FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF DOCUMENT.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF USER GUIDE.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF USER MANUAL.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF OWNER GUIDE.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF OWNER MANUAL.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF REFERENCE GUIDE.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF REFERENCE MANUAL.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH THERMALTAKE GM5 3DOF (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD THERMALTAKE GM5 3DOF (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I redeem the SimTools code for the THERMALTAKE GM5 3DOF?
Follow the instructions to enter the 8-digit redemption code and complete the process. Upon successful redemption, the system will automatically send a new SimTools code to your registered email address. Next, use this new code to complete the activation process to enable SimTools’ professional services.
Please ensure that the email address provided during the redemption and activation process is valid and accurate to avoid missing important notifications or the delivery of the code. If you have any questions or issues, refer to the FAQs on the redemption page or contact the customer service team for assistance.
What are the assembly recommendations and safety warnings for the THERMALTAKE GM5 3DOF?
It is recommended to have at least two people working together for assembly.
It is recommended to have three people lifting the simulator to a height of 20cm.
Do not connect the power supply until assembly is complete.
Under no circumstances should you position yourself directly above the motor column to avoid accidental injury.
During adjustment and wiring of the control box, press the emergency stop switch to ensure safety.
When using the motion system, ensure the surrounding area is clear of obstacles.
Stop the motion system via the software interface or emergency stop switch and confirm it has fully stopped before leaving the simulator.
Do not disassemble the motor column or control box unless you are certified factory personnel.
What is the recommended load limit and usage time for the THERMALTAKE GM5 3DOF?
When the total load exceeds 200kg (440lbs), please limit continuous gameplay to no more than 4 hours to prevent slower motion system feedback and increased wear on internal components.
What are the specifications of the THERMALTAKE GM5 3DOF?
| Payload specification | |
|---|---|
| Payload | 300kg / 661lb |
| Product weight | 27kg / 59.5lb |
| Power requirements | |
| Max power consumption | 1.2kW 220V/5.45Amps, 110V/10.9 Amps |
| Power supply requirements | 110-240 VAC (Manual switch) |
| Connection | USB / Ethernet |
| Maximum velocity | 250 mm/s |
| Maximum acceleration | 0.4 G |
| Actuator stroke | 100 mm / 3.93 in |
| Latency | <5 ms |
| Maximum control frequency | 1000 Hz |
| Vibration frequency range | 0-100 Hz |
What parts are included with the THERMALTAKE GM5 3DOF?
A (x4) – Actuator
B – Control Box
C (x4) – Connector
D – Emergency Stop
E (x4) – Foot Pad
F (x16) – M8 Sliding Nut
G (x8) – Cable Clip
H (x16) – M8x16 Screw
I (x16) – M8x20 Screw
J (x16) – M8 Lock Nut
K – USB-A to USB-B Cable
L – Power Cable (US, EU, UK, and Australian plugs are included.)
M (x1) – 5mm Allen Key
N (x1) – 13mm Wrench
What is the correct orientation and layout for the components of the THERMALTAKE GM5 3DOF?
The system is divided into four corners relative to the user’s seated position:
RIGHT FRONT: Where the pedals are located on the user’s right.
LEFT FRONT: Where the pedals are located on the user’s left.
RIGHT REAR: Where the chair is located on the user’s right.
LEFT REAR: Where the chair is located on the user’s left.
The control box diagram shows corresponding ports for each corner: RIGHT FRONT, LEFT REAR, RIGHT REAR, and LEFT FRONT.
What do the indicator lights on the THERMALTAKE GM5 3DOF control box mean?
Two white lights (A1 & A2): Power is working normally. (No action required)
Green light (B): Device is operating normally. (No action required)
Red light (C): Emergency stop is activated. Release the emergency stop button to its normal position to restore device operation.
Red and green lights (B & C) flash: Missing parameters. Contact the place of purchase for assistance.
CLICK HERE TO DOWNLOAD THERMALTAKE GM5 3DOF (01) PDF DOCUMENT