SWIT SL-100P (02) PDF MANUAL

Feature	SL-100P	SL-150P
Model	SL-100P	SL-150P
Number of the lamps	560pcs	840pcs
Color Temperature	2700K-6500K
Brightness	0%-100%
Luminance	2800 Lux/1m; 430 Lux/3m; 170 Lux/5m	4100 Lux/1m; 640 Lux/3m; 260 Lux/5m
Beam angle	10°-360°
CRI	97
TLCI	97
Input Power	100W	150W
Working Voltage	DC 11-36V/AC100-240V(50/60Hz)
Dimensions	600mm x 470mm	600mm x 690mm
Weight	Light body: 0.4g Controller: 1.06Kg Adaptor: 0.58Kg	Light body: 0.7Kg

1. Avoid disassembling the fixture or using metal objects on the control box to prevent damage;

2. Store the light in a clean, dry environment to maintain optimal performance;

3. Prevent scratches on the light body from hard objects to ensure effective use;

4. Clean minor oil stains or dirt on the surface with a soft cloth;

5. Use this product within the temperature range of -10°C to 40°C.

The components shown on the back view (Fig. 3) are:

(2) Light strips

(3) Light input connection cable

(4) X bracket

(5) Light body

(6) Magic sticker

The controller components are identified as follows (referencing Fig. 4 and Fig. 5):

⑦ Color temp indicator light

⑧ Color temp knob

⑨ Brightness knob

⑩ Brightness indicator light

⑪ LCD screen

⑫ DMX OUT

⑬ DMX IN

⑭ Control box output cable

⑮ Power switch

⑯ DC 11-36V IN

⑰ Battery plate

⑱ USB interface

The LCD screen displays different information depending on the mode. Using “CCT=5600K, Dimmer=100%, DMX address:008 (Group:8)” as an example:

DMX Mode (Fig. 6): Shows “DMX 008”, “Dimmer 100%”, “Color 5600K”.

– ① Control Mode—DMX Mode

– ② Current Brightness

– ③ Current DMX Address

– ④ Current Color Temperature

Brightness Interface (Fig. 7): Shows “Dimmer 100%”.

DMX Address Interface (Fig. 8): Shows “DMX 008”.

– ⑤ Current setting number

Group Control Mode (Fig. 9): Shows “Group 8”, “Dimmer 100%”, “Color 5600K”.

– ⑥ Control Mode—Group Control Mode

– ② Current Brightness

– ④ Current Color Temperature

– ⑦ Group Number

Color Temperature Interface (Fig. 10): Shows “Color 5600K”.

Group Interface (Fig. 11): Shows “Group 8”.

This product can be flexibly bent and positioned according to user needs, whether it’s fixed on the back of a chair, the roof of a car, or any other confined space. Alternatively, as shown in Fig. 3, you can use the X bracket (4) to support the light (5).

Note: For users who purchase the curved soft cover or egg crate soft box, follow the steps in Fig. 3 to support the light, then securely attach the assembled soft cover or soft box using the magic sticker (6) for normal use.

This product supports two power supply options: batteries (using the battery plate Fig. 5⑰) or an AC adapter (connected to DC 11-36V IN Fig. 5⑯). The working voltage is DC 11-36V or AC 100-240V (50/60Hz).

1. After installing the light according to your needs, securely connect the control box output cable (Fig. 4⑭) with the light input connection cable (Fig. 3③).

2. Connect a power source (battery or AC adapter).

3. Turn on the power switch (Fig. 5⑮).

4. Set the desired light parameters (brightness, color temperature, mode).

5. The light can be used normally.

Adjust the color temperature and brightness parameters by rotating the Color Temperature/Brightness knob (Fig. 4 ⑧/⑨).

• Color temperature adjustment range: 2700K-6500K, with a minimum step of 50K.

• Brightness adjustment range: 0%-100%, with a minimum step of 1%.

Long-press the color temperature adjustment knob (Fig. 4⑧) for approximately 2 seconds to switch between DMX Communication Mode (Fig. 6) and Group Control Mode (Fig. 9).

1. Long-press the brightness adjusting knob (Fig. 4⑨) for approximately 2 seconds to enter the DMX address setting interface (Fig. 8).

2. Use the brightness adjusting knob (Fig. 4⑨) to set the DMX address parameter within the range of 001-512.

3. Rotate the knob to set the current bit (digit).

4. Press the knob to confirm the current bit setting and move on to the next bit setting.

5. To exit the DMX communication address setting interface, either wait for about 5 seconds after stopping the operation or switch the current address parameter setting bit to the last bit and press the brightness adjusting knob again.

After setting the DMX address parameters according to your needs, connect the light to the DMX control device through a DMX cable (using DMX IN Fig. 5⑬ and DMX OUT Fig. 4⑫ for linking) to enable normal usage. This product occupies a total of two DMX control channels. If you set the DMX address (N) for brightness control, address (N+1) will be used for color temperature control.

DMX Address	DMX Channel	Function
008 (Example N)	008 (N)	Brightness adjusting: 0%-100%
	009 (N+1)	Color temperature adjusting: 2700K-6500K

1. Ensure you are in Group Control Mode (Fig. 9).

2. Long-press the brightness adjusting knob (Fig. 4⑨) for approximately 2 seconds to enter the Group parameters setting interface (Fig. 11).

3. Use the brightness adjusting knob (Fig. 4⑨) to set the Group parameters within the range of 1-8.

4. After stopping the operation, wait for about 5 seconds or press the brightness adjusting knob to exit the Group parameters setting interface.

1. Set the Group parameters (1-8) according to your needs on each light you want to control together.

2. Set the target lights to the same Group number.

3. Network the lights through a DMX cable (linking DMX OUT to DMX IN between controllers).

4. The lights can be used normally without distinguishing between master and slave machines. Adjusting parameters on one light in the group will adjust all lights in that group.

Note: When using the group control function, do not connect DMX signal output devices (like a DMX console) in the light network; otherwise, the function cannot be used properly.

The USB Interface (Fig. 5⑱) is a reserved port. Please use it according to the specified environment of the company’s relevant products. Do not use it for other purposes to avoid potential losses.

No.	Details	Quantity
1	X-bracket	x 1
2	Clam	x 1
3	Power Cable	x 1
4	Adaptor	x 1
5	Light bag	x 1
6	Soft box (Option)	Customers can purchase separately according to their needs
7	Eggcrate (Option)