Free English TJERNLUND P-4 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD TJERNLUND P-4 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I install the speed control for the TJERNLUND P-4?
1. Plug fan cord into receptacle on bottom of SCP.
2. Plug SCP Speed Control into 120 VAC wall socket.
Can the TJERNLUND P-4 speed control be used with a wall switch?
Yes, the SCP may be plugged into a switched outlet to turn fan on/off by a wall switch.
What are the specifications and maximum ratings for the TJERNLUND P-4 speed control?
The specifications for the device are as follows:
Max Rating: 300 Watts
3.0 Amps
125 VAC
60 Hertz
CLICK HERE TO DOWNLOAD TJERNLUND P-4 (01) PDF DOCUMENT