FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF USER GUIDE
FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF USER MANUAL
FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF OWNER GUIDE
FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF OWNER MANUAL
FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF REFERENCE GUIDE
FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF INSTRUCTION GUIDE
FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF REFERENCE MANUAL
FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF INSTRUCTION MANUAL
FREE ENGLISH TOSHIBA E-STUDIO4525AC (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD TOSHIBA E-STUDIO4525AC (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I stop and restart copying?
To stop copying, press [Stop] on the touch panel.
To restart copying, press [Next Copy] on the touch panel or the [START] button on the control panel.
How do I scan the next original during copying with auto job start?
Set the number of copy sets and the copy modes as required.
Press the [START] button on the control panel.
How do I scan the next original during copying with a priority job?
Press [Interrupt Priority] and select [Priority].
Set the number of copy sets and the copy settings as required.
Press the [START] button.
How do I make other copies while interrupting a copy job?
Press [Interrupt Priority] and select [Interrupt].
Select other copy modes as required.
Press the [START] button.
How do I make one copy as a sample (proof copy)?
Select the number of copy sets and copy modes.
Press [Proof Copy] on the touch panel.
Press the [START] button on the control panel.
Change the number of copy sets and copy modes as required after checking the proof copy.
Press the [START] button on the control panel.
How do I specify the orientation of originals?
Press a paper direction button on the Basic menu, matching the orientation of the placed original.
When the placed original faces to the front (with its bottom toward you), press [A A]. When the original faces to the side (with its bottom to the right), press [A A].
How do I copy mixed-size originals in one operation?
Press [Zoom] on the Basic menu.
Press [Mixed Size].
Select a paper size.
How do I perform bypass copying?
When you make copies on OHP film, sticker labels, envelopes, or non-standard size paper, place the copy paper on the bypass tray. Bypass copying is also recommended for copying on standard size paper which is not set in any of the drawers.
How do I make a copy on A3, A4, B4 and B5 size paper (in equipment other than for North America) / LD, LT, LG and ST-R size paper (in equipment for North America)?
Place paper on the bypass tray.
Select the same size button under “Copy” as that of the paper you placed on the bypass tray.
Press [Paper Type] on the touch panel if the paper type of the paper you placed on the bypass tray is other than plain paper.
How do I make a copy on other than the above standard sizes of paper?
Place the original(s) and paper on the bypass tray.
Press [Size Setting] on the touch panel.
Press the button of the same size as the paper you placed on the bypass tray.
Press [Other] under “Copy”.
Press [Paper Type] if the paper you placed on the bypass tray is other than plain paper.
How do I make a copy on an envelope?
Place the original on the original glass.
Place paper on the bypass tray.
Press [Size Setting] on the touch panel.
Press the button of the same size as the envelope you placed on the bypass tray.
Press [Other] under “Copy” and press [OK].
How do I select the exit tray?
The exit tray currently selected is displayed on the equipment status indication area. To change the exit tray, press [Exit Tray]. Every time you press this, the display changes from the exit tray of the equipment, each exit tray of the finisher and Job Separator, and automatic selection in this order.
How do I switch color modes?
Press any of [Full Color], [Black] or [Auto Color] on the touch panel.
How do I adjusting density automatically?
Press [Auto] on the touch panel.
How do I adjust density manually?
Press either or ▸ to select the desired density level.
How do I use Automatic Magnification Selection (AMS)?
Press [Zoom] on the Basic menu.
Select the desired paper size, press [AMS] and then [OK].
Place the original(s).
How do I specify both the original size and the copy paper size separately?
Press [Zoom] on the Basic menu.
Select the desired sizes for the original and copy paper, and then press [OK].
How do I register paper sizes to “Other” size?
Press [Size Setting] on the touch panel.
Select the desired size.
How do I register non-standard size in the memory?
Follow the same procedure noted in steps 1 to 3 in the reference below:
Register dimensions.
