Free English THERMRU HS613 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD THERMRU HS613 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the important instructions for the THERMRU HS613 Heated Seat Cushion?
Non-observance of the following notes may result in personal injury or material damage.
This Heated Seat Cushion is only designed to warm up the human body.
Do not use the Seat Cushion on children or persons who are disabled, asleep or insensitive to heat (persons who cannot react on overheating).
Children shall not play with the appliance.
Do not pull, twist or make sharp bends in the cables.
If the Heated Seat Cushion is being used over several hours, we recommend that you set the lowest temperature setting to avoid overheating the heated body part, which may lead to burns to the skin.
The THERMRU HS613 seat cushion switches off automatically after 100 minutes.
What are the product features of the THERMRU HS613 Mobiles heated seat cushion?
The THERMRU HS613 Mobiles heated seat cushion can be used for indoor and outdoor, it offers deep warmth with far infrared. It has 3 adjustable temperature levels. The special rubber heating element has a large heating surface and even heat distribution. The seat cushion is machine washable.
How do I operate the THERMRU HS613 heated seat cushion with a power bank?
Plug the USB end of the cable into the USB port of the power bank (not included). Turn on the power bank.
Puts the power bank in the battery bag.
Press the power button of the controller short to switch on the controller. Then press the power button briefly to set the desired temperature level (1-2-3, red-green-blue).
The 1st stage is the warmest stage, the red LED indicator lights up.
The 2nd stage is the middle stage, the LED green indicator.
The 3rd stage is the low level, the blue LED indicator lights up.
Press the power button until all of the LED off to switch off the controller.
The heating belt switches off automatically after 90 minutes. If you want to switch the belt on again immediately, please switch your power bank on again.
How do I operate the THERMRU HS613 heated seat cushion using mains power?
Connect the extension cable to the connection cable of the seat cushion.
Insert the USB plug of the extension cable into the USB charger.
Press the power button of the controller short to switch on the controller. Then press the power button briefly to set the desired temperature level (1-2-3, red-green-blue).
Press the power button until all of the LED off to switch off the controller.
After use, remove the extension cord from the charger.
The heating belt switches off automatically after 90 minutes. If you want to switch the belt on again immediately, please switch your power bank on again.
Please use only the supplied charger.
How do I clean and maintain the THERMRU HS613 heated seat cushion?
Before cleaning, take the heating pad and the cable out of the seat cushion.
Never use aggressive cleaning agents or strong brushes.
The seat cushion can be washed in the washing machine up to 45 ° C in a washing bag or supplied washing bag.
The seat cushion must not be dried or ironed in a dryer.
What is the proper method for disposal of the THERMRU HS613 heated seat cushion?
This product must not be disposed together with the domestic waste. All users are obliged to hand in all electrical or electronic devices, regardless of whether or not they contain toxic substances, at a municipal or commercial collection point so that they can be disposed of in an environmentally acceptable manner. Consult your municipal authority or your dealer for information about disposal.
CLICK HERE TO DOWNLOAD THERMRU HS613 (01) PDF DOCUMENT