Free English THERMALTAKE VERSA H26 T6 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD THERMALTAKE VERSA H26 T6 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the full specifications for the THERMALTAKE VERSA H26 T6 case?
The THERMALTAKE VERSA H26 T6 has the following specifications:
| Specification Item | Detail |
|---|---|
| Model | Versa H26 TG |
| Case Type | Middle tower |
| Dimension (H*W*D) | 464 x 220 x 493 mm (18.3 x 8.7 x 19.4 inch) |
| Side Panel | 4mm Tempered Glass x 1 |
| Material | SPCC |
| Rear Exhaust Fan | 120 x 120 x 25 mm fan (1000rpm, 16dBA) |
| Drive Bays (Accessible) | 2 x 5.25″ |
| Drive Bays (Hidden) | 2 x 2.5″ or 3.5″; 3 x 2.5″ |
| Expansion Slots | 7 |
| Supported Motherboards | 6.7″ x 6.7″ (Mini ITX), 9.6″ x 9.6″ (Micro ATX), 12″ x 9.6″ (ATX) |
| CPU Cooler Height Limitation | 160mm |
| VGA Length Limitation | 310mm |
| PSU Length Limitation | 220mm |
Fan Support includes: Front: 3 x 120mm; Top: 3 x 120mm, 2 x 140mm; Rear: 1 x 120mm.
Radiator Support includes: Front: 1 x 360mm; Top: 1 x 360mm, 1 x 280mm; Rear: 1 x 120mm.
What parts are included in the accessory kit for the THERMALTAKE VERSA H26 T6 case?
The accessory kit for the THERMALTAKE VERSA H26 T6 includes the following items:
| Parts Name | Quantity | Used for |
|---|---|---|
| Stand-off #6-32 x 6mm | 3 | Motherboard |
| Screw #6-32 x 6mm | 6 | PSU |
| Screw #6-32 x 5mm | 10 | HDD |
| Screw M3 x 5mm | 30 | 2.5″ HDD / Motherboard / ODD |
| CableTie | 10 | Cable Management |
| Buzzer | 1 | Motherboard Alarm |
What is the maximum CPU cooler height limitation for the THERMALTAKE VERSA H26 T6?
The height limit for the CPU heatsink in the THERMALTAKE VERSA H26 T6 is 160 mm (6.3 inches).
What is the maximum VGA (graphics card) length limitation for the THERMALTAKE VERSA H26 T6?
The length limit for the VGA (graphics card) in the THERMALTAKE VERSA H26 T6 is 310 mm (12.2 inches).
How do I perform a side panel disassembly on the THERMALTAKE VERSA H26 T6 chassis?
To disassemble the side panel on the THERMALTAKE VERSA H26 T6:
Step 1. Remove the screws on the back of the chassis.
Step 2. Open the side panel.
What are the steps for PSU Installation in the THERMALTAKE VERSA H26 T6?
The procedure for PSU installation in the THERMALTAKE VERSA H26 T6 is as follows:
Step 1. Place the power supply in proper location.
Step 2. Secure it with screws.
What is the procedure for Motherboard Installation in the THERMALTAKE VERSA H26 T6?
To install the motherboard in the THERMALTAKE VERSA H26 T6:
Step 1. Lay down the chassis.
Step 2. Install the motherboard in proper location and secure it with screws.
How should a 3.5 inch or 2.5 inch HDD be installed in the THERMALTAKE VERSA H26 T6 using the HDD Tray?
When using the HDD Tray for 3.5 inch or 2.5 inch HDD installation in the THERMALTAKE VERSA H26 T6, follow these steps based on the diagrams provided:
Step 1. Prepare the mounting configuration.
Step 2. Place the HDD into the appropriate mount.
Step 3. Secure the HDD assembly into the chassis.
How do I install an HDD in the THERMALTAKE VERSA H26 T6 without using the HDD Tray?
To install an HDD in the THERMALTAKE VERSA H26 T6 without the HDD Tray:
Insert the HDD and tighten it with the screws directly into the mounting point.
