SYLVANIA SDVD7750 (01) PDF MANUAL

SYLVANIA SDVD7750 (01) PDF SUMMARY:

What safety precautions should I take when operating the device?

• Read the instruction manual carefully and follow all the requirements of safe operation to operate the device.
• Do not use or leave the device in direct sunlight or a hot environment such as a vehicle etc. that is in a hot environment. Overheating can damage the device
• Device should be protected from any physical impact or damage and care should be taken not to drop the device
• Only use the factory-supplied charger.
• Do not disassemble, puncture, crush, or expose your device to temperatures above 40 °C / 104 °F
• Keep your device away from fire or water.
• Keep your device from moisture and extreme temperatures.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Unplug this unit during lightning storms or when unused for a long time.
• About Cleaning: Unplug the system, use only a wet cloth to clean. Do not use liquid detergent or aerosol.
• Refer all servicing to qualified service personnel, servicing is required when the unit has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the unit, exposed to moisture, does not operate normally. Don’t try to repair the machine by yourself because of the danger of high voltage and electric shock.
• Do not use irregular shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction.

---

What do the symbols on the device mean?

• The light flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompanying the appliance.

---

What should I do if the DVD player causes harmful interference to radio or television reception?

Try one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

---

How do I connect the unit to power using the AC power wall adapter?

Plug one end of the AC power Wall adapter into the DC IN 12V jack on the right of the machine, then plug the other end into the AC power receptacle.

---

How do I connect the unit to power using the DC power car adapter?

Plug one end of the DC power car adapter into the DC IN 12V jack on the unit, and plug the other end into the car cigarette lighter socket.

---

What should I note when using the DC power car adapter?

• The DC power car adapter is available to use only when the car cigarette lighter is with DC 12V negative grounding.
• The mains plug is used as the disconnect device, the disconnect device should remain readily operable.

---

How do I connect the unit to an external LCD monitor?

Connect the unit to power by AC power Wall adapter or DC power car adapter. Then connect the unit DC OUT jack to DC IN 12V Jack of the LCD Monitor by a DC/AV cable. Also, use this DC/AV cable to connect the AV OUT jack of the unit to AV IN jack of the Monitor.

---

What is the recommended way to supply power to both units?

Supply both units with power by the cigarette lighter adapter only. The AC power Wall adapter is used to supply power to one unit only and as the charger to charge the main unit if it’s with a built-in battery.

---

How do I install the DVD player/monitor in the car?

1. Fit the straps to the DVD Player/ Monitor as required. Please install the units with strap A (long) and strap B (short) together.
2. Fitting the straps to the headrest:
   • Fit the straps around the headrest and engage the 2 trident clips. Ensure clips are securely fastened.
   • Pull the straps tight using the adjustment. Tuck the loose ends into the strap tidy.
   • The end of the strap through from the second hole of buckle back
   • Turn to buckle front, the end of the strap through from first hole
   • Finally, you can adjust the strap length to fit your car headrest

---

What should I consider regarding different car headrests during installation?

Due to different cars with different headrests, small or big, the rest strap length will be different.

---

Where is it recommended to install the DVD player for a neat cable run to the monitor?

For unit installation, it is recommended that the DVD Player is on the LEFT headrest, to ensure a neat cable run to the monitor.

---

How do I play a DVD, CD, or MP3 disc?

1. Connect the unit to the power.
2. Open the unit and adjust the monitor to the best position for viewing.
3. Turn on the unit by sliding the ON/OFF switch to ON.
4. Open the disc door and insert a disc into the door with the label side facing up.
5. Close the disc door. The unit will load the disc and start playing.
6. During playback, press “~11” to pause; press it again to resume playback.
7. When playing a disc of DVD, CD, Press …, the unit will search forward. Press ii repeatedly, the unit will play at 2, 4, 8, 16, 32 times of speed. press “.-i”, the unit will search backward. Press it repeatedly, the unit will play at 2, 4, 8, 16, 32 times of speed.
8. Press" ■" once to stop playback; then press “~11” to resume playback from the point where you stopped; press " ■ " twice to stop playback completely.
9. When the playing is finished, please turn off the power by sliding the ON/OFF switch to OFF.

---

How do I use the virtual remote operation?

1. Press the “FUNCTION” button when a disc is playing to see a virtual remote control.
2. The virtual key is shown on the left of the menu, and the current playback status is displayed on the right.
3. Use the t+4/…, ,~ , … button to choose the icon, when the icon is selected, you can see the description at the bottom.
4. Press the OK button, the selected virtual key will be activated, and the “OK=Selected function” icon will be shown at the top left for 10 seconds; in these 10 seconds, you just need to press the OK button to change the style of the function. If the icon disappears, the OK key will not work (For Search, Return, Mute, the icon won’t be shown).
5. You can also press the “FUNCTION” button to close the virtual remote menu without any operation. The player will resume playing after the menu exit.

---

What should I note about the function button?

• When the disc is in the submenu, press the “FUNCTION” key to go back to the title menu.
• In stop or no disc state, the “FUNCTION” is invalid.

---

How do I use the search (SRH) function in virtual remote operation?

Press the “SRH” key, you can see the number bar below, Use left/right key to move the cursor, press ok to confirm, when playing DVD, you can change the chapter and the title, press the "TIC " icon change the item you want to change. When playing CD, you can select the track. Note: To select the title, you need to enter two numbers.

---

What virtual remote operations are available?

