FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF DOCUMENT.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF USER GUIDE.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF USER MANUAL.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF OWNER GUIDE.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF OWNER MANUAL.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF REFERENCE GUIDE.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF REFERENCE MANUAL.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH AUTEL MAXIIM IM508S (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD AUTEL MAXIIM IM508S (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the main components of the AUTEL MAXIIM IM508S tablet?
1. 7.0″ LCD Capacitive Touchscreen
2. Ambient Light Sensor: Detects ambient brightness.
3. Power LED: Indicates battery level & charging or system status.
4. Vehicle Communication LED: Flashes green when the tablet is communicating/linking with the vehicle’s system.
5. Collapsible Stand: Extends from the back to allow hands-free viewing of the tablet.
6. Heat Sink
7. Built-in Battery
8. Mini USB Port
9. Micro SD Card Slot: Holds the micro SD card.
10. DB15-Pin Port: Connects the main cable.
11. USB Port
12. Lock/Power Button: Turns the device on & off with a long press, or locks the screen with a short press.
What are the main components of the AUTEL MAXIIM IM508S XP200 programmer?
13. Vehicle Key Chip Slot: Holds the vehicle key chip.
14. Vehicle Key Slot: Holds the vehicle key.
15. Status LED Light: Indicates the current operating status.
16. DB15-Pin Port: Connects EEPROM Adapter and EEPROM Clamp Integrated MC9S12 Cable.
17. Mini USB Port: Provides data communication and power supply.
What do the Power LED indicators on the AUTEL MAXIIM IM508S mean?
Green: Flashes green when charging.
Red: Flashes red when an error has occurred.
What do the Status LED indicators on the AUTEL MAXIIM IM508S XP200 programmer mean?
Red:
• Lights red when the firmware is upgrading or an error has occurred.
• Lights red briefly when the device is powered on and performing self-check.
Green:
• Flashes green when communicating via USB cable.
• Lights green when the device is ready for use.
What important safety information should I know before using the AUTEL MAXIIM IM508S?
Before operating or maintaining this unit, please read the instructions carefully, paying extra attention to the safety warnings and precautions. Failure to use this product properly may cause damage and/or personal injury and will void the product warranty.
How do I get started and set up the AUTEL MAXIIM IM508S for use?
1. Create an Autel ID and register the product with its serial number and password.
2. Ensure your tool is sufficiently charged or connected to the power source. Press and hold the Lock/Power button to turn on the key programming tool.
3. Connect the female adapter of the main cable to the key programming tool and tighten the captive screws.
4. Connect the 16-pin male adapter of the main cable to the vehicle’s DLC, which is generally located under the vehicle dashboard.
5. Your key programming tool is now ready for use.
How do I perform a software update on the AUTEL MAXIIM IM508S?
Ensure the key programming tool is connected to the Internet and tap Update on the Home screen to view all available updates.
How do I use the Immobilizer Function on the AUTEL MAXIIM IM508S?
This function requires a connection among the vehicle, the IM508S key programming tool, and the XP200.
1. Connect the vehicle and the key programming tool with the supplied main cable.
2. Connect the key programming tool and the XP200 with the supplied USB cable.
3. Select Immobilizer on the Home screen and follow the on-screen instructions to continue.
What is required to use the Programming Function on the AUTEL MAXIIM IM508S?
This function requires a connection between the MaxiIM IM508S key programming tool and the XP200.
CLICK HERE TO DOWNLOAD AUTEL MAXIIM IM508S (01) PDF DOCUMENT