color IR LED rearview CCD camera.
Features:
• High Performance New DSP Color CCD Camera
• Sharp & Wide Angle View
• Certified IP Rating: IEC 529, IP 67K
• Harsh Environment Tested
• 0°C Auto Heating Circuit (Optional)
• G-Force Rating: 10G
Specifications:
| Image Sensor | 1/3″ SONY SUPER HAD COLOR CCD |
| Effective Pixels | NTSC: 410K, PAL: 470K |
| Synchronization System | Internal |
| Scanning System | 640 TV Lines |
| S/N Ratio | More Than 48 dB |
| Min. Illumination | 0.1 Lux |
| Video Out | 75 ohm 1Vp-p Composite Signal |
| BLC | Auto |
| IRIS | Electronic Auto IRIS |
| Lens (Default) | F=2.0/f=3.0mm Fixed |
| Operating Voltage Range | 9V ~ 15V |
| Operating Temperature | -30°C ~ 85°C |
| Weight | 0.42Kg |
| Dimension | 93(W) X 57.5(D) X 56(H) |
What is the pin map for the CC-82 camera cable?
The 4-pin DIN plug for the CC-82 camera has the following pinout:
| Pin No. | Description |
| 1 | Video Output (White) |
| 2 | Audio Output (Red) |
| 3 | DC 12V Power (Yellow) |
| 4 | Ground (Black) |
| 5 | Heater (Blue – Option) |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD TRIPLEVISION STM-7000Q (01) PDF DOCUMENT
what does “trigger” mean.