How do I specify reproduction ratio manually?
Press [Zoom] on the Basic menu.
Press the buttons below to select the desired reproduction ratio.
Select the desired size, and then press [OK].
How do I copy photo originals in the optimal reproduction ratio for copy paper size (Photo Zoom) (Color Model only)?
Press [Zoom] on the Basic menu.
Press [Photo Zoom].
Select the original size.
Select the desired copy paper size, and then press [OK].
How do I set photo originals in other sizes?
Press [Custom] on the touch panel.
Key in the size of the original, and press [OK].
How do I reduce images to scan the entire original, including the edges (Full Image) (Color Model only)?
Press [Zoom] on the Basic menu.
Select sizes for the original and copy paper, and press [OK].
Press [Full Image] on the Edit menu.
How do I make a copy with a scanned image reduced and moved to the center of the paper (Centering Copy)?
Press [Zoom] on the Basic menu.
Select a desired reproduction ratio.
Press [Centering Copy].
Press [OK] on the displayed centering copy screen.
Press [OK] on the [Zoom] screen.
How do I select the finishing mode?
Press [Finishing] on the Basic menu.
Select [Sort] or [Group], and then press [OK].
Key in the desired number of copies on the Basic menu.
How do I use Rotate sort mode?
Press [Finishing] on the Basic menu.
Select [Rotate Sort], and then press [OK].
Key in the desired number of copies on the Basic menu.
How do I use Staple sort mode?
Press [Finishing] on the Basic menu.
Press the button for the staple position, select the direction that matches the original you set from “Original Direction”, and press [OK].
How do I select a binding mode and press [OK]?
When you select [Magazine Sort], [Magazine Sort & Center Fold], or [Magazine Sort & Saddle Stitch], specify the binding margin and press [OK].
Combine the copied paper if the center fold mode or magazine sort & center fold mode is used.
How do I select [Hole Punch] and [Original Direction], and then press [OK]?
Press [Finishing] on the Basic menu.
How do I make a 1-sided copy?
Press [2-Sided] on the Basic menu.
Select the desired mode and original direction, and then press [OK].
How do I make a 2-sided copy?
Press [2-Sided] on the Basic menu.
Select the desired mode, book or tablet of original and paper, and original direction, and then press [OK].
How do I make a 2-sided copy from a book-type original?
Press [2-Sided] on the Basic menu.
Select [Book -> 2].
Select the start page to be scanned and page layout.
Press [OK].
Press the drawer button corresponding to the desired paper size.
Select other copy modes as required.
Place the original on the original glass.
Press the [START] button on the control panel. Once the pages are scanned, set the next ones on the original glass.
When all the pages have been scanned, press [Finished].
How do I display the Edit Menu?
You can display the Edit menu by pressing the [Edit] tab on the touch panel when you want to use various editing functions.
How do I create top, bottom, left, and right margins?
Press [Image Shift] on the Edit menu.
Select the type of binding margin.
Adjust the width of the binding margin, and press [OK].
Press [OK].
How do I creating bookbinding margins?
Press [Image Shift] on the Edit menu.
Press [Book].
Adjust the width of the binding margin, and press [OK].
Press [OK].
How do I clear dirty edges of originals (Edge Erase)?
Press [Edge Erase] on the Edit menu.
Adjust the width of the part to be erased, and press [OK].
How do I clear shadows in the center of book-type originals (Book Center Erase)?
Select the drawer for the desired paper size.
Press [Book Center Erase] on the Edit menu.
Adjust the width of the part to be erased, and press [OK].
How do I copy the sides of book-type originals separately (Dual Page)?
Press [Dual Page] on the Edit menu.
Press [1 Side] or [2 Side].
Select other copy modes as required.
Press the [Basic] tab to display the Basic menu, and then select A4, B5 or LT as the copy paper size.
Open the desired page of the original and place it on the original glass.