What are the steps for installing a 5.25 inch device in the THERMALTAKE VERSA H26 T6?
Follow these steps to install a 5.25 inch device in the THERMALTAKE VERSA H26 T6:
Step 1. Remove the 5.25″ drive bay cover.
Step 2. Slide the 5.25″ device into the drive bay to lock the device.
Note: To unlock the device, press the 5.25″ tool-free mechanism.
How is PCI Slot Usage managed on the THERMALTAKE VERSA H26 T6?
To use the PCI slots on the THERMALTAKE VERSA H26 T6:
Step 1. Loosen the screws using a screwdriver.
Step 2. Install the PCI card in the proper location and secure it with screws.
What radiator configurations are supported by the THERMALTAKE VERSA H26 T6 case?
The THERMALTAKE VERSA H26 T6 supports the following radiator installations:
Front: 1 x 360mm radiator.
Top: 1 x 360mm radiator or 1 x 280mm radiator.
Rear: 1 x 120mm radiator.
What are the supported fan sizes and locations for Air Cooling Installation in the THERMALTAKE VERSA H26 T6?
The air cooling installation options for the THERMALTAKE VERSA H26 T6 are:
Front: Supports 3 x 120mm fans.
Top: Supports 3 x 120mm fans or 2 x 140mm fans.
Rear: Supports 1 x 120mm fan.
How do I connect the Case LED Connection leads on the THERMALTAKE VERSA H26 T6 to the motherboard?
To connect the Case LED Connection leads on the THERMALTAKE VERSA H26 T6:
1. Locate the LEDs and switch leads on the front of the case.
2. Consult your motherboard user manual.
3. Connect these leads to the corresponding panel header on the motherboard.
What steps are required to establish the USB 3.0 connection for the THERMALTAKE VERSA H26 T6?
For USB 3.0 connection on the THERMALTAKE VERSA H26 T6:
Step 1. Make sure your motherboard supports USB 3.0 connection.
Step 2. Connect the USB 3.0 cable to the available USB 3.0 port on your computer.
What should I verify when connecting the Audio leads for the THERMALTAKE VERSA H26 T6?
When connecting the Audio leads for the THERMALTAKE VERSA H26 T6, you must:
1. Refer to the provided illustration of the Audio connector and your motherboard user manual.
2. Select a motherboard that uses AC’97 or HD Audio (Azalia).
3. Be aware of which standard your audio supports, as connecting incorrectly may damage your device(s).
What are the wire mappings for the AUDIO HD AUDIO Function header on the THERMALTAKE VERSA H26 T6?
The AUDIO HD AUDIO Function header connections are mapped as follows:
| Case Wire | Color | Header Pin Label |
|---|---|---|
| PORT1 L | BROWN | AUD |
| PORT1 R | RED | GND |
| PORT2 R | YELLOW | SENSE1_RETURN |
| SENSE_SEND | PURPLE | SENSE2_RETURN |
| PORT2 L | BLUE | KEY |
Other noted pins include BLACK connected to PRESENCE# and KEY connected to BLACK based on the diagram representation.
What are the wire mappings for the USB 3.0 Function header when connecting the THERMALTAKE VERSA H26 T6 cable?
The USB 3.0 Function connection mappings for the THERMALTAKE VERSA H26 T6 are as follows:
VCC1 connects to RED2, which corresponds to VCC2 on the header.
D1- connects to WHITE2, which corresponds to WHITE1 on the header (related to D2-).
D1+ connects to GREEN2, which corresponds to GREEN1 on the header (related to D2+).
GND connects to BLACK2, which corresponds to BLACK1 on the header.
NC connects to N.C, and KEY connects to KEY on the header.
How can I install expansion cards using the PCI Slot Usage guide on the THERMALTAKE VERSA H26 T6?
To use the PCI slots on the THERMALTAKE VERSA H26 T6:
Step 1. Loosen the screws using a screwdriver.
Step 2. Install the PCI card in the proper location and secure it with screws.
CLICK HERE TO DOWNLOAD THERMALTAKE VERSA H26 T6 (01) PDF DOCUMENT