• M (Menu): to enter menu root.
• ZOOM: When playing DVD discs, you can zoom in, press the “ZOOM” button and ok button to change the image size according the following sequence: x2 x3 x4, when playing JPEG file, you can zoom in and zoom out, press the “ZOOM” button and ok button to change the image size according the following sequence: 100% 125% 150% 200% 75% 50%.
• TT (Title): to display title information.
• ADO (Audio): to select audio language.
• SUB (Subtitle): to select subtitle language when playing DVD disc.
• OSD: Display the disc information during playing DVD/CD. Such as elapsed time and remaining time.
• u (Repeat): When playing disc of DVD/CD/MP3, you can change the repeat style by press repeat button. For different type of disc, it change according different sequence.
  • DVD: ~ Chapter___. ~ Title ___. ~ All ___. Repeat off
  • MP3: ~ One ___. ~ Folder ___. Repeat off
  • CD: ~ Track ___. ~ All ___. Repeat off
• Slow: You can press slow key to change the playing speed slowly during playing DVD. Then press OK repeatedly to change the playback speed according to the following sequence: 1/2 1/4 1/8 1/16.
• (Return): to return to the menu.
• t(j (MUTE): to turn mute.
• Angle: When playing a DVD disc with multi-angles, press “Angle” button and OK button to change the display angle. Note: The function is available only for disc with multi-angle.

---

How do I play a JPEG file?

1. Place a JPEG disc into the tray, and the unit will start reading and playing.
2. Press "1+1 _ … and OK button to select a JPEG file from the menu.
3. Press “…- ~” to rotate the picture clockwise.
4. Press … _" to reverse the picture horizontally and press “1+1” to reverse the picture vertically.

---

What function operations are available when playing a JPEG file?

Press the ~1 … to move the cursor to select functions. Press “OK” to select the function.

• ~ : Return, to return to the main menu.
• i:::J : To repeat one, repeat all.
• : To zoom in/out the image during playback.

Press “FUNCTION” to exit the toolbar.

---

How do I play an MP3 file?

1. Place a MP3 disc into the disc door.
2. Press "1+1 _ … to select the file; Press OK button to play the file selected.

---

What function operations are available when playing an MP3 file?

Press the .-./-.to move the cursor to select functions, Press the number key to select the track. Press “OK” to select the function.

• ~ : MUTE, to turn mute.
• 0 : To select repeat one, repeat folder, repeat off.

Press “FUNCTION” to exit the toolbar.

---

How do I access the setup menu?

Press the Setup button; the main menu will be displayed on the screen.

---

How do I navigate and make selections in the setup menu?

• In the General Setup Page, Press ~ button to highlight this item.
• Press OK button to access.
• Press ~ ~ button to select the setting.
• Press OK button to confirm your selection.
• Press +I button to exit.

---

How do I set the screen display format?

Enter the TV Display option; the user can set the screen display format (Normal/PS, Normal/LB, Wide). The default is “Wide.”

---

What should I choose when using a 16:9 wide screen TV set?

Please choose “Wide (16:9)” when using … ◄ ► a 16:9 wide screen TV set.

---

How do I set the angle display during playback?

Enter the Angle Mark option to set the angle during playback.

---

How do I set the OSD menu language?

In the OSD Language option, the user can set the OSD menu language (English). The default is English.

---

How do I activate or deactivate the screen saver function?

Enter the Screen Saver option to set whether to activate the screen saver function. The default is ON.

---

How do I set Text to Speech?

Enter this option to set Text to speech. Optional setting: On,Off. The default is : Off.

---

How do I select the TV type (PAL, NTSC)?

Enter this option to select TV type (PAL, NTSC). The default is NTSC.

---

How do I select a preferred audio language for DVDs?

Enter this option; the user can select a preferred audio language for DVDs. The default is English.

---

How do I select a preferred language for subtitles?

Select your preferred language to show the subtitles on the screen. The default is OFF.

---

How do I choose the menu language stored on the disc?

This function allows you to choose the menu language stored on the disc. The default is English.

---

How do I set the parental control level?

Enter this option to set the parental control level to some unsuitable disc scenes being watched by the children. Optional parental control levels: KID SAFE, G, PG, PG 13, PGR, R, NC17, ADULT. The default of this option is ADULT.

---

What is the password to make continuously pressing the “FUNCTION” button on the unit 4 times?

Make continuously pressing the “FUNCTION” button on the unit 4 times to be the password.

---

How do I reset all settings to the original factory settings?

Select the Default item and press the OK button to reset all settings to the original factory settings.

---

What should I do if the display shows “No disk” after inserting a DVD?

1. Check to see if you may have inserted a blank disc.
2. Remove the disk and check to ensure that the disc is clean and not scratched.
3. Check to see if you may have inserted a disc that has not yet been finalized.
4. Check to see if you may have inserted the disc correctly; please remove and try to insert the disc correctly.
5. Try to play the original DVD disk. Please note that some DVD players cannot recognize improperly burned disks.
6. Use a lens cleaning disk or gently wipe the laser pickup lens with a dry microfiber cloth.

---

What should I do if there is no sound or distorted sound?

Make sure the machine is connected properly. Make sure all cables are securely inserted into the appropriate jacks.

---

Why can’t I advance through the opening credits and warning information at the beginning of movies?

You can’t advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action.

---

Why does the icon appear on the screen?

The feature or action cannot be completed at this time because:

1. The disc’s software restricts it.
2. The disc’s software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number that is out of range.

---

What should I do if the picture is distorted?

The disc might be damaged. Try another disc; It is normal for some distortion to appear during forward or reverse scan.

---

Why is there no forward or reverse scan?

Some discs have sections that prohibit rapid scanning or chapter skip; If you try to skip through the warning information and credits at the beginning of a movie, you won’t be able to. This part of the movie is often programmed to prohibit skipping through it.