How do I copy multiple originals onto one sheet (2 in 1 / 4 in 1)?
Press [2 in 1 / 4 in 1] on the Edit menu.
Perform 2 in 1 / 4 in 1 setting, and press [OK].
How do I use Centering a Scanned Image (Centering Copy)?
Press [Centering Copy] on the Edit menu.
Press [OK].
How do I select editing scanned images?
Press [Editing] on the Edit menu.
Select [Trim] or [Mask].
Place the original on the original glass with its face up.
How do I mirror image and negative/positive reversal?
Press [Editing] on the Edit menu.
Select [Mirror] or [Neg/Pos], and then press [OK].
How do I use Applying Separate Reproduction Ratios to Vertical and Horizontal Directions (XY Zoom)?
Press [XY Zoom] on the Edit menu.
Set the reproduction ratio in both vertical and horizontal directions.
How do I use Applying Different Settings for Cover Sheets (Cover Sheet)?
Place the paper for the cover sheets and specify the paper type.
Place the normal paper in the drawer(s).
Place the original(s).
Press [Cover Sheet] on the Edit menu.
Select the front and back cover settings, and then press [OK].
How do I use Inserting a Sheet at a Desired Page (Sheet Insertion)?
Place sheets for sheet insertion and specify the paper type.
Press [Sheet Insertion] on the Edit menu.
Select either [Copied] or [Blank].
Select the page where the insertion sheets will be inserted, and press [OK].
How do I use adding annotation?
Press [Annotation] > [Time Stamp] on the Edit menu.
Select the direction and position of the time stamp as well as the color of the background, and then press [OK].
How do I add text stamp (Text Stamp)?
Press [Annotation] > [Text Stamp] on the Edit menu.
Select preset text or enter a certain text up to 32 letters. Select the direction and position of the text stamp as well as the color of the text and background, and then press [OK].
How do I add page number (Page Number)?
Press [Annotation] > [Page Number] on the Edit menu.
Select the indication style of the page number. Select the output direction and position of the page number, specify the start and end page numbers as well as the color of the background, and then press [OK].
How do I add copy number (Copy Number)?
Press [Annotation] > [Copy Number] on the Edit menu.
Select the indication style of the copy number. Select the output direction and position of the number of sets as well as the color of the background, and then press [OK].
How do I add multiple annotations (Multiple Annotation)?
Press [Annotation] > [Multiple Annotation] on the Edit menu.
Select the items to be added.
Select the output position and direction of the text, specify the start and end page number, and then press [OK].
How do I apply multiple settings (Job Build)?
Press [Job Build] on the Edit menu.
Press [OK].
Place the first stack of originals, and then select settings.
Press the [START] button on the control panel.
Place the next stack of originals, and then select the settings.
When the scanning of all the originals is finished, change the number of copy sets as required.
Then press [Job Finish] on the touch panel.
How do I use clearing dirty edges of originals (Edge Erase)?
You can whiten the edge of the copied image when a shadow-like dark part appears on it. This function is called “edge erase”. It is useful when you want to make the copied image neat and clear if the edge of the original is dirty or torn.
How do I press [Outside Erase] on the Edit menu?
Select the drawer for the desired paper size.
Press [Outside Erase] on the Edit menu.
Set “outside erase”, and press [OK].
How do I switch feeding modes (ADF -> SADF)?
Press [ADF -> SADF] on the Edit menu.
Press [OK].
How do I access applying separate reproduction ratios to vertical and horizontal directions (XY Zoom)?
Press [XY Zoom] on the Edit menu.
Set the reproduction ratio in both vertical and horizontal directions.
How do I use Copying and Saving as a File?
Press [Storage] on the touch panel.
Press [Copy & File] on the touch panel.
Enter file information and press [OK].
How do I set a share folder?
When a user who has the privilege of setting a share folder has pressed [Remote 1] or [Remote 2], the menu for specifying a directory appears.