Free English TRENDNET TPE-TG80G (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD TRENDNET TPE-TG80G (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I perform the hardware installation for the TRENDNET TPE-TG80G?
To set up the TRENDNET TPE-TG80G, follow these hardware connection steps as illustrated in the guide:
1. Connect the power adapter to the power port on the back of the TRENDNET TPE-TG80G and plug the other end into a standard electrical wall outlet.
2. Use an Ethernet cable to connect your Router to any of the available ports on the TRENDNET TPE-TG80G.
3. Connect your network devices to the switch ports. The TRENDNET TPE-TG80G supports various device types across its 8 ports, including:
PoE devices such as IP cameras (802.3af PoE).
PoE+ devices such as dome cameras (802.3at PoE+).
Non-PoE devices such as desktop computers or servers.
4. Ensure the router is connected to the Internet to provide connectivity to all devices linked through the TRENDNET TPE-TG80G.
What technical standards does the TRENDNET TPE-TG80G comply with?
The TRENDNET TPE-TG80G, an 8-Port GREENnet Gigabit PoE / PoE+ Switch, is confirmed to comply with the following technical standards:
| Standard Category | Standard Reference |
| Information Technology Equipment | EN 55022 : 2006 + A1 : 2007 Class B |
| Electromagnetic Compatibility (EMC) Limits | EN 61000-3-2 : 2006 + A1 : 2009 + A2 : 2009 Class A |
| Voltage Fluctuations and Flicker | EN 61000-3-3 : 2008 |
| Immunity Characteristics | EN 55024 : 1998 + A1 : 2001 + A2 : 2003 |
What are the FCC compliance conditions for the TRENDNET TPE-TG80G?
The TRENDNET TPE-TG80G complies with Part 15 of the FCC Rules. Its operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Are there warnings regarding modifications to the TRENDNET TPE-TG80G?
Yes. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to the TRENDNET TPE-TG80G. Such unauthorized modifications could void the user’s authority to operate the equipment.
Additionally, users should only use the power adapter specified for the device. Using a different adapter than the one mentioned can produce physical damage or damage the connected equipment. The adapter must operate with the voltage and frequency of the domestic electrical energy existing in the country or zone of installation.
How should I dispose of the TRENDNET TPE-TG80G at the end of its life?
Waste electrical and electronic products, such as the TRENDNET TPE-TG80G, must not be disposed of with household waste. You are encouraged to recycle where facilities exist. You should check with your Local Authority or Retailer for specific recycling advice in your area.
CLICK HERE TO DOWNLOAD TRENDNET TPE-TG80G (01) PDF DOCUMENT