Free English TASCAM MP-800U (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD TASCAM MP-800U (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How can I check the firmware version of my TASCAM MP-800U?
To check the firmware version of your TASCAM MP-800U, please follow these steps:
1. Press the POWER switch to turn the unit on. Wait until the startup logo disappears and the function name (e.g., “USB”) is shown at the top left of the screen. The MAIN version will be shown on the screen (e.g., Information MAIN ver 1.01).
2. Press the main unit HOME/MENU button or remote control MENU button to open the Menu Screen.
3. Select “Information” by turning the main unit MULTI JOG dial or using the remote control ◄/► buttons and press the main unit MULTI JOG dial or remote control ENTER button.
4. Turn the main unit MULTI JOG dial clockwise or use the remote control [►] button to show the SUB version (e.g., Information SUB ver 0.31).
5. Turn the main unit MULTI JOG dial clockwise or use the remote control [►] button to show the serial number (e.g., Information S/N 2540001).
6. Press the main unit MULTI JOG dial or remote control ENTER button to return to the Menu Screen.
7. Press the main unit BACK [PAIRING] button or remote control [^] button to return to the Home Screen.
How do I update the firmware on my TASCAM MP-800U using a USB flash drive?
To update the main firmware (MCU and SUB) of your TASCAM MP-800U, follow these steps:
Important: While updating, do not turn the power OFF. Doing so could damage the firmware, making further updating and ordinary operation impossible.
1. Obtain the latest firmware file for the TASCAM MP-800U.
2. Decompress the downloaded file if it is in ZIP format or another compressed file type. Copy the firmware file to the root folder of a USB flash drive. Do not change the file name.
3. If the unit is on, press the POWER switch to turn it off.
4. Connect the USB flash drive to the USB FLASH DRIVE port on the front panel.
5. Press the POWER switch to turn the unit on. The startup screen will be shown, displaying the current version and then the new version builds (e.g., “Update Mode Crr Version 1.01”, “Update Mode Main Build 01.01”, “Update Mode Sub Build 01.01”).
6. The “Version Up” screen will appear with “>OK< CANCEL" displayed. Select OK by turning the main unit MULTI JOG dial or using the remote control ◄/► buttons, and then press the main unit MULTI JOG dial or remote control ENTER button. The screen will show the current and update versions (e.g., V1.01 >> V1.02 Push Play).
7. Press the PLAY button to start the update process. The screen will display “Updating >—< Don't Power Off". The number of rectangles between > and < will increase to show the update progress.
Important: Never disconnect the power cable during this operation or the firmware could be miswritten, causing the unit to not restart up.
8. When the update completes, the message “Complete! Please Power Off” will appear.
9. Press the POWER switch to turn the unit off.
10. Disconnect the USB flash drive. You can now press the POWER switch to turn the unit on again if needed.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD TASCAM MP-800U (01) PDF DOCUMENT